[1] |
Zhang Zhengyou. A flexible new technique for camera calibration[J]. IEEE Transactions Pattern Analysis and Machine Intelligence, 2000, 22(11): 1330-1334. |
[2] |
|
[3] |
Li Yuan, Yan Bei. Method of matching calibration points on 2D drone[J]. Computer Engineering and Applications, 2008, 44(13): 242-244. |
[4] |
|
[5] |
Liu Song, Ye Yutang, Sun Qiang, et al. Research of chessboard's corner detection based on homography[J]. Electronic Design Engineering, 2012, 20(6): 114-117. (in Chinese) 刘嵩, 叶玉堂, 孙强, 等. 基于单应性矩阵的棋盘格角点检测研究 [J]. 电子设计工程, 2012, 20(6): 114-117. |
[6] |
|
[7] |
|
[8] |
Kou X, Wang Z, Chen M Z, et al. Fully automatic algorithm for region of interest location in camera calibration [J]. Optical Engineering, 2002, 41(6): 1220-1226. |
[9] |
|
[10] |
Guo Chao, Ma Lin. Research of size measurement based on machine vision [J]. Mechanical Engineering Automation, 2012, (1): 15-17. (in Chinese) 郭超, 马麟. 基于机器视觉的尺寸测量方法研究 [J]. 机械工程与自动化, 2012, (1): 15-17. |
[11] |
Gao Junchai, Lei Zhiyong, Wang Zemin. Camera calibration for high-precision measurement [J]. Electronics Optics Control, 2011, 18(2): 93-96. (in Chinese) 高俊钗, 雷志勇, 王泽民. 高精度测量的相机标定[J]. 电光与控制, 2011, 18(2): 93-96. |
[12] |
|
[13] |
|
[14] |
Niu Haitao, Zhao Xunjie. New method of camera calibration based on checker borad [J]. Infrared and Laser Engineering, 2011, 40(1): 133-137. (in Chinese) 牛海涛, 赵勋杰. 采用棋盘格模板的摄像机标定新方法 [J]. 红外与激光工程, 2011, 40(1): 133-137. |
[15] |
|
[16] |
Xu Peng, Wang Jianye, Wang Yanru. Calculation exact center coordinate of a target circle in camera calibration [J]. Infrared and Laser Engineering, 2011, 40(7): 1342-1346. (in Chinese) 徐鹏, 汪建业, 王燕儒. 摄像机标定中靶标圆心像点坐标的精确计算[J]. 红外与激光工程, 2011, 40(7): 1342-1346. |
[17] |
Wang Dan, Zhao Bin. Laser oblique illumination method for measuring steel plate thickness[J]. Infrared and Laser Engineering, 2011, 40(10): 2033-2036. (in Chinese) 王丹, 赵斌. 激光倾斜照明法测量钢板厚度 [J]. 红外与激光工程, 2011, 40(10): 2033-2036. |