[1] |
Du Y, Zhao K, Zhu Z L, et al. Research and application of ultrafast laser precision manufacturing technology [J]. Laser & Infrared, 2020, 50(12): 1419-1425. (in Chinese) doi: 10.3969/j.issn.1001-5078.2020.12.001 |
[2] |
Yue D M, Sun H L, Yang X, et al. Annular drilling process and quality control neural network model of stainless steel micro-hole with femtosecond laser [J]. Infrared and Laser Engineering, 2021, 50(10): 20200446. (in Chinese) doi: 10.3788/IRLA20200446 |
[3] |
Long J Y, Wu Y C, Gong D W, et al. Femtosecond laser fabricated superhydrophobic copper surfaces and their anti-icing properties [J]. Chinese Journal of Lasers, 2015, 42(7): 0706002. (in Chinese) doi: 10.3788/CJL201542.0706002 |
[4] |
Li G L, Hu S S, Tang H Q, et al. Laser repeat drilling of alumina ceramics in static water [J]. International Journal of Advanced Manufacturing Technology, 2018, 96(5-8): 2885-2891. doi: 10.1007/s00170-018-1749-8 |
[5] |
Liu B, Yan Y J, Zhao J, et al. Research on hole depth in femtosecond laser deep micropore processing technology based on filament effect [J]. Optik, 2022, 249: 168307. doi: 10.1016/j.ijleo.2021.168307 |
[6] |
Bernard O, Audouard E, SchÖps B, et al. Efficient micro processing with high power femtosecond lasers by beam engineering and modelling [J]. Procedia Cirp, 2018, 74: 310-314. doi: 10.1016/j.procir.2018.08.121 |
[7] |
Zheng C L, Shen H. Ablation mechanism in underwater drilling by an ultrafast laser with pulse energy below the water breakdown threshold [J]. Journal of Manufacturing Processes, 2022, 73: 354-363. doi: 10.1016/j.jmapro.2021.11.020 |
[8] |
Liu Y Z. Coaxial waterjet-assisted laser drilling of film cooling holes in turbine blades [J]. International Journal of Machine Tools & Manufacture, 2020, 150: 103510. |
[9] |
Ren N F, Xia K B, Yang H Y, et al. Water-assisted femtosecond laser drilling of alumina ceramics [J]. Ceramics International, 2021, 47(8): 11465-11473. doi: 10.1016/j.ceramint.2020.12.274 |
[10] |
Zhai Z Y, Wang W J, Mei X S, et al. Influence of plasma shock wave on the morphology of laser drilling in different environments [J]. Optics Communications, 2017, 390: 49-56. doi: 10.1016/j.optcom.2016.12.066 |
[11] |
Chen Q, Wang H J, Lin D T, et al. Characterization of hole taper in laser drilling of silicon nitride ceramic under water [J]. Ceramics International, 2018, 44(11): 13449-13452. doi: 10.1016/j.ceramint.2018.04.173 |
[12] |
Feng D C, Shen H. Hole quality control in underwater drilling of yttria-stabilized zirconia using a picosecond laser [J]. Optics and Laser Technology, 2019, 113: 141-149. doi: 10.1016/j.optlastec.2018.12.019 |
[13] |
Wang H X, Xu Y, Liu J, et al. Magnet-assisted laser hole-cutting in magnesium alloys with and without water immersion [J]. Journal of Manufacturing Processes, 2021, 61: 539-560. doi: 10.1016/j.jmapro.2020.11.026 |
[14] |
Wang W J, Song H W, Liao K, et al. Water-assisted femtosecond laser drilling of 4H-SiC to eliminate cracks and surface material shedding [J]. International Journal of Advanced Manufacturing Technology, 2020, 112(1-2): 553-562. |
[15] |
Nguyen T T P, Tanabe R, Ito Y. Comparative study of the expansion dynamics of laser-driven plasma and shock wave in in-air and underwater ablation regimes [J]. Optics and Laser Technology, 2017, 100: 21-26. |
[16] |
Kruusing A. Underwater and water-assisted laser processing: Part 1-general features, steam cleaning and shock processing [J]. Optics and Lasers in Engineering, 2004, 41(2): 307-327. doi: 10.1016/S0143-8166(02)00142-2 |
[17] |
Ren N F, Gao F Q, Wang H X, et al. Water-induced effect on femtosecond laser layered ring trepanning in silicon carbide ceramic sheets using low-to-high pulse repetition rate [J]. Optics Communications, 2021, 496: 127040. doi: 10.1016/j.optcom.2021.127040 |
[18] |
Varlamova O, Costache F, Ratzke M, et al. Control parameters in pattern formation upon femtosecond laser ablation [J]. Applied Surface Science, 2007, 253(19): 7932-7936. doi: 10.1016/j.apsusc.2007.02.067 |
[19] |
Wang Y F, Zhang Z, Zhang G Y, et al. Study on immersion waterjet assisted laser micromachining process [J]. Journal of Materials Processing Technology, 2018, 262: 290-298. doi: 10.1016/j.jmatprotec.2018.07.004 |
[20] |
Long J Y, Eliceiri M H, Wang L T, et al. Capturing the final stage of the collapse of cavitation bubbles generated during nanosecond laser ablation of submerged targets [J]. Optics and Laser Technology, 2020, 134: 106647. |
[21] |
Zhang D S, Ranjan B, Tanaka T, et al. Underwater persistent bubble-assisted femtosecond laser ablation for hierarchical micro/nanostructuring [J]. International Journal of Extreme Manufacturing, 2020, 2(1): 015001. doi: 10.1088/2631-7990/ab729f |
[22] |
Stan C A, Milathianaki D, Laksmono H, et al. Liquid explosions induced by X-ray laser pulses [J]. Nature Physics, 2016, 12(10): 966-971. doi: 10.1038/nphys3779 |
[23] |
Požar T, Agrež V, Petkovšek R. Laser-induced cavitation bubbles and shock waves in water near a concave surface [J]. Ultrasonics Sonochemistry, 2021, 73: 105456. doi: 10.1016/j.ultsonch.2020.105456 |