[1] Tang Qingju, Wang Yang, Liu Junyan, et al. Detecting of defects in heat-resistant alloy coating structure plates using pulsed infrared thermography[J]． Infrared and Laser Engineering, 2013, 42(7): 1685-1690． (in Chinese) 唐庆菊, 王扬, 刘俊岩, 等． 耐热合金涂层结构板材内部缺陷的脉冲红外热成像检测[J]． 红外与激光工程, 2013, 42(7): 1685-1690．
[2]
[3]
[4] Zeng Zhi, Tao Ning, Feng Lichun, et al． Effect of defect size on the measurement of defect depth using thermal wave imaging[J]． Infrared and Laser Engineering, 2012, 41(7): 1910-1915． (in Chinese) 曾智, 陶宁, 冯立春, 等. 缺陷尺寸对红外热波技术缺陷深度测量的影响研究[J]． 红外与激光工程, 2012, 41(7): 1910-1915．
[5]
[6] Yang Zhengwei, Zhang Wei, Wang Yan, et al． Application of homomorphic technology in image correction processing for infrared thermal wave inspection[J]． Infrared and Laser Engineering, 2011, 40(1): 22-27． (in Chinese) 杨正伟, 张炜, 王焰, 等． 同态增晰技术在红外热波探伤图像校正中的应用[J]． 红外与激光工程, 2011, 40(1): 22-27．
[7] Huang C H, Ozisik M N. Inverse problem of determining the unknown strength of an internal plane heat source[J]．Journal of Franklin Institute, 1992, 329 (4): 751-764．
[8]
[9] Silva Neto A J, Ozisik M N. Two-dimensional inverse heat conduction problem of estimating the time-varying strength of a line heat source[J]． J Appl Phys, 1992, 71(11): 5357-5362．
[10]
[11] Niliot C L, Lefevre F. A method for multiple steady line heat sources identification in a diffusive system: application to an experimental 2D problem[J]． International Journal of Heat and Mass Transfer, 2001, 44: 1425-1438．
[12]
[13]
[14] Fan Chunli, Sun Fengrui, Yang Li． Thermographic identification algorithm of two-dimensional irregular-shaped self-heating subsurface defects[J]. Chinese Journal of Computational Physics, 2009, 26(6): 897-902． (in Chinese) 范春利, 孙丰瑞, 杨立. 二维不规则形状发热型缺陷的红外识别算法[J]． 计算物理, 2009, 26(6): 897-902．
[15]
[16] Huang Huilan, Yu Xichen. Finite element analysis of the point heat source heating a sheet metal[J]． Journal of Guang Xi University, 2002, 27(2): 114-116． (in Chinese) 黄慧兰, 喻锡臣. 薄板点热源加热的有限元分析[J]． 广西大学学报, 2002, 27(2): 114-116．
[17]
[18] Cao Mingyu, Fan Chunli, Sun Fengrui. Geometry identification of fixed-depth internal heat sources in three-dimensional test-piece based on surface temperature measurement[J]． Infrared, 2012, 33(10): 33-38． (in Chinese) 曹明宇, 范春利, 孙丰瑞. 三维试件固定深度内热源几何分布识别研究[J]． 红外, 2012, 33(10): 33-38．
[19] Liu Bin, Tong Mingwei, Xu Yongsong． Inner heat source and heat transfer in wine fermentation[J]． Journal of Chemical Industry and Engineering, 2007, 58(11): 2733-2737． (in Chinese) 刘彬, 童明伟, 徐永松. 葡萄酒胶发酵中的内热源和传热特性[J]． 化工学报, 2007, 58(11): 2733-2737．
[20]
[21] Cao Mingyu． The research of internal defects Identification based on infrared temperature measurement[D]． Wuhan: Naval University of Engineering, 2012． (in Chinese) 曹明宇. 基于红外测温技术的内部缺陷形状识别的算法研究[D]． 武汉: 海军工程大学, 2012．