[1] Gong Shuang, Tian Jinrong, Li Kexuan, et al. Advances in new two-dimensional materials and its application in solid-state lasers [J]. Chinese Optics, 2018, 11(1): 18-30. (in Chinese) doi:  10.3788/CO.20181101.0018
[2] Wen Ya, Wu Chunting, Yuan Zerui, et al. Research progress of far-infrared solid-state lasers [J]. Chinese Optics, 2018, 11(6): 889-900. (in Chinese) doi:  10.3788/CO.20181106.0889
[3] Qiu Bocang, Martin Hai Hu, Wang Weimin, et al. Design and fabrication of 12 W high power and high reliability 915 nm semiconductor lasers [J]. Chinese Optics, 2018, 11(4): 590-603. (in Chinese) doi:  10.3788/CO.20181104.0590
[4] Su Yuhui, Gong Xiaoxia, Lei Shengqiong, et al. Discussion of reliability evaluation on infrared photovoltaic detector by noise [J]. Infrared Technology, 2009, 31(9): 509-512. (in Chinese)
[5] Rogalski A. Material considerations for third generation infrared photon detectors [J]. Infrared Physics and Technology, 2007, 50(2-3): 53-58.
[6] Stephen P Tobin. Thermal cycling induced changes in excess dark current in very long wavelength HgCdTe photodiodes at low temperature [J]. Journal of Electronic Materials, 2006, 35: 1411-1415. doi:  10.1007/s11664-006-0276-9
[7] Nie Zhiqiang, Wang Mingpei, Sun Yubo, et al. High power semiconductor laser lifetime prediction and failure analysis based on Weibull and Log-normal distribution [J]. Infrared and Laser Engineering, 2019, 48(S1): S105003. (in Chinese) doi:  10.3788/IRLA201948.S105003
[8] Peng Bo, Zhang Pu, Chen Tianqi, et al. Reliability of bonding interface in high power diode lasers [J]. Infrared and Laser Engineering, 2018, 47(11): 1105002. (in Chinese) doi:  10.3788/IRLA201847.1105002
[9] Hao Lichao, Huang Aibo, Lai Canxiong, et al. Discussion of reliability analysis on IRFPAs by bad pixel [J]. Infrared and Laser Engineering, 2016, 45(5): 0504004. (in Chinese) doi:  10.3788/IRLA201645.05040041645.0504004
[10] Yuan Ligang, Zhou Shouhuan, Zhao Hong, et al. 109.5 W output 1.94 micron Tm: YAP solid-state laser [J]. Infrared and Laser Engineering, 2019, 48(4): 0405006. (in Chinese) doi:  10.3788/IRLA201948.0405006
[11] Zhang Liming, Zhou Shouheng, Zhao Hong, et al. Introduction of Fe2+ doped mid-infrared solid state laser [J]. Laser and Infrared, 2012, 42(4): 360-364. (in Chinese)
[12] Niu Haisha, Zhu Lianqing, Liu Ning. Laser feedback stress measurement system based on fourier transform phase extraction method [J]. Optics and Precision Engineering, 2020, 26(8): 1954-1959. (in Chinese)
[13] Zhu Fan, Li Yingxian, Tan Jiubin. Design of high-accuracy laser beam collimation system [J]. Optics and Precision Engineering, 2020, 28(4): 817-826. (in Chinese)
[14] Miao Cunxiao, Xing Guozhu, Liu Jianfeng, et al. Design of current drive and alternating current temperature control system for high-precision laser [J]. Infrared and Laser Engineering, 2019, 48(9): 0905004. (in Chinese) doi:  0.3788/IRLA201948.0905004
[15] Bian Jintian, Nie Jinsong, Sun Xiaoquan. Mid-infrared lase rteehnology and its progress [J]. Infrared and Laser Engineering, 2006, 35(S3): 188-193. (in Chinese)