Spectrum characteristics and light source selection for infrared thermal imaging testing of semitransparent materials
-
摘要: 对半透明材料的光激励红外检测，其热激励机理与不透明材料不同，试件的吸热依赖于材料的光学特性和光源的辐射光谱。基于半透明材料的光谱特性，提出了体加热的物理机制和建模方法。为了获得材料的光谱吸收率，测试了不同厚度下玻璃纤维复合材料在一定波长范围内光的反射率和透射率。以色温模型来描述加热灯的光谱特性，用有限单元法分析了闪光灯色温对缺陷检测效果的影响，给出了可检信息参数（最大温差和最大对比度）与闪光灯色温的关系。结果表明，最大温差和最大对比度与色温呈非线性关系，它们随色温升高先减小后增大，因此低色温和高色温闪光灯对半透明复合材料检测更有利。所得结论为半透明复合材料的闪光灯激励红外检测提供了理论参考。Abstract: In the case of infrared thermography of semitransparent materials, the heat stimulation mechanism differs from that of opaque materials, and the heat absorption of a specimen depends on its optical properties and the radiation spectrum of a light source used. Based on the spectrum characteristics of semitransparent materials, a body heating mechanism and modelling were proposed. To obtain the spectrum absorptivity of the materials, the reflectivity and transmittance of the glass fiber reinforced plastics with different thicknesses were measured in a certain wavelength range. The spectrum characteristics of heating lamps were described by a color temperature model, the effect of the color temperature of a flash on the flaw detection was analyzed by using finite element method, and the relationships between the detectable information parameters(the maximum temperature difference and maximum contrast) and the flash color temperature were presented. The results show that the maximum temperature difference and maximum contrast are a nonlinear function of the color temperature, and they decrease first and then increase when the color temperature increases, so a low or high color temperature is more favorable for the inspection of semitransparent composite materials. The conclusions provide a theoretical reference for the flash infrared thermography of semitransparent composite materials.
-
[1] Siegel R. Transient effects of radiative transfer in semitransparent materials[J]. International Journal of Engineering Science, 1998, 36:1701-1739. [2] Mandler W F, Yonushonis T M. Commercial applications for advanced ceramics in diesel engines[J]. Ceramic Engineering and Science Proceedings, 2009, 22(3):3-10. [3] Myers D E, Martin C J, Blosser M L. Parametric Weight Comparison of Advanced Me-tallic, Ceramic Tile, and Ceramic Blanket Thermal Protection Systems[R]. NASA Langley Technical Report, 2000:1-44. [4] Heinrich J G, Aldinger F. Ceramic Materials and Components for Engineers[M]. Germany:Wiley-VCH Verlag GmbH, 2007:653-656. [5] Tan Heping, Xia Xinlin, Liu Linhua, et al. Numerical Calculation of Infrared Radiation Characteristics and Transmission:Computational Thermal Radiation[M]. Harbin:Harbin Institute of Technology Press, 2006:1-14. (in Chinese)谈和平, 夏新林, 刘林华, 等. 红外辐射特性与传输的数值计算:计算热辐射学[M]. 哈尔滨:哈尔滨工业大学出版社, 2006:1-14. [6] Siddiqui J A, Arora V, Mulaveesala R, et al. Infrared thermal wave imaging for nondestructive testing of fibre reinforced polymers[J]. Experimental Mechanics, 2015, 55(430):1-7. [7] Tan Q J, Dai J M, Bu C W, et al. Experimental study on debonding defects detection in thermal barrier coating structure using infrared lock-in thermographic technique[J] Applied Thermal Engineering, 2016, 107(8):463-468. [8] Wang L, Eldridge J I, Guo S M. Comparison of different models for the determination of the absorption and scattering coefficients of thermal barrier coatings[J]. Acta Materialia, 2014, 64(64):402-410. [9] Shepard S M, Hou Y L, Lhota J R, et al. Thermographic measurement of thermal barrier coating thickness[C]//Proceedings of SPIE, 2005, 5782:407-410. [10] Li Yanhong, Zhao Yujing, Zhang Cunling. Infrared testing for translucent material coating[J]. Optics and Precision Engineering, 2009, 17(7):1502-1506. (in Chinese)李艳红, 赵跃进, 张存林. 半透明材料涂层的红外检测[J]. 光学精密工程, 2009, 17(7):1502-1506. [11] ASTM Committee. E 2582-07, Standard practice for infrared flash thermography of composite panels and repair patches used in aerospace applications[S]. USA:ASTM international, 2007. [12] Astm E 2533-09 Standard guide for nondestructive testing of polymer matrix composites used in aero-space applications[S], 2009. [13] Dai Caihong, Yu Jialin. Discussion on the calculating me-thods for color temperature of the Source[J]. Acta Metrologica Sinica, 2000, 21(3):183-188. (in Chinese)代彩红, 于家琳. 光源相关色温计算方法的讨论[J]. 计量学报, 2000, 21(3):183-188. [14] Li Jingzhen. Handbook of Optics[M]. Xi'an:Shaanxi Science and Technology Press, 2010:501-502. (in Chinese)李景镇. 光学手册[M]. 西安:陕西科学技术出版社, 2010:501-502. [15] Cai Lvzhong. Optics[M]. 3rd ed. Beijing:Science Press, 2007:354-355. (in Chinese)蔡履中. 光学[M]. 北京:科学出版社, 2007:354-355. -
点击查看大图
计量
- 文章访问数: 405
- HTML全文浏览量: 54
- PDF下载量: 116
- 被引次数: 0
下载:
