[1] Maurizio Motta, Ali Gökhan-demir, Barbara Previtali. High-speed imaging and process characterization of coaxial laser metal wire deposition [J]. Additive Manufacturing, 2018, 22: 497−507. doi:  10.1016/j.addma.2018.05.043
[2] 王聪, 石世宏, 方琴琴, 等. 空间多元密排扭曲薄壁件的激光熔覆成形研究[J]. 中国激光, 2017, 44(6): 102−111.

Wang Cong, Shi Shihong, Fang Qinqin, et al. Research on laser cladding forming of close-packed multivariant twisty thin-wall parts [J]. Chinese Journal of Lasers, 2017, 44(6): 102−111. (in Chinese)
[3] 沈婷, 石拓, 傅戈雁, 等. 变壁厚偏心圆环结构激光熔覆成型及闭环控制[J]. 中国激光, 2018, 45(3): 222−229.

Shen Ting, Shi Tuo, Fu Geyan, et al. Laser cladding forming and closed-loop control of thickness-variable eccentric ring structure [J]. Chinese Journal of Lasers, 2018, 45(3): 222−229. (in Chinese)
[4] 张锐, 石拓, 石世宏, 等. 不等高结构件激光近净成形闭环控制[J]. 中国激光, 2018, 45(3): 209−215.

Zhang Rui, Shi Tuo, Shi Shihong, et al. Closed-loop control of laser engineered net Shaping of unequal-height parts [J]. Chinese Journal of Lasers, 2018, 45(3): 209−215. (in Chinese)
[5] Baumers M, Dickens P, Tuck C, et al. The cost of additive manufacturing: machine productivity, economies of scale and technology-push [J]. Technological Forecasting and Social Change, 2016, 102: 193−201. doi:  10.1016/j.techfore.2015.02.015
[6] Bekker A C M, Verlinden J C. Life cycle assessment of wire + arc additive manufacturingcompared to green sand casting and CNC milling in stainless steel [J]. Clean Prod, 2018, 177: 438−447. doi:  10.1016/j.jclepro.2017.12.148
[7] 史建军, 石拓, 石世宏, 等. 激光光内送粉仰面熔覆工艺研究及优化[J]. 红外与激光工程, 2019, 48(3): 0306005. doi:  10.3788/IRLA201948.0306005

Shi Jianjun, Shi Tuo, Shi Shihong, et al. Process study and optimization of upward cladding by laser inside powder feeding [J]. Infrared and Laser Engineering, 2019, 48(3): 0306005. (in Chinese) doi:  10.3788/IRLA201948.0306005
[8] Waheed Ui Haq Syed. Effect of wire feeding direction and location in multiple layer diode laser direct metal deposition [J]. Applied Surface Science, 2015, 248: 518−520.
[9] 朱进前, 凌泽民, 杜发瑞, 等. 激光熔丝增材制造温度场的红外热像监测[J]. 红外与激光工程, 2018, 47(6): 0604002.

Zhu Jinqian, Ling Zemin, Du Farui, et al. Monitoring of laser metal-wire additive manufacturing temperature field using infrared thermography [J]. Infrared and Laser Engineering, 2018, 47(6): 0604002. (in Chinese)
[10] 石世宏, 傅戈雁, 李龙, 等. 中空激光光内同轴送丝熔覆工艺的实现及其试验研究[J]. 中国激光, 2010, 37(1): 01026605.

Shi Shihong, Fu Geyan, Li Long, et al. Realization and research of laser cladding with method of internal wire feeding through a hollow laser beam [J]. Chinese Journal of Lasers, 2010, 37(1): 01026605. (in Chinese)
[11] 傅戈雁, 石世宏, 韩学磊. 环形激光光内同轴送丝焊接试验研究[J]. 中国激光, 2010, 37(8): 08208006.

Fu Geyan, Shi Shihong, Han Xuelei. Test research of laser welding based on coaxial wire feeding through an annular laser beam [J]. Chinese Journal of Lasers, 2010, 37(8): 08208006. (in Chinese)
[12] J Paulo Davim, Carlos Oliveira, Cardoso A. Predicting the geometric form of clad in laser cladding by powder using multiple regression analysis (MRA) [J]. Materials and Design, 2008, 29(2): 554−557. doi:  10.1016/j.matdes.2007.01.023
[13] Shi Jianjun, Zhu Ping, Fu Geyan, et al. Geometry characteristics modeling and process optimization in coaxial laser inside wire cladding [J]. Optics and Laser Technology, 2018, 101: 341−348. doi:  10.1016/j.optlastec.2017.10.035
[14] 姜淑娟, 刘伟军, 南亮亮. 基于神经网络的激光熔覆高度预测[J]. 机械工程学报, 2009,3:269.

Jiang Shujuan, Liu Weijun, Nan Liangliang. Laser cladding height prediction based on neural network[J]. Journal of Mechinical Engineering, 2009,3:269.(in Chinese)
[15] Yi X, Tan C H, Siew C K. A new block cipher based on chaotictent maps [J]. IEEE Transcations on Circuits and System, 2002, 49(12): 1826−1829. doi:  10.1109/TCSI.2002.805714
[16] 傅戈雁. 一种用于激光熔覆的激光光内送丝装置: CN 105562951[P]. 2016-02-03
[17] 傅戈雁. 激光熔覆装置: CN 107627002[P].2017-09-20
[18] 周志华. 机器学习[M]. 北京: 清华大学出版社, 2016.

Zhou Zhihua. Machine Learning[M]. Beijing: Tsinghua University Press, 2016.(in Chinese)
[19] 朱萍. 同轴送丝激光熔覆工艺研究及薄壁墙成形堆积[D]. 苏州: 苏州大学, 2013.

Zhu Ping. Study on inside-laser coaxial wire feeding process of laser cladding and single beads prototyping[D]. Suzhou: Soochow University, 2013.(in Chinese)