[1] 张颖, 丁振敏, 赵慧洁, 等. 光机热集成分析中镜面刚体位移分离[J]. 红外与激光工程, 2012, 41(10): 2763-2767. doi:  10.3969/j.issn.1007-2276.2012.10.039

Zhang Ying, Ding Zhenmin, Zhao Huijie, et al. Rigid-body displacement separation of optics in optical-structural thermal integrated analysis [J]. Infrared and Laser Engineering, 2012, 41(10): 2763-2767. (in Chinese) doi:  10.3969/j.issn.1007-2276.2012.10.039
[2] Banyal R K, Ravindra B, Chatterjee S. Opto-thermal analysis of a lightweighted mirror for solar telescope [J]. Optics Express, 2013, 21(6): 7065-7081. doi:  10.1364/OE.21.007065
[3] Chen Y, Huang B, You Z, et al. Optimization of lightweight structure and supporting bipod flexure for a space mirror [J]. Applied Optics, 2016, 55(36): 10382-10391. doi:  10.1364/AO.55.010382
[4] Haber A, Draganov J E, Heesh K, et al. Modeling, experimental validation, and model order reduction of mirror thermal dynamics [J]. Optics Express, 2021, 29(15): 24508-24524. doi:  10.1364/OE.433172
[5] Xue Z, Wang C, Yu Y, et al. Integrated optomechanical analyses and experimental verification for a thermal system of an aerial camera [J]. Applied Optics, 2019, 58(26): 6996-7005. doi:  10.1364/AO.58.006996
[6] Zhou X, Liu H, Li Y, et al. Analysis of the influence of vibrations on the imaging quality of an integrated TDICCD aerial camera [J]. Optics Express, 2021, 29(12): 18108-18121. doi:  10.1364/OE.430031
[7] Gu N, Li C, Cheng Y, et al. Thermal control for light-weighted primary mirrors of large ground-based solar telescopes [J]. Journal of Astronomical Telescopes, Instruments, and Systems, 2019, 5(1): 014005.
[8] 柴家贺, 董明利, 孙鹏, 等. 工业相机自热引起像点漂移模型与补偿方法[J]. 红外与激光工程, 2021, 50(6): 240-250.

Chai Jiahe, Dong Mingli, Sun Peng, et al. Model and compensation method of image point drift caused by self-heating of industrial camera [J]. Infrared and Laser Engineering, 2021, 50(6): 20200494. (in Chinese)
[9] Perchermeier J, Wittrock U. Precise measurements of the thermo-optical aberrations of an Yb:YAG thin-disk laser [J]. Optics Letters, 2013, 38(14): 2422-2424. doi:  10.1364/OL.38.002422
[10] 邵军, 孙胜利, 王成良, 等. 球面反射镜镜面热变形的数值分析[J]. 光学技术, 2006, 32(S1): 67-69+72.

Shao Jun, Sun Shengli, Wang Chengliang, et al. Numerical analysis for surface deformation of a spherical reflector in thermal environment [J]. Optical Technique, 2006, 32(S1): 67-69, 72. (in Chinese)
[11] 李云, 邢延文. 采用非均匀有理B样条曲面延展光学元件面形误差[J]. 光学学报, 2012, 32(7): 212-218.

Li Yun, Xing Tingwen. Surface error of optical components extended with non-uniform rational B-spline surface [J]. Acta Optica Sinica, 2012, 32(7): 0722001. (in Chinese)
[12] 吴卫, 白瑜, 陈驰. 光机热集成方法的红外系统应用[J]. 红外与激光工程, 2019, 48(6): 414-419.

Wu Wei, Bai Yu, Chen Chi. Application of optical, mechanical and thermal integration in infrared system [J]. Infrared and Laser Engineering, 2019, 48(6): 0618002. (in Chinese)
[13] Doyle K B, Genberg V L, Michels G J. Integrated Optomechanical Analysis [M]. 2nd ed. Washington: SPIE Press, 2012.
[14] Hu P, Zhu H, He C. Optimization design of water-cooled mirror for low thermal deformation [J]. Applied Thermal Engineering, 2014, 73(1): 598-607. doi:  10.1016/j.applthermaleng.2014.07.052
[15] Koppen S, Van Der Kolk D, Van Kempen F C M, et al. Topology optimization of multicomponent optomechanical systems for improved optical performance [J]. Structural and Multidisciplinary Optimization, 2018, 58: 885-901. doi:  10.1007/s00158-018-1932-4
[16] Lin J, Zhou Y, Wang H, et al. Impact of microvibration on the optical performance of an airborne camera [J]. Applied Optics, 2021, 60(5): 1283-1293. doi:  10.1364/AO.411299
[17] Sandwell D T. Biharmonic spline interpolation of GEOS-3 and SEASAT altimeter Data [J]. Geophysical Research Letters, 1987, 14(2): 139-142. doi:  10.1029/GL014i002p00139
[18] Pan F, Zhu P, Zhang Y. Metamodel-based lightweight design of B-pillar with TWB structure via support vector regression [J]. Computers and Structures, 2010, 88(1-2): 36-44. doi:  10.1016/j.compstruc.2009.07.008