|
[1]
|
Qin Lanyun, Wang Wei, Yang Guang, et al. Experimental study on ultrasonic-assisted laser metal deposition of titanium alloy[J]. Chinese Journal of Lasers, 2013, 40(1):0103001. (in Chinese)钦兰云, 王维, 杨光, 等. 超声辅助钛合金激光沉积成形实验研究[J]. 中国激光, 2013, 40(1):0103001. |
|
[2]
|
Wang Xiangming, Liu Wenting. Design and Application of Aircraft Structure of Titanium Alloy[M]. Beijing:National Defence Industry Press, 2010:14. (in Chinese)王向明, 刘文廷. 飞机钛合金结构设计与应用[M]. 北京:国防工业出版社, 2010:14. |
|
[3]
|
Lu Bingheng, Li Dichen. Development of the additive manufacturing (3D printing) technology[J]. Mechanical Building and Automation, 2013, 42(4):1-4. (in Chinese)卢秉恒, 李涤尘. 增材制造(3D打印)技术发展[J]. 机械制造与自动化, 2013, 42(4):1-4. |
|
[4]
|
Qian Yuanhong, Tan Hua, Li Jing, et al. Microstructure characterization of laser solid forming Ti-6Al-4V alloy by high power[J]. Rare Metal Materials and Engineering, 2014, 43(9):2162-2166. (in Chinese)钱远宏, 谭华, 李静, 等. 高功率激光立体成形Ti-6Al-4V合金组织研究[J]. 稀有金属材料与工程, 2014, 43(9):2162-2166. |
|
[5]
|
Lin Xin, Xue Lei, Chen Jing, et al. Laser forming repair of titanium alloy parts[J]. Aeronautical Manufacturing Technology, 2010, 35(8):55-58. (in Chinese)林鑫, 薛雷, 陈静, 等. 钛合金零件的激光成形修复[J]. 航空制造技术, 2010, 35(8):55-58. |
|
[6]
|
Gao Xuesong, Huang Yinhui, Tian Zongjun, et al. Erosive wear resistance behavior of laser cladding Al2O3+13% TiO2 coating prepared by plasma spraying on titanium alloy surface[J]. Chinese Journal of Lasers, 2010, 37(3):858-862. (in Chinese)高雪松, 黄因慧, 田宗军, 等. 钛合金表面激光熔覆等离子体喷涂Al2O3+13% TiO2涂层冲蚀磨损性能[J]. 中国激光, 2010, 37(3):858-862. |
|
[7]
|
Feng Shurong, Zhang Shuquan, Wang Huaming, et al. Wear resistance of laser clad hard particles reinforced intermetallic composite coating on TA15 alloy[J]. Chinese Journal of Lasers, 2012, 39(2):0203002. (in Chinese)冯淑容, 张述泉, 王华明, 等. 钛合金激光熔覆硬质颗粒增强金属间化合物复合涂层耐磨性[J]. 中国激光, 2012, 39(2):0203002. |
|
[8]
|
Li Huaixue, Gong Shuili, Sun Fan, et al. Development and application of laser additive manufacturing for metal component[J]. Aeronautical Manufacturing Technology, 2012, 37(2):25-31. (in Chinese)李怀学, 巩水利, 孙凡, 等. 金属零件激光增材制造技术的发展及应用[J]. 航空制造技术, 2012, 37(2):25-31. |
|
[9]
|
Wang Huaming, Zhang Shuquan, Wang Xiangming, et al. Progress and challenges of laser direct manufacturing of large titanium structural components[J]. Chinese Journal of Lasers, 2009, 36(12):3204-3209. (in Chinese)王华明, 张述泉, 王向明, 等. 大型钛合金结构件激光直接制造的进展与挑战[J]. 中国激光, 2010, 36(12):3204-3209. |
|
[10]
|
Wang Huaming. Materials fundamental lssues of laser additive mantufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica, 2014, 35(10):2690-2698. (in Chinese)王华明. 高性能大型金属构件激光增材制造:若干材料基础问题[J]. 航空学报, 2014, 35(10):2690-2698. |
|
[11]
|
Zhang Wei, Yao Jianhua, Dong Chenhui, et al. Repairing and strengthening of eroded turbine blades by laser technology[J]. Journal of Power Engineering, 2008, 28(6):967-971. (in Chinese)张伟, 姚建华,董辰辉,等.汽轮机叶片冲蚀区的激光修复与强化[J]. 动力工程, 2008, 28(6):967-971. |
