[1] Tang Shujun, Liu Hongxi, Zhang Xiaowei, et al.Microstructure and property of selective laser cladding Ni-Al intermetallic compound coating on H13 steel surface[J]. Infrared and Laser Engineering, 2014, 43(5):1621-1626. (in Chinese) 唐淑君, 刘洪喜, 张晓伟,等. H13钢表面激光选区熔覆Ni-Al金属间化合物涂层的组织与性能[J]. 红外与激光工程, 2014, 43(5):1621-1626.
[2] Yang Guang, Wang Xiangming, Wang Wei, et al. Microstructure and property of laser cladding TiC reinforced composition coating[J]. Infrared and Laser Engineering, 2014, 43(3):795-799. (in Chinese) 杨光, 王向明, 王维,等. 激光熔覆制备TiC颗粒增强涂层的组织和性能[J]. 红外与激光工程, 2014, 43(3):795-799.
[3] An Xulong, Liu Qibin, Zheng Bo. Microstructure and properties of laser cladding high entropy alloy MoFeCrTiWAl_xSi_y coating[J]. Infrared and Laser Engineering, 2014, 43(4):1140-1144. (in Chinese) 安旭龙, 刘其斌, 郑波. 激光熔覆制备高熵合金MoFeCrTiWAl_x Si_y涂层的组织与性能[J]. 红外与激光工程, 2014, 43(4):1140-1144.
[4] Shi Tuo, Wang Yiqing, Lu Bingheng, et al. Laser cladding forming of cantilevered thin-walled part based on hollow-laser beam inside powder feeding technology[J]. Chinese J Lasers, 2015, 42(10):1003003. (in Chinese) 石拓, 王伊卿, 卢秉恒, 等. 中空激光内送粉熔覆成形悬垂薄壁件[J]. 中国激光, 2015, 42(10):1003003.
[5] Yu Lingling, Shi Shihong, Di Keyun. Research on the laser cladding inclined wall accumulation based on the internal laser coaxial-powderFeeding technology[J]. Laser and Infrared, 2009, 39(3):264-266. (in Chinese) 郁玲玲, 石世宏, 狄科云. 基于光内同轴送粉技术的激光熔覆斜壁堆积成形研究[J]. 激光与红外, 2009, 39(3):264-266.
[6] Lu Bin, Zhu Gangxian, Wu Jizhuo, et al. Laser direct forming process of thin-walled blade using variable spot by inside-beam powder feeding[J]. Chinese J Lasers, 2015, 42(12):1203003. (in Chinese) 陆斌, 朱刚贤, 吴继琸, 等. 基于光内送粉激光变斑直接成形薄壁叶片的工艺研究[J]. 中国激光, 2015, 42(12):1203003.
[7] Jiang Fubing, Shi Shihong, Fu Geyan. Numerical simulation of powder-gas flow field of inside-beam powder feeding nozzle with changing attitude[J]. Laser Technology, 2015, 39(2):145-151. (in Chinese) 姜付兵, 石世宏, 傅戈雁. 光内送粉喷头空间变姿态粉气流场数值模拟[J]. 激光技术, 2015, 39(2):145-151.
[8] Cai Wei, Fu Geyan, Shi Shihong, et al. Research on thickness control of variable diameter solid with coaxial inside-beam powder feeding laser cladding by defocusing technique[J]. Chinese J Lasers, 2012, 39(7):0703003. (in Chinese) 蔡伟, 傅戈雁, 石世宏, 等. 基于离焦技术的光内送粉堆积变径体壁厚控制研究[J]. 中国激光, 2012, 39(7):0703003.
[9] Meng Weidong, Shi Shihong, Shi Tuo, et al. Forming technology research of laser accumulation of reducing solid of revolution with changing laserhead posture[J]. Chinese J Lasers, 2015, 42(10):1003006. (in Chinese) 孟伟栋, 石世宏, 石拓, 等. 空间变姿态激光堆积变径回转体成形技术研究[J]. 中国激光, 2015, 42(10):1003006.
[10] Fu Geyan, Liu Yu, Shi Shihong, et al. Control of process parameters for accumulate screwy thin-walled part by laser cladding with coaxial inside-beam powder feeding[J],Electromachining and Mould, 2014(2):43-46. (in Chinese) 傅戈雁, 刘宇, 石世宏, 等.光内同轴送粉激光熔覆堆积扭曲薄壁件工艺参数的控制[J]. 电加工与模具, 2014(2):43-46.
[11] Shi Gaolian, Shi Shihong, Zhang Jia. The influence of defocusing amount of hollow beam on the quality of single cladding channel[J]. Applied Laser, 2012, 32(6):505-509. (in Chinese) 石皋莲, 石世宏, 张甲. 中空光离焦量对单熔道质量的影响[J]. 应用激光, 2012, 32(6):505-509.