[1] Nie Xiangfan, He Weifeng, Zhou Liucheng, et al. Experiment investigation of laser shock peening on TC6 titanium alloy to improve high cycle fatigue performance[J]. Materials Science and Engineering A, 2014, 594:161-167.
[2] Jiao Yang, He Weifeng, Sun Ling, et al. Study on compound technology of laser shock peening and aluminizing improve the mechanical properties of K417 alloy[J]. Infrared and Laser Engineering, 2015, 44(8):2274-2279. (in Chinese)焦阳, 何卫锋, 孙岭, 等. 激光喷丸与渗铝复合工艺提高K417合金力学性能研究[J]. 红外与激光工程, 2015, 44(8):2274-2279.
[3] An Zhibin, Shen Xiaojun, Gao Shan, et al. Nanocrystallization of Ni-based superalloy K403 by laser shock peening[J]. Infrared and Laser Engineering, 2016, 45(9):921002. (in Chinese)安志斌, 沈晓骏, 高山, 等. 激光冲击强化K403镍基高温合金表面纳米化[J]. 红外与激光工程, 2016, 45(9):921002.
[4] Li Yinghong, Zhou Liucheng, He Weifeng, et al. The strengthening mechanism of a nickel-based alloy after laser shock processing at high temperatures[J]. Science and Technology of Advanced Materials, 2013, 14:055010.
[5] Zhang Lei, Lu Jinzhong, Zhang Yongkang, et al. Effects of processing parameters on fatigue properties of LY2 Al alloy subjected to laser shock processing[J]. Chinese Optics Letters, 2011, 9(6):061406.
[6] Li Yuqin, Li Yinghong, He Weifeng, et al. Wear resistance of 12CrNi3A steel after carburization and laser shock[J]. Chinese Journal of Lasers, 2013, 40(9):0903004. (in Chinese)李玉琴, 李应红, 何卫锋, 等. 激光冲击渗碳12CrNi3A钢的磨损性能[J]. 中国激光, 2013, 40(9):0903004.
[7] Shen Xiaojun, Wang Cheng, An Zhibin, et al. Effects of oblique laser shock processing on rotary bending fatigue of aero-engine fan shaft[J]. Infrared and Laser Engineering, 2015, 44(12):2274-2279. (in Chinese)沈晓骏, 汪诚, 安志斌, 等. 斜激光冲击对航空发动机风扇轴弯曲疲劳性能的影响[J]. 红外与激光工程, 2015, 44(12):2274-2279.
[8] Sano Yuji, Obata Minoru, Kubo Tatsuya, et al. Retardation of crack initiation and growth in austenitic stainless steels by laser peening without protective coating[J]. Materials Science and Engineering A, 2006, 417:334-340.
[9] Maawad E, Sano Y, Wagner L, et al. Investigation of laser shock peening effects on residual stress state and fatigue performance of titanium alloys[J]. Materials Science and Engineering A, 2012, 536:82-91.
[10] Sano Y, Masaki K, Gushi T, et al. Improvement in fatigue performance of friction stir welded A6061-T6 aluminum alloy by laser peening without coating[J]. Materials and Design, 2012, 36:809-814.
[11] Kalainathan S, Sathyajith S, Swaroop S. Effect of laser shot peening without coating on the surface properties and corrosion behavior of 316L steel[J]. Optics and Lasers in Engineering, 2012, 50:1740-1745.
[12] UroTrdan, Juan A Porro, Jos L Ocana, et al. Laser shock peening without absorbent coating(LSPwC) effect on 3D surface topography and mechanical properties of 6082-T651 Al alloy[J]. Surface Coatings Technology, 2012, 208:109-116.
[13] Che Zhigang. Numerical simulation and experimental study of microscale laser shock processing on metallic target[D]. Wuhan:Huazhong University of Science Technology, 2009. (in Chinese)车志刚. 微尺度激光冲击强化金属靶材数值模拟与实验研究[D]. 武汉:华中科技大学, 2009.
[14] China Aeronautical Materials Handbook. Edits Committee. The Second of China Aeronautical Materials Handbook[M]. Beijing:China Standards Press, 2001:645-651. (in Chinese) 《中国航空材料手册》编委会. 中国航空材料手册第2卷[M]. 北京:中国标准出版社, 2001:645-651.
[15] Kalainathan S, Prabhakaran S. Recent development and future perspectives of low energy laser shock peening[J]. Optics Laser Technology, 2106, 81:137-144
[16] Zhu Yunhu, Fu Jie, Zheng Chao, et al. Effect of laser shock peening without absorbent coating on the mechanical properties of Zr-based bulk metallic glass[J]. Optics Laser Technology, 2015, 75:157-163.
[17] Rubio-Gonzalez C, Ocan'a J L, Gomez-Rosas G, et al. Effect of laser shock processing on fatigue crack growth and fracture toughness of 6061-T6 aluminum alloy[J]. Materials Science and Engineering A, 2004, 386:291-292.
[18] Qiao Hongchao, Zhao Yixiang, Zhao Jibin, et al. Effect of laser peening on microstructure and properties if TiAl alloy[J]. Optics and Precision Engineering, 2014, 22(7):1766-1773. (in Chinese)乔红超, 赵亦翔, 赵吉宾, 等. 激光冲击强化对TiAl合金组织和性能[J]. 光学精密工程, 2014, 22(7):1766-1773.
[19] Montross C S, Wei T, Ye L, et al. Laser shock processing and its effects on microstructure and properties of metal alloys:a review[J]. International Journal of Fatigue, 2002, 24:1021-1036.
[20] Li B L, Godfrey A, Meng Q C, et al. Microstructure evolution of IF-steel during Cold Rolling[J]. Acta Materialia, 2004, 52:1069-1081.
[21] Fabbro R, Fournier J, Ballard P, et al. Physical study of laser-produced plasma in confined geometry[J]. Journal of Applied Physics, 1990, 68:775-784.
[22] Yilbas B S, Arif A E M. Laser shock processing of aluminium:model and experimental study[J]. Journal of Physics D:Applied Physics, 2007, 40:6740-6747.
[23] Zhou Liucheng. The compound strengthen mechanism of laser shock processing and its application on the turbine blades in areoengine[D]. Xi'an:Air Force Engineering University, 2014. (in Chinese)周留成. 激光冲击复合强化机理及在航空发动机涡轮叶片上的应用研究[D]. 西安:空军工程大学, 2014.