|
[12]
|
Dong Shiyun, Zhang Xiaodong, Xu Binshi, et al. Laser cladding remanufacturing of 45 steel cam shaft worn cam[J]. Journal of Academy of Armored Force Engineering,2011, 25(2):85-88. (in Chinese)董世运, 张晓东, 徐滨士, 等. 45钢凸轮轴磨损凸轮的激光熔覆再制造[J]. 装甲兵工程学院学报, 2011, 25(2):85-88. |
|
[13]
|
Xu Songhua, Xiao Yang, Li Jian, et al. Organization property researches of the laser repair technology in the helicopter engine turbine oriented implement[J]. Acta Optica Sinica,2010, 30(8):2311-2316. (in Chinese)徐松华, 肖阳,李健,等. 直升机发动机涡轮导向器激光修复组织性能研究[J]. 光学学报, 2010, 30(8):2311-2316. |
|
[14]
|
Srn Ocylok, Eugen Alexeev, Stefan Mann, et al. Correlation of melt pool geometry and process parameters during laser metal deposition by coaxial process monitoring[J]. Physics Procedia, 2014, 56:228-238. |
|
[15]
|
Surez A, Amado J M, Tobar M C, et al. Study of residual stresses generated inside laser cladded plates using FEM and diffraction of synchrotron radiation[J]. Surface and Coatings Technology, 2010, 204:1983-1988. |
|
[16]
|
Arisa Farahmand, Radovan Kovacevic. An experimental-numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser[J]. Optics Laser Technology, 2014, 63:154-168. |
|
[17]
|
Boris Rottwinkel, Christian Nlke, Stefan Kaierle, et al. Crack repair of single crystal turbine blades using laser cladding technology[J]. Procedia CIRP, 2014, 22:263-267. |
|
[18]
|
J Michael Wilson, Cecil Piya, Yung C Shin, et al. Remanufacturing of turbine blades by laser direct deposition with its energy and environment impact analysis[J]. Journal of Cleaner Production, 2014, 80:170-178. |
|
[19]
|
Wang Xiaoyan, Chen Jing, Lin Xin, et al. Microstructure of laser forming repair 7050 aluminum alloy with AISi12 powder[J]. Chinese Journal of Lasers, 2009, 36(6):1585-1590. (in Chinese)王小艳, 陈静, 林鑫, 等. AlSi12粉激光成形修复7050铝合金组织[J]. 中国激光, 2009, 36(6):1585-1590. |
|
[20]
|
Gong Xinyong, Liu Mingkun, Li Yan, et al. Research on repair of TC11 titanium alloy components by laser melting deposition process[J]. Chinese Journal of Lasers, 2012, 39(2):0203005. (in Chinese)宫新勇, 刘铭坤, 李岩, 等. TC11钛合金零件的激光熔化沉积修复研究[J]. 中国激光, 2012, 39(2):0203005. |
|
[21]
|
Ren Huifang, Ren Jialong, Wang Qingxian. Simulation analysis on the laser cladding repair material selection of disel engine crankshaft crack[J]. Journal of Xuzhou Institute of Technology, 2013, 28(3):69-72. (in Chinese)任会芳, 任家隆, 王青仙. 柴油机曲轴裂纹激光熔覆修复材料选择的仿真研究[J]. 徐州工程学院学报, 2013, 28(3):69-72. |
|
[22]
|
Nickel A H, Barnett D M, Prinz F B. Thermal stress and deposition patterns in layered manufacturing[J]. Materials Science and Engieering A, 2001, 317:59-64. |
|
[23]
|
He Bin, Li Dichen, Zhang Anfeng, et al. Influence of scanning pattern on the edge collapse of solid parts in laser metal direct forming[J]. Optics Laser Technology, 2013, 48:171-177. |
点击查看大图
下载:
