Volume 42 Issue 1
Feb.  2014
Turn off MathJax
Article Contents

Ma Jiaguang, Tang Tao. Review of compound axis servomechanism tracking control technology[J]. Infrared and Laser Engineering, 2013, 42(1): 218-227.
Citation: Ma Jiaguang, Tang Tao. Review of compound axis servomechanism tracking control technology[J]. Infrared and Laser Engineering, 2013, 42(1): 218-227.

Review of compound axis servomechanism tracking control technology

  • Received Date: 2012-05-22
  • Rev Recd Date: 2012-06-19
  • Publish Date: 2013-01-25
  • Compound axis servomechanism is an engineering realization of the two-channel control system, and is widely used in the optoelectronic tracking control, laser communication and beam control. The tracking precision and control bandwidth are greatly improved by the compound axis servomechanism. In high tracking control system, the compound axis servomechanism is an effective way to obtain the tracking precision of the microradian, even the submicroradian. In this paper, the basic theory and primarily technical problems of the compound axis servomechanism were introduced. In the control system of the compound axis servomechanism, the control bandwidth matching of main and subsystem tracking control was a prerequisite of compound axis servomechanism, and the control performance precision of compound axis servomechanism depended on the closed loop control performance of fast steering mirror. The recent development and technical improvement was analyzed, such as multiple compound axis servomechanism, pseud compound axis servomechanism, adaptive optics, feed forward control and so on in the compound axis servomechanism.
  • [1] Thanmas W. Digital laser ranging and tracking using a compound axis servomechanism[J]. Applied Optics, 1966, 5(4): 497-505.
    [2]
    [3] Krasovsky A A. On two-channel control systems described by equations with complex parameters[J]. Avtomat i Telemekh, 1957, 18(1): 1-10.
    [4]
    [5]
    [6] Neuman D B. The analysis of cross-coupling effects on the stability of two-dimensional, orthogonal, feedback control systems[J]. IRE Transaction on Automatic Control, 1960, 5(4): 314-320.
    [7] Hilkert J M. Inertially stabilized platform technology [J]. IEEE Control Systems Magazine, 2008, 28(1): 26-49.
    [8]
    [9]
    [10] Larry Edward Hawe. Control of a fast steering mirror for laser based satellite communication[D]. Boston: Massachusetts Institute of Technology, 2006.
    [11] Daniel Joseph Kluk. An advanced fast steering mirror for optical communication[D]. Boston: Massachusetts Institute of Technology, 2007.
    [12]
    [13] Alexander J W. Pointing and tracking concepts for deep space missions[C]//SPIE, 1999, 3615: 230-249.
    [14]
    [15]
    [16] Guelman M. Acquisition and pointing controls for inter-satellite laser communications[J]. IEEE Transacations on Aerospace and Electronics Systems, 2004, 40(4): 496-500.
    [17] Fujine M. Current and future actirles in the area of optical communications in Japan[C]//SPIE, 1991, 1522: 14-26.
    [18]
    [19]
    [20] Ma Jiaguang. The basic technologies of the acquisition, tracking and pointing systems[J]. Opto-Electronic Engineering, 1989, 16(3): 1-42. (in Chinese)
    [21] Li Shengliang. Compound axis servo system in opto-electronic precision tracking[J]. Optics and Precision Engineering, 1980, 20(2): 50-56. (in Chinese)
    [22]
    [23] Peng Xujun. The research and experiments of compoundaxis control system in opto-electronic accurate tracking[J]. Opto-Electronic Engineering, 1994, 23(5): 1-4. (in Chinese)
    [24]
    [25]
    [26] Ren Ge, Ma Jiaguang. Experiment system of a fast steering mirror[C]//SPIE, 1994, 2221: 464-474.
    [27]
    [28] Ren Ge. An analysis of kinematic relationship for compound-axis structure [J]. Opto-Electronic Engineering, 1995, 6:41-46. (in Chinese)
    [29] Wang Yi. Dual compound axis servo system of opto-electronic precision tracking[J]. Optics and Precision Engineering, 1996, 26(4): 58-61. (in Chinese)
    [30]
    [31]
    [32] Fu Chengyu. The application research of the composite axis control system[J]. Opto-Electronic Engineering, 1998, 23(4): 1-12. (in Chinese)
    [33]
    [34] Liu Tingxia. The research of compound-axis servo control technique of o-e tracking system [D]. Beijing: University of Chinese Academy of Sciences, 2005. (in Chinese)
    [35]
    [36] Li Wenjun. Study on control strategy of o-e tracking systems with compound axis[D]. Beijing: University of Chinese Academy of Sciences, 2006. (in Chinese)
    [37] Wang Qiang. Single detector compound axis control based on realtime predicted trajectory correcting method [J]. Opto-Electronic Engineering, 2007, 34(4): 17-21.
    [38]
    [39]
    [40] Dong Hao. An equivalent compound control based on a suppositional compound-axis system[J]. Journal of Harbin Engineering University, 2011, 32(3): 309-313. (in Chinese)
    [41]
    [42] Dong Hao. Twice tracking control on opto-electric tracking servo system[J]. Science Technology and Engineering, 2011, 11(16): 3688-3702. (in Chinese)
    [43]
    [44] Wang Yonghui. Research on structure design of fast-steering mirror and its dynamic characteristics[D]. Beijing: University of Chinese Academy of Sciences, 2006.
    [45] Lu Yafei. Design of two-axis elastic support for fast steering mirror [J]. Optics and Precision Engineering, 2010, 18(12):2574-2582. (in Chinese)
