[1] |
Zhang Xuejun, Tang Siyi, Zhao Hengyue, et al. Research status and key technologies of 3D printing[J]. Journal of Materials Engineering, 2016, 44(2):122-128. (in Chinese) |
[2] |
Yang Yongqiang, Liu Yang, Song Changhui. The status and progress of manufacturing of metal parts by 3D printing technology[J]. Mechanical and Electrical Engineering Technology, 2013, 42(4):1-7. (in Chinese) |
[3] |
Li Huaixue, Sui Fan, Huang Baiying. Development and application of laser additive manufacturing for metal component[J]. Aeronautical Manufacturing Technology, 2012, 416(20):26-31. (in Chinese) |
[4] |
Lu Bingheng, Li Dichen. Development of the additive manufacturing(3D printing) technology[J]. Machine Building Automation, 2013, 42(4):1-4. (in Chinese) |
[5] |
Huang Weidong. Laser Solid Forming[M]. Xi'an:Northwestern Polytechnical University Press, 2007. (in Chinese) |
[6] |
Kumar S. Selective laser sintering/melting[J]. Comprehensive Materials Processing, 2014, 26(3):93-134. |
[7] |
Zhang Yuanliang, Zhang Hongchao, Zhao Jiaxu, et al. Review of non-destructive testing for remanufacturing of high-end equipment[J]. Journal of Mechanical Engineering, 2013, 49(7):80-90. (in Chinese) |
[8] |
Xu Binshi, Dong Shiyun. Laser Remanufacturing Technology[M]. Beijing:National Defense Industry Press, 2016. (in Chinese) |
[9] |
Khairallah S A, Anderson A T, Rubenchik A, et al. Laser powder-bed fusion additive manufacturing:Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones[J]. Acta Materialia, 2016, 108:36-45. |
[10] |
Murr L E, Gaytan S M, Medina F, et al. Characterization of Ti-6Al-4V open cellular foams fabricated by additive manufacturing using electron beam melting[J]. Materials Science Engineering A, 2010, 527(7-8):1861-1868. |
[11] |
Yong H, Ming C L, Mazumder J, et al. Additive manufacturing:current state, future potential, gaps and needs, and recommendations[J]. Journal of Manufacturing Science Engineering, 2015, 137(1):014001. |
[12] |
Brown D W, Bernardin J D, Carpenter J S, et al. Neutron diffraction measurements of residual stress in additively manufactured stainless steel[J]. Materials Science Engineering A, 2016, 678(15):291-298. |
[13] |
Sander J, Hufenbach J, Giebeler L, et al. Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting[J]. Materials Design, 2016, 89(15):335-341. |
[14] |
Gu D, Hong C, Jia Q, et al. Combined strengthening of multi-phase and graded interface in laser additive manufactured TiC/Inconel 718 composites[J]. Journal of Physics D Applied Physics, 2014, 47(4):45309-45319. |
[15] |
Cox S C, Jamshidi P, Eisenstein N M, et al. Adding functionality with additive manufacturing:Fabrication of titanium-based antibiotic eluting implants[J]. Materials Science Engineering C, 2016, 533(64):407-415. |
[16] |
Kim T B, Yue S, Zhang Z, et al. Additive manufactured porous titanium structures:through-process quantification of pore and strut networks[J]. Journal of Materials Processing Technology, 2014, 214(11):2706-2715. |
[17] |
Ibrahim K A, Wu B, Brandon N P. Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering[J]. Materials Design, 2016, 106(15):51-59. |
[18] |
Benedetti M, Cazzolli M, Fontanari V, et al. Fatigue limit of Ti6Al4V alloy produced by selective laser sintering[J]. Procedia Structural Integrity, 2016(2):3158-3167. |
[19] |
Cerniglia D, Scafidi M, Pantano A, et al. Inspection of additive-manufactured layered components[J]. Ultrasonics, 2015, 62(7):292-298. |
[20] |
Mengucci P, Barucca G, Gatto A, et al. Effects of thermal treatments on microstructure and mechanical properties of a Co-Cr-Mo-W biomedical alloy produced by laser sintering[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2016, 60(March):106-117. |
[21] |
Li P. Constitutive and failure behaviour in selective laser melted stainless steel for microlattice structures[J]. Materials Science Engineering A, 2015, 622(12):114-120. |
[22] |
Sun Z, Tan X, Shu B T, et al. Selective laser melting of stainless steel 316L with low porosity and high build rates[J]. Materials Design, 2016, 104(15):197-204. |
[23] |
Baek S W, Song E J, Kim J H, et al. Hydrogen embrittlement of 3-D printing manufactured austenitic stainless steel part for hydrogen service[J]. Scripta Materialia, 2017, 130(15):87-90. |
[24] |
Liu Bin. Ultrasonic and metal magnetic memory testing method for quality nondestructive evaluation of remanufacturing coating[D]. Harbin:Harbin Institute of Technology, 2013. (in Chinese) |
