深孔内表面结构光三维重构

丁超; 唐力伟; 曹立军; 邵新杰; 邓士杰

doi:10.3788/IRLA201847.1117004

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

深孔内表面结构光三维重构

丁超, 唐力伟, 曹立军, 邵新杰, 邓士杰

文章导航 > 红外与激光工程 > 2018 > 47(11): 1117004-1117004(7)

丁超, 唐力伟, 曹立军, 邵新杰, 邓士杰. 深孔内表面结构光三维重构[J]. 红外与激光工程, 2018, 47(11): 1117004-1117004(7). doi: 10.3788/IRLA201847.1117004

引用本文:

丁超, 唐力伟, 曹立军, 邵新杰, 邓士杰. 深孔内表面结构光三维重构[J]. 红外与激光工程, 2018, 47(11): 1117004-1117004(7). doi: 10.3788/IRLA201847.1117004

Ding Chao, Tang Liwei, Cao Lijun, Shao Xinjie, Deng Shijie. 3D reconstruction of deep-hole inner surface using structured light[J]. Infrared and Laser Engineering, 2018, 47(11): 1117004-1117004(7). doi: 10.3788/IRLA201847.1117004

Citation:

Ding Chao, Tang Liwei, Cao Lijun, Shao Xinjie, Deng Shijie. 3D reconstruction of deep-hole inner surface using structured light[J]. Infrared and Laser Engineering, 2018, 47(11): 1117004-1117004(7). doi: 10.3788/IRLA201847.1117004

深孔内表面结构光三维重构

doi: 10.3788/IRLA201847.1117004

1.
陆军工程大学(石家庄校区) 火炮工程系,河北石家庄 050003;
2.
陆军工程大学(石家庄校区) 车辆与电气工程系,河北石家庄 050003

基金项目:

国家自然科学基金（51575523）

详细信息

作者简介:
丁超(1990-),男,博士生,主要从事机器视觉及数字图像处理方面的研究。Email:duncan1119@163.com

中图分类号: TN247;TP391

3D reconstruction of deep-hole inner surface using structured light

1.
Artillery Engineering Department,Army Engineering University,Shijiazhuang 050003,China;
2.
Vehicle and Electrical Engineering Department,Army Engineering University,Shijiazhuang 050003,China

摘要: 为实现针对深孔内表面几何形状的高精度三维重构，搭建了一套基于结构光的三维检测系统。首先，介绍了该检测系统的构成及相关测量原理，并验证了在某一确定范围内图像距离与实际距离近似呈线性关系，该论断为后续检测奠定了坚实的理论基础；然后，针对深孔模型实物以及对应的内表面展开成平面模型分别进行结构光检测，从而验证了检测方案的可行性以及检测系统的实际效果。结果表明：该检测方案在理论上可行，在实际应用中系统的检测精度能够达到亚像素水平，绝对偏差控制在0.034 7 mm的范围内；最后，在实际应用于深孔类零部件内表面检测的过程中，实现了针对该零部件内表面几何形状的高精度三维重构。
- 深孔 /
- 结构光 /
- 三维重构
Abstract: In order to realize the high precision 3D reconstruction for deep-hole inner surface geometry, a 3D measurement system was built based on the structured light. First, the constitution and relevant measurement principle of the system were introduced, the assertion was proved that the distance between the image and the actual was approximately linear in a given range. The assertion lays a solid theoretical foundation for the following measurement. Then, the deep-hole model object and the model in which the corresponding inner surface was unfolded into a plane which were measured using the structured light. The measurement proves the feasibility of the measurement scheme and the actual effect of the measurement system. The measurement results show that the measurement scheme is feasible in theory, the measurement accuracy of the system can reach sub-pixel in practical applications and the absolute deviation is controlled within 0.034 7 mm range. Finally, in the actual measurement of the inner surface of the deep-hole parts inner surface, the high precision 3D reconstruction for deep-hole inner surface geometry was realized.
- deep-hole /
- structured light /
- 3D reconstruction

