[1] Zhang Jingxu. Development of vertical axial system for large tracking and pointing mount[J]. Opt Precision Eng, 1996, 4(2): 73-77. (in Chinese) 张景旭. 大型跟瞄架方位轴系的研制[J]. 光学 精密工程, 1996, 4(2): 73-77.
[2] Zhou Chao, Yang Hongbo, Wu Xiaoxia, et al. Structure analysis of ground-based large telescopes[J]. Opt Precision Eng, 2011, 19(1): 138-145. (in Chinese) 周超, 杨洪波, 吴晓霞, 等. 地基大口径望远镜结构的性能分析[J]. 光学 精密工程, 2011, 19(1): 138-145.
[3] Li Hui, Shen Xiangheng. New shafting error simulating method of photoelectric theodolite[J]. Infrared and Laser Engineering, 2008, 37(2): 334-337. (in Chinese) 李慧, 沈湘衡. 光电经纬仪轴系误差方正计算的新方法[J].红外与激光工程, 2008, 37(2): 334-337.
[4] Xu Zhaodong, Chen Songcan, Li Xin. Analysis and improvement of dynamic accuracy in stabilizing platform system[J]. Infrared and Laser Engineering, 2006, 35(S1): 454-458. (in Chinese) 许照东, 陈松灿, 李辛. 稳定平台动态精度分析及改进[J]. 红外与激光工程, 2006, 35(S1): 454-458.
[5] Wang Tao, Zhu Mingchao, Yan Shengli, et al. Analysis of LOS pointing error derived from precision of shafting in stabilition mechnasm[J]. Infrared and Laser Engineering, 2011, 40(11): 2266-2269. (in Chinese) 王涛, 朱明超, 誾胜利, 等. 稳定平台轴系精度对十周指向误差的影响分析[J]. 红外与激光工程, 2011, 40(11): 2266-2269.
[6] Blanco D, Alegria M, Callahan S, et al. The New MMT[C]//SPIE, 2004, 5489: 300-311.
[7] Marvin F Campbell, Edward O Reese. SOAR 4.2 meter telescope: evolution of drive and pointing performance from early predictions to final testing[C]//SPIE, 2003, 4837: 308-316.
[8] David S P, Thomas A S, Byron S, et al. The concept design of the discovery channel telescope mount[C]//SPIE, 2004, 5489: 950-961.
[9] Feng Dongyan, Gao Yunguo, Zhang Wenbao. Elimination of shafting errors in photoelectrical theodolites with standard-bearings[J]. Opt Precision Eng, 2011, 19(3): 605-611. (in Chinese) 冯栋彦, 高云国, 张文豹. 采用标准轴承的光电经纬仪轴系误差修正[J]. 光学精密工程, 2011, 19(3): 605-611.
[10] David S Porter, Kerstan G Hermann, James J Schuldenberg. Final design, fabrication, factory integration, and test of a 4.2-meter telescope mount[C]//SPIE, 2003, 4837: 295-307.
[11] Wang Zhi, Zhang Jingxu, Zhao Yongzhi, et al. Radial self-aligning double row different ball diameter slewing bearing for large precision turntable: China, ZL 200910067381.4[P]. 2011-07-20. (in Chinese) 王志, 张景旭, 赵勇志, 等. 大型精密转台用径向自定位双排异径球转盘轴承: 中国,ZL 2009 1 0067381.4[P]. 2011-07-20.
[12] Deng Si'er, Jia Qunyi. Rolling bearing design principle[M].Beijing: Chinese Criterion Publication, 2008. (in Chinese) 邓四二, 贾群义. 滚动轴承设计原理[M]. 北京: 中国标准出版社, 2008.
[13] Harris T A. Rolling Bearing AnMysis[M]. 4th ed. Newyork: John Wiley, 2001.