[1] Wang Weihua. The nature and properties of amorphous matter[J]. Progress in Physics, 2013, 33(5):177-351. (in Chinese)汪卫华. 非晶态物质的本质与特征[J]. 物理学进展, 2013, 33(5):177-351.
[2] Liang Xiubing, Chen Yongxiong, Cheng Jiangbo, et al. Thermal Spraying Metastable Composite Coatings Technology[M]. Beijing:Science Press, 2014. (in Chinese)梁秀兵, 陈永雄, 程江波, 等. 电弧喷涂亚稳态复合涂层技术[M]. 北京:科学出版社, 2014.
[3] Liu L, Zhang C. Fe-based amorphous coatings:structures and properties[J]. Thin Solid Films, 2014, 561:70-86.
[4] Wu Hong, Lan Xiaodong, Liu Yong, et al. Fabrication, tribological and corrosion behaviors of a detonation gun
[5] Liu Hongxi, Leng Ning, Zhang Xiaowei, et al. Microstructure and wear behavior of WC/Co50 composite coatings on 40Cr cutting tool surface prepared by laser cladding[J]. Infrared and Laser Engineering, 2016, 45(1):0120001. (in Chinese)刘洪喜, 冷凝, 张晓伟,等. 40Cr刀具表面激光熔覆WC/Co50复合涂层额微观组织与磨损性能[J]. 红外与激光工程, 2016, 45(1):0120001.
[6] Yang Guang, Wang Xiangming, Wang Wei, et al. Microstructure and property of laser cladding TiC reinforced composition coating[J]. Infrared and Laser Engineering, 2014, 43(3):795-799. (in Chinese)杨光, 王向明, 王维, 等. 激光熔覆制备TiC颗粒增强涂层的组织和性能[J]. 红外与激光工程, 2014, 43(3):795-799.
[7] Yan Shixing, Dong Shiyun, Xu Binshi, et al. Effect of molten pool convection on pores and elements distribution in the process of laser cladding[J]. Infrared and Laser Engineering, 2014, 43(9):2832-2839. (in Chinese)闫世兴, 董世运, 徐滨士, 等. 激光熔覆过程中熔池对流运动对熔覆层气孔和元素分布的影响[J]. 红外与激光工程, 2014, 43(9):2832-2839.
[8] Jiang Shuai, Li Huaixue, Shi Zhiqiang, et al. Effects of hot isostatic pressing on microstructure and tensile properties of direct laser deposited Ti60 alloys[J]. Infrared and Laser Engineering, 2015, 44(1):107-111. (in Chinese)蒋帅, 李怀学, 石志强, 等. 热等静压对激光直接沉积Ti60合金组织与拉伸性能的影响[J]. 红外与激光工程, 2015, 44(1):107-111.
[9] Wang Yanfang, Xiao Lijun, Liu Mingxing, et al. Research progress of laser cladding amorphous coatings[J]. Laser Optoelectronics Progress, 2014, 51(7):070002. (in Chinese)王彦芳, 肖丽君, 刘明星, 等. 激光熔覆制备非晶复合涂层的研究进展[J]. 激光与光电子学进展, 2014, 51(7):070002.
[10] Zhang Luan, Dong Chuang, Wang Cunshan, et al. Laser cladding of Fe-B-Si iron base amorphous composite materials on 45 steel surface[J]. Transactions of Materials and Heat Treatment, 2012, 33(10):116-123. (in Chinese)张娈, 董闯, 王存山, 等. 45钢表面激光熔覆Fe-B-Si铁基非晶复合材料[J]. 材料热处理学报, 2012, 33(10):116-123.
[11] Zhu Yuanyuan, Li Zhuguo, Li Ruifeng, et al. High power diode laser cladding of Fe-Co-B-Si-C-Nb amorphous coating:layered microstructure and properties[J]. Surface and Coatings Technology, 2013, 235:699-705.
[12] Fu Qin, Hu Shubing. Properties of Fe-Mo-Ni-Si-B amorphous nanocrystalline composite coating fabricated by laser cladding[J]. Transactions of Materials and Heat Treatment, 2015, 36(11):209-213. (in Chinese)付琴, 胡树兵. 激光熔覆制备Fe-Mo-Ni-Si-B非晶纳米晶复合涂层的性能[J]. 材料热处理学报, 2015, 36(11):209-213.
[13] Wang Yanfang, Lu Qinglong, Xiao Lijun, et al. Laser cladding Fe-Cr-Si-P amorphous coatings on 304L stainless[J]. Rare Metal Materials and Engineering, 2014, 43(2):274-277.
[14] Wang Yanfang, Li Li, Lu Qinglong, et al. Laser cladding Fe-based amorphous coatings on stainless substrate[J]. Chinese Journal of Lasers, 2011, 38(6):0603017. (in Chinese)王彦芳, 栗荔, 鲁青龙, 等. 不锈钢表面激光熔覆铁基非晶涂层研究[J]. 中国激光, 2011, 38(6):0603017.
[15] Lu Qinglong, Wang Yanfang, Li Li, et al. Effects of scanning speed on microstructure and properties of laser cladding Fe-based amorphous composite coatings[J]. Chinese Journal of Lasers, 2013, 40(2):0203007. (in Chinese)鲁青龙, 王彦芳, 栗荔, 等. 扫描速度对激光熔覆铁基非晶复合涂层组织性能的影响[J]. 中国激光, 2013, 40(2):0203007.
[16] Hu Zhuangqi, Song Qihong, Zhang Haifeng, et al. Metal Metastable Materials[M]. Beijing:Science Press, 2006. (in Chinese)胡壮麒, 宋启洪, 张海峰, 等. 亚稳金属材料[M]. 北京:科学出版社, 2006.
[17] An Xulong, Liu Qibin, Zheng Bo. Microstructure and properties of laser cladding high entropy alloy MoFeCrTiWAlxSiy coating[J]. Infrared and Laser Engineering, 2014, 43(4):1140-1144. (in Chinese)安旭龙, 刘其斌, 郑波. 激光熔覆制备高熵合金MoFeCrTi WAlxSiy涂层的组织与性能[J]. 红外与激光工程, 2014, 43(4):1140-1144.