[1] Tunna L, O'Neill W, Khan A, et al. Analysis of laser micro drilled holes through aluminium for micro-manufacturing applications[J]. Optics and Lasers in Engineering, 2005, 43(9):937-950.
[2]
[3] Burdet N, Brindi F, Carzino R, et al. Very large spot size effect in nanosecond laser drilling efficiency of silicon[J]. Optics Express, 2010, 18(22):22488-22494.
[4]
[5] Bulgakova N M, Evtushenko A B, Shukhov Y G, et al. Role of laser-induced plasma in ultradeep drilling of materials by nanosecond laser pulses[J]. Applied Surface Science, 2011, 257(24):10876-10882.
[6]
[7]
[8] Dan L, Duan-Ming Z. Vaporization and plasma shielding during high power nanosecond laser ablation of silicon[J]. Chinese Physics Letters, 2005, 25(4):1368-1371.
[9]
[10] Tan B. Deep micro hole drilling in a silicon substrate using multi-bursts of nanosecond UV laser pulses[J]. Journal of Micromechanics and Microengineering, 2006, 16(1):109-112.
[11]
[12] Liu Huixia, Yang Shengjun, Wang Xiao, et al. Experiment study and numerical simulation of pulsed laser ablation crater[J]. Chinese Journal of Lasers, 2009, 36(1):220-223.(in Chinese)刘会霞, 杨胜军, 王霄, 等. 脉冲激光烧蚀凹腔的实验分析与数值模拟[J]. 中国激光, 2009, 36(1):220-223.
[13]
[14] Allman. Laser-beam Interactions with Materials Physical Principles and Applications[M]. Beijing:Science Press, 1994:55.(in Chinese)奥尔曼. 激光与物质相互作用原理及应用[M]. 北京:科学出版社, 1994:55.
[15] Tunna L, O'Neill W, Khan A, et al. Analysis of laser micro drilled holes through aluminium for micro-manufacturing applications[J]. Optics and Lasers in Engineering, 2005, 43(9):937-950.
[16]
[17] Chu Qingchen, Yu Gang, Lu Guoquan, et al. Two-dimensional numerical investigation for the effects of laser process parameters on hole type during laser drilling[J]. Chinese Journal of Lasers, 2011, 38(6):1-6.(in Chinese)褚庆臣, 虞钢, 卢国权, 等. 激光打孔工艺参数对孔型影响的二维数值模拟研究[J]. 中国激光, 2011, 38(6):1-6.
[18]
[19]
[20] Phipps C R, Turner T P, Harrison R F, et al. Impulse coupling to targets in vacuum by KrF, HF, and CO2 single-pulse lasers[J]. Journal of Applied Physics, 1988, 64(3):1083.
[21] Semak V V, Knorovsky G A, MacCallum D O, et al. Effect of surface tension on melt pool dynamics during laser pulse interaction[J]. Journal of Physics D:Applied Physics, 2006, 39(3):590-595.
[22]
[23] Konstantinos Salonitis, Aristidis Stournaras, George Tsoukantas, et al. A theoretical and experimental investigation on limitations of pulsed laser drilling[J]. Journal of Materials Processing Technology, 2007, 183(1):96-103.
[24]
[25]
[26] Zhou Jun, Tsai Hai-Lung, Wang Peichung. Transport phenomena and keyhole dynamics during pulsed laser welding[J]. Journal of Heat Transfer, 2006, 128(7):680.
[27] Zhang Duanming, Li Zhihua, Guan Li, et al. Kinetic Principle of Pulse Laser Deposition[M]. Beijing:Science Press, 2011:45-64.(in Chinese)张端明, 李智华, 关丽, 等. 脉冲激光沉积动力学原理[M]. 北京:科学出版社, 2011:45-64.
[28]
[29]
[30] Herman P R, Breitling D, Ruf A, et al. Fundamental aspects in machining of metals with short and ultrashort laser pulses[C]//SPIE, 2004, 5339:49-63.
[31] Chan C L, Mazumder J, Chen M M. Effect of surface tension gradient driven convection in a laser melt pool:Three-dimensional perturbation model[J]. Journal of Applied Physics, 1988, 64(11):6166.