[1] |
Zhou Z, Zhang K, Zhou J, et al. Application of laser ultrasonic technique for non-contact detection of structural surface-breaking cracks [J]. Optics & Laser Technology, 2015, 73: 173−178. |
[2] |
Boone M A, Nielsen P, De K T, et al. Monitoring of stainless-steel slag carbonation using X-ray computed microtomography [J]. Environmental Science & Technology, 2014, 48(1): 674−680. |
[3] |
Hapca S, Baveye P C, Wilson C, et al. Three-dimensional mapping of soil chemical characteristics at micrometric scale by combining 2D SEM-EDX data and 3D X-Ray CT images [J]. Plos One, 2015, 10(9): e0137205. doi: 10.1371/journal.pone.0137205 |
[4] |
Shekhawat G S, Avasthy S , David V P. Probing buried defects in extreme ultraviolet multilayer blanks using ultrasound holography [J]. Nanotechnology, 2010, 6(9): 671−674. |
[5] |
Dravid V. Seeing the invisible: Scanning near-field ultrasound holography (SNFUH) for high resolution sub-surface imaging [J]. Microscopy & Microanalysis, 2013, 13(2): 1220−1221. |
[6] |
Doherty M, Sykes J M. Micro-cells beneath organic lacquers: a study using scanning Kelvin probe and scanning acoustic microscopy [J]. Corrosion Science, 2004, 46(5): 1265−1289. doi: 10.1016/j.corsci.2003.09.016 |
[7] |
Zhang G M, Harvey D M, Burton D R. Micro-nondestructive evaluation of microelectronics using three-dimensional acoustic imaging [J]. Applied Physics Letters, 2011, 98(9): 102110. |
[8] |
Kumazawa T, Toshiba K K. Ultrasound probe diagnosing apparatus, ultrasound diagnostic apparatus, and ultrasound probe diagnosing method:Japan,1839579A[P], 2007-10-03. |
[9] |
Wang X, Zhang G M, Ma H, et al. Measurement of a 3D ultrasonic wavefield using pulsed laser holographic microscopy for ultrasonic nondestructive evaluation [J]. Sensors, 2018, 18(2): 573. doi: 10.3390/s18020573 |
[10] |
Pelivanov I, Shtokolov A, Wei C, et al. A 1 kHz a-scan rate pump-probe laser-ultrasound system for robust inspection of composites [J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2015, 62(9): 1696−1703. doi: 10.1109/TUFFC.2015.007110 |
[11] |
Abolhassani M, Rostami Y. Speckle noise reduction by division and digital processing of a hologram [J]. Optik - International Journal for Light and Electron Optics, 2012, 123(10): 937−939. doi: 10.1016/j.ijleo.2011.06.060 |
[12] |
Vladimirov A P, Kamantsev I S, Veselova V E, et al. Use of dynamic speckle interferometry for contactless diagnostics of fatigue crack initiation and determining its growth rate [J]. Technical Physics, 2016, 61(4): 563−568. doi: 10.1134/S106378421604023X |
[13] |
Cai X O, Lai X J. Study on information content of the 3D object's coherent imaging and hologram information redundancy [J]. Optik - International Journal for Light and Electron Optics, 2012, 123(3): 240−245. doi: 10.1016/j.ijleo.2011.03.019 |
[14] |
Melninkaitis A, Tamosauskas G, Balciunas T, et al. Time-resolved off-axis digital holography for characterization of ultrafast phenomena in water [J]. Optics Letters, 2008, 33(1): 58. doi: 10.1364/OL.33.000058 |
[15] |
Hong K M, Kang Y J, Choi I Y, et al. Ultrasonic signal analysis according to laser ultrasound generation position for the detection of delamination in composites [J]. Journal of Mechanical Science and Technology, 2015, 29(12): 5217−5222. doi: 10.1007/s12206-015-1121-y |
[16] |
Yang C, Yan X, Zhu R, et al. Diffraction study of volume holographic gratings in dispersive photorefractive material for femtosecond pulse readout [J]. Optik - International Journal for Light and Electron Optics, 2010, 121(12): 1138−1143. doi: 10.1016/j.ijleo.2008.12.023 |
[17] |
Lee Y L, Lin Y C, Tu H Y, et al. Phase measurement accuracy in digital holographic microscopy using a wavelength-stabilized laser diode [J]. Journal of Optics, 2013, 15(15): 5403. |
[18] |
Cao L, Wang Z, Zhang H, et al. Volume holographic printing using unconventional angular multiplexing for three-dimensional display [J]. Applied Optics, 2016, 55(22): 6046. doi: 10.1364/AO.55.006046 |