[1]	Leng Huiwen, Xu Chunguang, Xiao Dingguo, et al. A method for measuring complicated deep-hole profile using line-structured-light sensor[J]. Transactions of Beijing Institute of Technology, 2013, 33(2):139-143. (in Chinese)
[2]	Ding Zhenglong, Xu Yuetong, Fu Jianzhong. On-line precise measurement principle and system for deep-hole diameter[J]. Journal of Xi'an Jiaotong University, 2015, 49(1):65-71. (in Chinese)
[3]	Xu Jing, Xi Ning, Zhang Chi, et al. Real-time 3D shape inspection system of automotive parts based on structured light pattern[J]. Optics Laser Technology, 2011, 43(1):1-8. (in Chinese)
[4]	Zhang Weiguang, Zhao Hong. Error correction method for three dimensional measurement system with multi-sensor and linear structure light[J]. Journal of Xi'an Jiaotong University, 2011, 45(6):75-80. (in Chinese)
[5]	Barone S, Paoli A, Razionale A V. Shape measurement by a multi-view methodology based on the remote tracking of a 3D optical scanner[J]. Optics and Lasers in Engineering, 2012, 50(3):380-390.
[6]	Li Wei, Sha Aimin, Sun Chaoyun, et al. Joint faulting three-dimension detection method on cement concrete pavement with line-structure light[J]. Journal of Tongji University Natural Science, 2015, 43(7):1039-1044. (in Chinese)
[7]	Wang Ying, Zhang Rui. In-pipe surface circular structured light 3D vision inspection system[J]. Infrared and Laser Engineering, 2014, 43(3):891-896. (in Chinese)
[8]	Leng Huiwen, Xu Chunguang, Xiao Dingguo, et al. A method for measuring complicated deep-hole profile using line-structured-light sensor[J]. Transactions of Beijing Institute of Technology, 2013, 33(2):139-143. (in Chinese)
[9]	Zhang Jinmin. The measurement system of objects' three-dimension figure based on the laser triangulation[D]. Wuhan:Wuhan University of Technology, 2015. (in Chinese)
[10]	Long Xulin. Research on gun barrel bore detecting system based on laser displacement sensor[D]. Nanjing:Nanjing University, 2015. (in Chinese)
[11]	Ding Chao, Tang Liwei, Cao Lijun, et al. The measurement test of the barrel rifling based on the structured light[J]. Optics and Precision Engineering, 2017, 25(4):1077-1085. (in Chinese)

[1]	纪运景, 杜思月, 宋旸, 李振华. 基于线结构光旋转扫描和光条纹修复的三维视觉测量技术研究 . 红外与激光工程, 2022, 51(2): 20210894-1-20210894-9. doi: 10.3788/IRLA20210894
[2]	朱新军, 侯林鹏, 宋丽梅, 袁梦凯, 王红一, 武志超. 基于虚拟双目的条纹结构光三维重建 . 红外与激光工程, 2022, 51(11): 20210955-1-20210955-9. doi: 10.3788/IRLA20210955
[3]	李耀明, 陈淑琴, 张煌. 基于激光谐波调制的深孔内壁三维面型分析系统 . 红外与激光工程, 2022, 51(3): 20210862-1-20210862-6. doi: 10.3788/IRLA20210862
[4]	刘飞, 罗惠方, 江翰立, 张茵楠, 严谨. 改进的三频三步相移结构光三维重建方法 . 红外与激光工程, 2022, 51(4): 20210179-1-20210179-9. doi: 10.3788/IRLA20210179
[5]	汪侃, 龚俊, 魏敬和, 朱策, 刘凯. 邻图配对式运动恢复结构的欧式三维重建 . 红外与激光工程, 2020, 49(6): 20200078-1-20200078-8. doi: 10.3788/IRLA20200078
[6]	Song Limei, Huang Haozhen, Chen Yang, Zhu Xinjun, Yang Yangang, Guo Qinghua. Fast measurement of human body posture based on three-dimensional optical information . 红外与激光工程, 2020, 49(6): 20200079-1-20200079-10. doi: 10.3788/IRLA20200079
[7]	刘晓利, 何懂, 陈海龙, 蔡泽伟, 殷永凯, 彭翔. 结构光三维传感器测量网相关技术 . 红外与激光工程, 2020, 49(3): 0303007-0303007-10. doi: 10.3378/IRLA202049.0303007
[8]	吴庆阳, 黄浩涛, 陈顺治, 李奇锋, 陈泽锋, 卢晓婷. 基于结构光标记的光场三维成像技术研究 . 红外与激光工程, 2020, 49(3): 0303019-0303019-6. doi: 10.3378/IRLA202049.0303019
[9]	宋晓凤, 李居朋, 陈后金, 李丰, 万成凯. 多场景下结构光三维测量激光中心线提取方法 . 红外与激光工程, 2020, 49(1): 0113004-0113004(8). doi: 10.3788/IRLA202049.0113004
[10]	伏燕军, 韩勇华, 陈元, 张鹏飞, 桂建楠, 钟可君, 黄采敏. 基于相位编码的三维测量技术研究进展 . 红外与激光工程, 2020, 49(3): 0303010-0303010-15. doi: 10.3788/IRLA202049.0303010
[11]	马乐, 陆威, 姜鹏, 刘迪, 王鹏辉, 孙剑峰. 基于匹配滤波的Gm-APD激光雷达三维重构算法研究 . 红外与激光工程, 2020, 49(2): 0205006-0205006. doi: 10.3788/IRLA202049.0205006
[12]	吕磊, 贾钊逸, 吴珂, 栾银森. 基于相移法的多目标运动物体三维重构 . 红外与激光工程, 2020, 49(3): 0303011-0303011-5. doi: 10.3788/IRLA202049.0303011
[13]	左超, 张晓磊, 胡岩, 尹维, 沈德同, 钟锦鑫, 郑晶, 陈钱. 3D真的来了吗？— 三维结构光传感器漫谈 . 红外与激光工程, 2020, 49(3): 0303001-0303001-45. doi: 10.3788/IRLA202049.0303001
[14]	张启灿, 吴周杰. 基于格雷码图案投影的结构光三维成像技术 . 红外与激光工程, 2020, 49(3): 0303004-0303004-13. doi: 10.3788/IRLA202049.0303004
[15]	丁忠军, 赵子毅, 张春堂, 潘文超, 刘雨萌. 载人潜水器的深海地貌线结构光三维重建 . 红外与激光工程, 2019, 48(5): 503001-0503001(9). doi: 10.3788/IRLA201948.0503001
[16]	周林, 杨甬英, 闫凯, 曹频, 李晨, 吴凡. 玻璃面板油墨厚度无损在线数字化检测系统 . 红外与激光工程, 2017, 46(12): 1217009-1217009(7). doi: 10.3788/IRLA201746.1217009
[17]	丁超, 唐力伟, 曹立军, 邵新杰, 邓士杰. 复杂深孔内轮廓结构光图像畸变矫正算法 . 红外与激光工程, 2017, 46(12): 1217008-1217008(7). doi: 10.3788/IRLA201746.1217008
[18]	王颖, 张瑞. 管道内表面圆结构光视觉三维测量系统 . 红外与激光工程, 2014, 43(3): 891-896.
[19]	潘雪涛, 屠大维, 蔡建文. 光致漂白材料的激光三维信息高密度存储 . 红外与激光工程, 2013, 42(12): 3249-3253.
[20]	王超, 张涯辉, 何培龙. 利用单站光测图像确定回转体目标三维姿态 . 红外与激光工程, 2013, 42(9): 2515-2518.