[25] |
American Society for Nondestructive Testing. American NDT Manual[M]. Beijing:World Book Publishing Company, 1999. (in Chinese) |
[26] |
Hu Mulin, Xie Changsheng, Huang Kaijin. Measurement of residual stress in multi-track laser-clad coating[J]. Laser Technology, 2006, 30(3):262-264. (in Chinese) |
[27] |
Dong Shiyun, Yan Xiaoling, Xu Binshi. Influence of microstructure and residual stress on surface stress measurement of laser cladding layer by Rayleigh wave[J]. Journal of Mechanical Engineering, 2015, 51(24):50-56. (in Chinese) |
[28] |
Liu Bin, Dong Shiyun. Stress measurement of laser cladding coating with critically refracted longitudinal wave method[J]. Transactions of the China Welding Institution, 2014, 35(9):53-56. (in Chinese) |
[29] |
Liu B, Dong S. Stress evaluation of laser cladding coating with critically refracted longitudinal wave based on cross correlation function[J]. Applied Acoustics, 2016, 101(1):98-103. |
[30] |
Haat G, Calmon P, Lasserre F. Application of ultrasonic modeling to the positioning of defects in a cladded component[C]//American Institute of Physics Conference Proceeding, 2004(2):1.1711612. |
[31] |
Fang Yan, Chen Xichen. Research on key techniques of defect detection for laser remanufacturing[J]. Chinese Journal of Lasers, 2012, 39(4):54-59. (in Chinese) |
[32] |
Yan Xiaoling. Numerical simulation and experimental study on ultrasonic testing for laser cladding[D]. Beijing:Beijing Institute of Technology, 2015. (in Chinese) |
[33] |
Liu Bin, Gong Kai, Qiao Yanxin, et al. Evaluation of influence of preset crack burial depth on stress of laser cladding coating with metal magnetic memory[J]. Acta Metallurgica Sinica, 2016, 52(2):241-248. (in Chinese) |
[34] |
Dong Shiyun, Yan Shixing, Xu Binshi, et al. Laser cladding remanufacturing technology of cast iron cylinder head and its quality evaluation[J]. Journal of Academy of Armored Forces Engineering, 2013, 27(1):90-93. (in Chinese) |
[35] |
Shi Changliang. Metal magnetic memory and ultrasonic complex method for damage degree evaluation of used ferromagnetic component before remanufacturing[D]. Harbin:Harbin Institute of Technology, 2011. (in Chinese) |
[36] |
Chinese Society for Nondestructive Testing. 2016 China NDT annual report[R]. Shanghai:Nondestructive Testing Editorial Department, 2016. (in Chinese) |
[37] |
Deng Ziyun, Ma Bing, Yi Yinghui, et al. Microstructure and properties of nickel-based super alloys valve by laser cladding remanufacturing[J]. Ordnance Material Science and Engineering, 2013, 36(3):101-104. (in Chinese) |
[38] |
Wang Xiao, Shi Yiwei, Liang Jing, et al. The method for nondestructive testing additive manufacturing parts on line by laser ultrasonic:China, CN106018288A[P]. 2016-10-12. (in Chinese) |
[39] |
Men Ping, Dong Shiyun, Kang Xueliang, et al. Material early damage diagnosis with nonlinear ultrasound[J]. Chinese Journal of Scientific Instrument, 2017, 38(5):1101-1118. (in Chinese) |
[40] |
Chen Yunpeng, Li Mangmang, Tang Chenglong. Progression of online detection technologies of mechanical property of cold-rolled strip steels[J]. Physical Testing and Chemical Analysis Part A:Physical Testing, 2017, 53(12):859-865. (in Chinese) |
[41] |
Ukomski T, Stepinski T. Steel hardness evaluation based on ultrasound velocity measurements[J]. Insight-Non-Destructive Testing and Condition Monitoring, 2010, 52(11):592-596. |
[42] |
Freitas V L D A, Albuquerque V H C D, Silva E D M, et al. Nondestructive characterization of microstructures and determination of elastic properties in plain carbon steel using ultrasonic measurements[J]. Materials Science Engineering A, 2010, 527(16):4431-4437. |
[43] |
Rayes M M E, El-Danaf E A, Almajid A A. Ultrasonic characterization of heat-treatment effects on SAE-1040 and -4340 steels[J]. Journal of Materials Processing Tech, 2015, 216(2):188-198. |
[44] |
Wiskel J B, Kennedy J, Ivey D G, et al. Ultrasonic velocity and attenuation measurements in l80 steel and their correlation with tensile properties[C]//19th World Conference on Non-Destructive Testing, 2016(7):1-9. |
[45] |
Murthy G V S, Ghosh S, Das M, et al. Correlation between ultrasonic velocity and indentation-based mechanical properties with microstructure in Nimonic 263[J]. Materials Science Engineering A, 2008, 488(1-2):398-405. |