[1]
[2] Liu Zhijian, Qu Xuanhui, Huang Boyun. Advanees in produeing TIAI alloy withP/M proeessing[J]. Materials Review, 1995, 2: 3-28. (in Chinese)
[3] Kore S D, Date P P, Kulkarni S V. Effect of process parameters on electromagnetic impact welding of aluminum sheets[J]. International Journal of Impact Engineering, 2007, 34(8): 1327-1341.
[4]
[5] Gatzen M, Tang Z, Vollertsen F. Effect of electromagnetic stirring on the element distribution in laser beam welding of aluminium with filler wire [J]. Physics Procedia, 2011, 12: 56-65.
[6]
[7] Bai Fudong, Sha Minghong, Li Tingju, et al. Influence of rotating magnetic field on the microstructure and phase content of Ni-Al alloy[J]. Journal of Alloys and Compounds, 2011, 509(14): 4835-4838. (in Chinese)
[8]
[9]
[10] Barman N, Kumar P, Dutta P. Studies on transport phenomena during solidification of an aluminum alloy in the presence of linear electromagnetic stirring[J]. Journal of Materials Processing Technology, 2009, 209(18-19): 5912-5923.
[11] Luo Jian, Ma Jie, Wang Xiangjie, et al. Microstructure and property of Ni60CuMoW composite coating treated prepared with magnetic field and laser cladding process[J]. Rare Metal Materials and Engineering, 2009, 38(3): 215-219. (in Chinese)
[12]
[13]
[14] Xu Jialu. Development and application of magnetic controlled submerged arc surfacing welding equipment with alternating double pulses[D]. Shenyang: Shenyang University of Technology, 2013: 1-61. (in Chinese)
[15]
[16] Yu Benhai, Hu Xuehui, Wu Yu'e, et al. Studies of the effects and mechanism of electromagnetic stirring on the microstructures and hardness of laser cladding WC-Co based alloy coating[J]. Chinese Journal of Lasers, 2010, 37(10): 2672-2677. (in Chinese)
[17] Liu Hongxi, Ji Shengwei, Jiang Yehua, et al. microstructure and property of Fe60 composite coatings by rotating magnetic field auxiliary laser cladding[J]. Chinese Journal of Lasers, 2013, 40(1): 1-6. (in Chinese)
[18]
[19] Chen Xingrun, Zhang Zhifeng, Xu Jun, et al. numerical simulation of electromagnetic field, flow field and temperature field in semi-solid slurry preparation by electromagnetic stirring[J]. The Chinese Journal of Nonferrous Metals, 2010, 20(5): 932-945. (in Chinese)
[20]
[21] Zhang Qi, Jin Junze, Wang Tongmin, et al. analysis of molten metal flow in rotating magnetic field[J]. The Chinese Journal of Nonferrous Metals, 2007, 17(1): 98-104. (in Chinese)
[22]
[23]
[24] Zhou Wuzhuang. Titanium Handbook[M]. Beijing: Chemical Industry Press, 2012: 1-78. (in Chinese)
[25]
[26] Li Wenbin. Magnetism Stress Engineering[M]. Beijing:Weapons Industry Press, 1991. (in Chinese)
[27] Karl-Heinz Spitzer, Mathias Dubke, Klaus Schwerdtfeger, et al. Rotational electromagnetic stirring in continuous casting of round strands[J]. Metall Trans B, 1986 (17B): 119-131.
[28]
[29]
[30] Hu Renxi. Anays 13.0 electromagnetic finite element analysis from entry to the master [M]. Beijing: China Machine Press, 2011, 12: 1-419. (in Chinese)
[31]
[32] Trindade L B, Vilela, Antonio C F, et al. Numerical model ofelectromagnetic stirring for continuous casting billets[J]. IEEE Transactions on Magnetics, 2002, 38(6): 3658-3660.
[33] Wang Baofeng, Li Jianchao. Application of electromagnetic strirring technology in continuous casting[J]. Angang Technology, 2009, 1: 1-5. (in Chinese)
[34]
[35] Taylor R S, Leopold K E, Tan K O. Continuous Bv X excimer fluorescence using direct current discharge excitation [J]. A P L, 1991, 59(5): 525-527.