    [46]
    [47] Xu Xinxing. Research on mechanical structure of fast-steering mirror driven by voice coil actuators [J]. Journal of Changchun University of Science and Technology, 2011, 34(1): 49-52. (in Chinese)
    [48]
    [49] Hu Haojun. Transfer function identification in a fast steering mirror system [J]. Opto-Electronic Engineering, 2005, 32(7): 1-10. (in Chinese)
    [50]
    [51] Wu Qiongyan. Wide bandwidth control of fast-steering mirror driven by voice coil motor [J]. Opto-Electronic Engineering, 2004, 31(8): 15-18. (in Chinese)
    [52]
    [53] Tang Tao, Huang Yongmei, Fu Chenyu, et al. Acceleration feedback of a CCD-based tracking loop for fast steering mirror [J]. Optical Engineering, 2009, 48(1): 1-6.
    [54]
    [55] Tang Tao. Compensating for some errors related to time delay in a charge-coupled-device- based fast steering mirror control system using a feed forward loop [J]. Optical Engineering, 2010, 49(7): 1-7.
    [56]
    [57] Tang Tao. PID-I controller of CCD- based tracking loop for fast steeling mirror [J]. Optical Engineering, 2011, 50(4): 1-4.
    [58]
    [59] Liu Ming. Research of model and control for fast-steering mirrors [J]. Optical Technique, 2008, 34(2): 227-232. (in Chinese)
    [60]
    [61] Rao Changhui. 61-element adaptive optical system for 1.2 m telescope of Yunnan observatory [J]. Chinese Journal of Quantum Electronics, 2006, 23(3): 295-302. (in Chinese)
    [62]
    [63] Wu Bilin. Performance analysis of tracking loop of high precision for adaptive optical system [J]. Opto-Electronic Engineering, 2006, 33(6): 1-9. (in Chinese)
    [64]
    [65] Song Yansong. Variable structure control technology of the fine tracking assembly in airborne laser communication system [J]. Infrared and Laser Engineering, 2010, 36(5):934-938. (in Chinese)
    [66]
    [67] Hu Zhen. Research on ATP system technology of laser communication terminal in space [J]. Acta Armamentarii, 2011, 32(6): 752-757. (in Chinese)
    [68]
    [69]
    [70] Guo Lidong. Compound-axis macro-micro control and modeling of laser weapon tracking system [J]. Journal of Jilin University, 2011, 43(3): 859-864. (in Chinese)
    [71]
    [72] Nie Guangsu. Study of capability and error restraint ability of optical inter-satellite communications compound axis tracking structure [J]. Journal of Air Force Engineering University, 2011, 12(2): 47-51. (in Chinese)
    [73]
    [74] Ma Jiaguang. Principles and applications of combined control and equivalent combined control [J]. Opto-Electronic Engineering, 1988, 10(5): 1-16.
    [75]
    [76] Huang Yongmei. Simulation for the application of prediction filtering technique in photoelectric theodolite [J]. Opto-Electronic Engineering, 2002, 29(4): 5-9. (in Chinese)
    [77] Huang Yongmei. Application of forecast of moving target velocity in electro-optical tracking control system [J]. Infrared and Laser Engineering, 2004, 33(5): 477-481. (in Chinese)
    [78]
    [79]
    [80] Huang Yongmei. Kalman filter compensation method for delay of tracking sensor in servo system [J]. Opto-Electronic Engineering, 2006, 50(6): 4-9.
    [81] Li X R, Jilkov V P. A survey of maneuvering target tracking: dynamic models [C]//SPIE, 2000, 4048: 212235.
    [82]
    [83]
    [84] Li R, Jilkov V P. A survey of maneuvering target tracking-part II: ballistic target models [C]//SPIE, 2001, 4473: 559-581.
    [85]
    [86] Ding Ke. Composite control of fast-steering-mirror for beam jitter [J]. Optics and Precision Engineering, 2011, 19(9): 1991-1998. (in Chinese)
    [87] Ding Ke. Error adaptive feedforward composite control of fast-steering-mirror [J]. Chinese Journal of Lasers, 2011, 38(7): 1-7. (in Chinese)
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article Metrics

Article views(312) PDF downloads(280) Cited by()

Related
Proportional views

Review of compound axis servomechanism tracking control technology

  • 1. Key Laboratory of Beam Control,Chinese Academy of Sciences,Chengdu 610209,China;
  • 2. Institute of Optics and Electronics,Chinese Academy of Sciences,Chengdu 610209,China

Abstract: Compound axis servomechanism is an engineering realization of the two-channel control system, and is widely used in the optoelectronic tracking control, laser communication and beam control. The tracking precision and control bandwidth are greatly improved by the compound axis servomechanism. In high tracking control system, the compound axis servomechanism is an effective way to obtain the tracking precision of the microradian, even the submicroradian. In this paper, the basic theory and primarily technical problems of the compound axis servomechanism were introduced. In the control system of the compound axis servomechanism, the control bandwidth matching of main and subsystem tracking control was a prerequisite of compound axis servomechanism, and the control performance precision of compound axis servomechanism depended on the closed loop control performance of fast steering mirror. The recent development and technical improvement was analyzed, such as multiple compound axis servomechanism, pseud compound axis servomechanism, adaptive optics, feed forward control and so on in the compound axis servomechanism.

Reference (87)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return