点击查看大图

计量

文章访问数: 403
HTML全文浏览量: 73
PDF下载量: 100
被引次数: 0

深孔内表面结构光三维重构

doi: 10.3788/IRLA201847.1117004

1. 陆军工程大学(石家庄校区) 火炮工程系,河北石家庄 050003;

2. 陆军工程大学(石家庄校区) 车辆与电气工程系,河北石家庄 050003

作者简介:
丁超(1990-),男,博士生,主要从事机器视觉及数字图像处理方面的研究。Email:duncan1119@163.com

收稿日期: 2018-06-13
修回日期: 2018-07-17
刊出日期: 2018-11-25

基金项目:

国家自然科学基金（51575523）

中图分类号: TN247;TP391

关键词:

深孔 /
结构光 /
三维重构

摘要: 为实现针对深孔内表面几何形状的高精度三维重构，搭建了一套基于结构光的三维检测系统。首先，介绍了该检测系统的构成及相关测量原理，并验证了在某一确定范围内图像距离与实际距离近似呈线性关系，该论断为后续检测奠定了坚实的理论基础；然后，针对深孔模型实物以及对应的内表面展开成平面模型分别进行结构光检测，从而验证了检测方案的可行性以及检测系统的实际效果。结果表明：该检测方案在理论上可行，在实际应用中系统的检测精度能够达到亚像素水平，绝对偏差控制在0.034 7 mm的范围内；最后，在实际应用于深孔类零部件内表面检测的过程中，实现了针对该零部件内表面几何形状的高精度三维重构。

English Abstract

3D reconstruction of deep-hole inner surface using structured light

1. Artillery Engineering Department,Army Engineering University,Shijiazhuang 050003,China;

2. Vehicle and Electrical Engineering Department,Army Engineering University,Shijiazhuang 050003,China

Received Date: 2018-06-13
Rev Recd Date: 2018-07-17
Publish Date: 2018-11-25

Keywords:

Abstract: In order to realize the high precision 3D reconstruction for deep-hole inner surface geometry, a 3D measurement system was built based on the structured light. First, the constitution and relevant measurement principle of the system were introduced, the assertion was proved that the distance between the image and the actual was approximately linear in a given range. The assertion lays a solid theoretical foundation for the following measurement. Then, the deep-hole model object and the model in which the corresponding inner surface was unfolded into a plane which were measured using the structured light. The measurement proves the feasibility of the measurement scheme and the actual effect of the measurement system. The measurement results show that the measurement scheme is feasible in theory, the measurement accuracy of the system can reach sub-pixel in practical applications and the absolute deviation is controlled within 0.034 7 mm range. Finally, in the actual measurement of the inner surface of the deep-hole parts inner surface, the high precision 3D reconstruction for deep-hole inner surface geometry was realized.