[1]
[2] Qin Lanyun, Wang Ting, Yang Guang, et al. Experimental study on laser deposition repair BT20 alloy component[J]. Infrared and Laser Engineering, 2014, 43(2):404-410.(in Chinese) 钦兰云,王婷,杨光,等.激光沉积修复BT20合金实验研究[J]. 红外与激光工程, 2014, 43(2):404-410.
[3] Yang Guang, Wang Xiangming, Wang Wei, et al. Microstructure and property of laser cladding TiC reinforced composition coating[J]. Infrared and Laser Engineering, 2014, 43(3):796-799.(in Chinese) 杨光,王向明,王维,等.激光熔覆制备TiC颗粒增强涂层的组织和性能[J]. 红外与激光工程, 2014, 43(3):796-799.
[4]
[5] Parisa Farahmand, Radovan Kovacevic. An experimental- numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser[J]. Optics Laser Technology, 2014, 63, 154-168.
[6]
[7] Lin Xin, Cao Yongqing, Wu Xiaoyu, et al. Microstructure and mechanical properties of laser forming repaired 17-4PH stainless steel[J]. Materials and Engineering A, 2012, A553:80-88.
[8]
[9]
[10] Luo Fan, Yao Jianhua, Hu Xiaxia, et al. Effect of laser power on the cladding temperature field and the heat affected zone[J]. Journal of Iron and Steel Research, International, 2011, 18(1):73-78.
[11] Labudovic M, Hu D, Kovacevic R. A three dimension model for direct laser metal powder deposition and rapid prototyping[J]. Journal of Materials Science, 2003, 38(1):35-49.
[12]
[13]
[14] Lai Youbin, Liu Weijun, Kong Yuan, et al. Influencing factors of residual stress of Ti-6. 5Al-1Mo-1V-2Zr alloy by laser rapid forming process[J]. Rare Materials and Engineering, 2013, 42(2):1526-1530.(in Chinese) 来佑彬,刘伟军,孔源,等.激光快速成形TA15残余应力影响因素的研究[J]. 稀有金属与材料工程, 2013, 42(2):1526-1530.
[15]
[16] Kong Yuan, Liu Weijun, Wang Yuechao, et al. Numerical simulation of temperature field and stress field of direct laser metal deposition shaping process of titanium alloys[J]. Journal of Mechanical Engineering, 2011, 47(24):74-82.(in Chinese) 孔源,刘伟军,王越超,等.钛合金激光直接成形过程中热力耦合场的数值模拟[J]. 机械工程学报, 2011, 47(24):74-82.
[17]
[18] Zhang Shuangyin, Lin Xin, Chen Jing, et al. Influence of heat treatment on residual stress of Ti-6Al-4V alloy by laser solid forming[J]. Rare Materials and Engineering, 2009, 38(5):774-778.(in Chinese) 张霜银,林鑫,陈静,等.热处理对激光立体成形TC4残余应力的影响[J]. 稀有金属与材料工程, 2009, 38(5):774-778.
[19] Bian Hongyou, Yang Guang, Li Ying, et al. Grouping parallel scan path generating method of metal laser deposition shaping[J]. Journal of Mechanical Engineering, 2013, 49(11):171-176.(in Chinese) 卞宏友,杨光,李英,等.金属激光成形分组平行扫描路径生成方法[J]. 机械工程学报, 2013, 49(11):171-176.