[1] Han Li, Jiang Wei, Qi Jiarui, et al. Study on the laser surface strengthen orocess of 40Cr steel[J]. Surface Technology, 2009, 38(1): 35-35. (in Chinese) 韩莉, 姜伟, 戚佳睿, 等。40Cr激光表面强化工艺的研究 [J]. 表面技术, 2009, 38(1): 35-35.
[2] Li Yuefeng, Pan Xudong, Wang Guanglin. Low cycle fatigue and ratcheting properties of steel 40Cr under stress controlled tests[J]. International Journal of Fatigue, 2013, 55(10): 74-80.
[3] Wu Anqi, Liu Qibin, Qin Shuijie. Influence of yttrium on laser surface alloying organization of 40Cr steel[J]. Journal of Rare Earths, 2011, 29(10): 1004-1008.
[4] Yan Pei, Deng Jianxin, Wu Ze, et al. Friction and wear behavior of the PVD(Zr,Ti)N coated cemented carbide against 40Cr hardened steel[J]. International Journal of Refractory Metals and Hard Materials, 2012, 35(11): 213-220.
[5] Yasavol N, Abdollah-zadeh A, Ganjali M, et al. Microstructure and mechanical behavior of pulsed laser surface melted AISI D2 cold work tool steel[J]. Applied Surface Science, 2013, 265(1): 653-662.
[6] Steffen Nowotny, Lutz-Michael Berger, Jrg Spatzier. Coatings by laser cladding[J]. Comprehensive Hard Materials, 2014, 1: 507-525.
[7] Zhou Shengfeng, Dai Xiaoqin, Zheng Haizhong. Microstructure and wear resistance of Fe-based WC coating by multi-track overlapping laser induction hybrid rapid cladding [J]. Optics Laser Technology, 2012, 44(1): 190-197.
[8] Zhang Xiaowei, Liu Hongxi, Jiang Yehua, et al. Laser in-situ synthesized TiN/Ti3Al composite coatings[J]. Acta Metallurgica Sinica, 2011, 47(8): 1086-1093. (in Chinese) 张晓伟, 刘洪喜, 蒋业华, 等。激光原位合成TiN/Ti3Al基复合涂层[J]. 金属学报, 2011, 47(8): 1086-1093.
[9] Song Jie, Zhang Qingmao, Lin Xiaocong, et al. Wear performance of Fe-based alloy coating on the 40Cr steel treated by laser cladding[J]. High Power Laser and Particle, 2008, 20 (1): 21-25. (in Chinese) 宋杰, 张庆茂, 林晓聪, 等。40Cr钢表面激光熔覆层的磨损性能 [J]. 强激光与粒子束, 2008, 20 (1): 21-25.
[10] Liu Hongxi, Xu Qian, Wang Chuanqi, et al. Corrosion and wear behavior of Ni60CuMoW coatings fabricated by combination of laser cladding and mechanical vibration processing[J]. Journal of Alloys and Compounds, 2015, 621(2): 357-363.