[1]
[2] Wu B, Li M Q, Ma D W. The flow behavior and constitutive equations in isothermal compression of 7050 aluminum alloy [J]. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2012, 542: 79-87.
[3] PalDey S, Deevi S C, Alford T L. Cathodic arc deposited thin film coatings based on TiAl intermetallics[J]. Intermetallics, 2004, 12(7-9): 985-991.
[4]
[5]
[6] Zhu Gangxian, Lin Dichen, Zhang Anfeng. The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal deposition[J]. Optics Laser Technology, 2012, 44(2): 349-356
[7]
[8] Chen Gang, Li Xiangfeng, Zuo Dunwen. Solidification analysis during laser cladding process based on finite elements[J]. China Mechanical Engineering, 2012, 23(4): 468-473. (in Chinese) 陈刚, 黎向锋, 左敦稳, 等. 基于有限元的激光熔覆凝固过程分析[J]. 中国机械工 程, 2012, 23(4): 468-473.
[9] Tseng W C, Aoh J N. Simulation study on laser cladding on preplaced powder layer with a tailored laser heat source[J]. Optics Laser Technology, 2013, 48: 141-152.
[10]
[11] Zhang Xue. Studying for ultrasonic casting microstructure and thermal cracking sensitivity of 7050 aluminum alloy round ingot[D]. Changsha: Central South University, 2010. (in Chinese) 张雪. 7050铝合金圆锭超声铸造微观组织及热裂敏感性研究[D]. 长沙: 中南大学, 2010.
[12]
[13] Tian Rongzhang, Wang Zhutang. Alloy and Processing Manual [M]. Changsha: Central South University Press, 2000. (in Chinese) 田荣璋, 王祝堂. 合金及其加工手册[M]. 长沙: 中南大学出版社, 2000.
[14]
[15] Zhao G P, Kim J D. Application of 3-D finite element method using Lagrangian formulation to dilution control in laser cladding process[J]. International Journal of Mechanical Sciences, 2003, 45(5): 777-796.
[16]
[17]
[18] Michael Bass. Laser Material Processing [M]. North-holland Publishing Company, 1983: 239-245.
[19] Zheng Lijuan, Li Yan, He Dachuan, et al. Analysis on temperature field of multi-path laser claded and microstructure of coatings layer[J]. Infrared and Laser Engineering, 2013, 42(S01): 52-57. (in Chinese) 郑丽娟, 李燕, 何大川, 等. 激光多道熔覆温度场及熔覆层组织分析[J]. 红外与激 光工程, 2013, 42(S01): 52-57.