[1] |
|
[2] |
Xu Qinglan, Wu Fan, Wu Shibin, et a1. Super smooth surfacing fabrication for lightweight silicon carbide plan mirror [J]. Opto- Electronic Engineering, 2004, 31(9): 22-25. (in Chinese) 徐青兰, 伍凡, 吴时彬, 等. 轻质碳化硅平面反射镜超光滑 表面加工[J]. 光电工程, 2004, 31(9): 22-25. |
[3] |
|
[4] |
Chow W W, George N L. A method for sub-aperture testing interferogram reduction[J]. Optics Letters, 1983, 8(9): 468-470. |
[5] |
|
[6] |
Peng Su. Absolute measurements of large mirrors [D]. Arozina: The University Of Arizona, 2008. |
[7] |
|
[8] |
Wang Lihua, Wu Shibin, Hou Xi, et al. Measurement of flat wavefront by sub-aperture stitching interferometry [J]. Opto- electronic Engineering, 2009, 36(6): 126-130. (in Chinese) 汪利华, 吴时彬, 侯溪, 等. 子孔径拼接干涉检测大口径平 面波前[J]. 光电工程, 2009, 36(6): 126-130. |
[9] |
|
[10] |
Wang Xiaokun. Research on the technique for testing of aspheric surfaces by sub-aperture stitching interferometry[D]. Changchun: Changchun Institute of Optics, Fine Mechanics and Physics, CAS, 2008. (in Chinese) 王孝坤.子孔径拼接干涉检测非球面技术的研究[D]. 长春: 中国科学院长春光学精密机械与物理研究所, 2008. |
[11] |
|
[12] |
Mikael Sjodahl, Bozenko F. Oreb Stitching interferometric measurement data for inspection of large optical components[J]. Opt Eng, 2001, 41(2): 403-408. |
[13] |
|
[14] |
Zhao Chunyu, Robert A Sprowl. Figure measurement of a large optical flat with a Fizeau interferometer and stitching technique[C]//SPIE, 2006, 6293: 1-9. |
[15] |
Dai Guangming. Nonrecursive determination of orthonormal polynomials with matrix formulation[J] Optics Letters, 2007, 32(1): 74-76. |
[16] |
|
[17] |
Peng Su, Jim Burge. Maximum likelihood estimation as a general method of combining sub -aperture data for interferometric testing[C]//SPIE, 2006, 6342: 1-6 |
[18] |
|
[19] |
Wang Xiaokun, Zhang Xuejun. Preliminary study on the test of asphere using sub-aperture stitching method [J]. Optical Technology, 2006, 32(5): 673-681. (in Chinese) 王孝坤, 张学军. 子孔径拼接检测非球面的初步研究[J]. 光学技术, 2006, 32(5): 673-681. 闫力松等:基于非理想标准镜的子孔径拼接干涉检测技术研究183 |