[1] Xu Jianqiang, Jiang Chi, Zhang Hui. et al. Study on fiber sensor for measuring surface roughness[J]. Metrology Journal, 2002, 23(4): 280-281. (in Chinese)徐建强,江驰,张惠,等.检测表面粗糙度的光纤传感器研究[J]. 计量学报,2002, 23(4): 280-281.
[2] Feng Mingshen, Sui Chenghua. Study on two wavelength fiber sensor for measuring surface roughness[J]. Chinese Journal of Quantum Electronics, 2004, 21(6): 873-878. (in Chinese)丰明坤,隋成华. 用于表面粗糙度检测的双波长光纤传感器研究[J]. 量子电子学报, 2004, 21(6): 873-878.
[3] Li Yafei. Study on a new reflective optical fiber sensor[J]. Chinese Journal of Scientific Instrument, 2005, 26(10): 1097-1099. (in Chinese)李亚非.一种反射式光纤传感器的研究[J]. 仪器仪表学报, 2005, 26(10): 1097-1099.
[4] Xu Xiaomei. Inner surface roughness measurement of holes based on reflective intensity modulation fiber optic Sensor[D]. Harbin: Harbin Institute of Technology, 2010. (in Chinese)徐晓梅. 反射式强度调制型光纤传感孔内表面粗糙度检测技术研究[D]. 哈尔滨: 哈尔滨工业大学, 2010.
[5] Wang Huaping, Zhou Zhi, Wang Qian, et al. Strain transfer errors of optical fiber sensors Embedded in asphalt pavement[J]. Optics and Precision Engineering, 2015, 23(6): 1499-1507. (in Chinese)王花平, 周智,王倩,等. 光纤传感器埋入沥青路面基体的应变传递误差[J]. 光学精密工程, 2015, 23(6): 1499-1507.
[6] Zhang Ping, Zhang Xiaodong, Dong Xiaoni. Output characteristics of sensor with two-circle coaxial optical fiber in lubricating oil medium[J]. Chinese Optics, 2015, 8(3):439-446. (in Chinese)张平,张小栋,董晓妮. 双圈同轴光纤传感器在润滑油介质中的输出特性[J]. 中国光学,2015, 8(3): 439-446.
[7] Liu Ying, Lang Zhiguo, Tang Wenyan. Development of measurement system about light-section microscope for surface roughness[J]. Infrared and Laser Engineering, 2012, 41(3): 775-779. (in Chinese)刘颖, 朗治国,唐文彦. 表面粗糙度光切显微镜测量系统的研制[J]. 红外与激光工程, 2012, 41(3): 775-779.
[8] Guo Ruipeng. Theoretical and experimental investigation of in-process measurement of surface characteristic parameter based on laser scattering[D]. Shanghai: Shanghai JiaoTong University, 2011. (in Chinese)郭瑞鹏. 基于激光散射的在线检测表面特性参数的理论分析和实验研究[D]. 上海: 上海交通大学, 2011.
[9] Li Lijuan. Research on applying laser scattering characteristic of object to measure surface microcosmic profile precision of steel plate[D]. Changchun: Changchun University of Science and Technology, 2005. (in Chinese)李丽娟. 目标激光散射特性在钢板表面微观轮廓精度测量中的应用研究[D]. 长春:长春理工大学, 2005.
[10] Shi Zhenhua, Lin Guanyu, Wang Shurong, et al. Numerical analysis of small particle measurement based on the theory of laser Scattering[J]. Infrared and Laser Engineering, 2015, 44(7): 2189-2194. (in Chinese)石振华, 林冠宇,王淑荣,等. 基于激光散射理论的微小颗粒测量的数值分析[J]. 红外与激光工程,2015, 44(7): 2189-2194.
[11] Gale M F Ruiz, Hogert E N. Apparent and real roughness[J]. Optics and Lasers in Engineering, 2007, 45(8): 947-952.
[12] Lorenzo Basano, Stefano Leporatti, Pasquale Ottonello, et al. Measurements of surface roughness: use of a CCD camera to correlate doubly scattered speckle patterns[J]. Applied Optics, 1995, 34(31): 7286-7290.
[13] Peter Lehmann. Surface-roughness measurement based on the intensity correlation function of scattered light under speckle-pattern illumination[J]. Applied Optics, 1999, 38(7): 1144-1152.
[14] Wang Yonghong, Li Junrui, Sun Jianfei, et al. Frequency domain filtering for phase fringe patterns of digital speckle pattern interferometry[J]. Chinese Optics, 2014, 7(3): 389-395. (in Chinese)王永红,李骏睿,孙建飞,等. 散斑干涉相位条纹图的频域滤波处理[J]. 中国光学, 2014, 7(3): 389-395.
[15] Kong Ping, Yang Hui, Lin Weimin, et al. Measurement of particle sizes by contrast of dynamic laser speckle[J]. Optics and Precision Engineering, 2014, 22(10): 2633-2638. (in Chinese)孔平,杨晖, 林伟民,等. 动态散斑对比度颗粒测量法[J]. 光学精密工程, 2014, 22(10): 2633-2638.
[16] Fu Huaiyang, Zhou Sizhong, Jiang Kai, et al. Effects of mirror surface roughness on encircled energy for far ultraviolet telescopes[J]. Infrared and Laser Engineering, 2014, 43(8): 2562-2567. (in Chinese)付怀洋,周泗忠,姜凯,等. 镜面粗糙度对远紫外望远镜能量集中度的影响[J]. 红外与激光工程,2014, 43(8): 2562-2567.
[17] Heng Zhao, Hua Dengxin. Modifications to Beckmann-Kirchhoff model for random rough surfaces with non-paraxial angles[J]. Journal of Xi'an University of Technology, 2013, 29(3): 285-289.
[18] Stover J C, Serati S A, Cillespie C H. Calculation of surface statistics from light scatter[J]. Optical Engineering, 1984, 23(4): 406-412.
[19] Xiao Jing, Zhang Bin. Influence of the optical components contamination on the signal to noise ratio in infrared optical systems[J]. Infrared and Laser Engineering, 2012, 41(4): 1010-1016. (in Chinese)肖静,张彬.光学元件污染对红外光学系统信噪比的影响分析[J]. 红外与激光工程,2012, 41(4): 1010-1016.
[20] Harvey J E, Krywonos A, Bogunovic D. Nonparaxial scalar treatment of sinusoidal phase gratings[J]. Journal of OSA-A, 2006, 23(4): 858-865.
[21] Sven S, Angela D, Luisa C, et al. Modeling of light scattering in different regimes of surface roughness[J]. Optics Express, 2011, 19(10): 9820-9835.