刘正君, 耿勇, 谭久彬. 基于柱透镜多旋转测量的计算成像[J]. 红外与激光工程, 2019, 48(6): 603016-0603016(5). DOI: 10.3788/IRLA201948.0603016
引用本文: 刘正君, 耿勇, 谭久彬. 基于柱透镜多旋转测量的计算成像[J]. 红外与激光工程, 2019, 48(6): 603016-0603016(5). DOI: 10.3788/IRLA201948.0603016
Liu Zhengjun, Geng Yong, Tan Jiubin. Computational imaging based on multi-rotations measurement of cylinder lens[J]. Infrared and Laser Engineering, 2019, 48(6): 603016-0603016(5). DOI: 10.3788/IRLA201948.0603016
Citation: Liu Zhengjun, Geng Yong, Tan Jiubin. Computational imaging based on multi-rotations measurement of cylinder lens[J]. Infrared and Laser Engineering, 2019, 48(6): 603016-0603016(5). DOI: 10.3788/IRLA201948.0603016

基于柱透镜多旋转测量的计算成像

Computational imaging based on multi-rotations measurement of cylinder lens

  • 摘要: 提出一种基于单柱透镜旋转调制的光学扫描成像系统,样品的完整波前信息可以通过柱透镜旋转调制的多幅强度图样迭代重建。此外,柱透镜的旋转角度作为该系统的一个关键参数,其值通过基于Radon变换的数值计算方法得到,摆脱了对高精度旋转设备的要求。该成像系统的可行性在仿真和实验结果中均得以验证。与轴向多距离扫描成像系统相比,该成像系统中各光学元件在轴向位置保持固定,数据获取速度得以加快且轴向采样率保持固定,不仅简化了光场重构中的算法设计,而且极大地加快了收敛速度。

     

    Abstract: In this paper, an optical scanning imaging system based on a single cylindrical lens rotation modulation was proposed. The complete wavefront information of the sample could be iteratively reconstructed by intensity patterns of the rotational modulation of the cylindrical lens. In addition, as a key parameter of the system, rotation angles of cylindrical lens were obtained by numerical calculation method based on the Radon transform, which got rid of the requirements for high-precision rotating equipment. Both the simulation and experimental results have verified the feasibility of the method. Compared with the axial multi-distance scanning imaging system, all optical components in the imaging system remain fixed in the axial position, so the data acquisition speed is accelerated and the axial sampling rate is kept fixed. It not only simplifies the algorithm design in the light field reconstruction, but also greatly speeds up the convergence speed.

     

/

返回文章
返回