[1] He Minbo, Ma Zhiliang, Wei Chenghua, et al. Influence of pyrolysis on the laser ablation of carbon-fiber/epoxy composite[J]. Infrared and Laser Engineering, 2016, 45(3):0306001. (in Chinese)贺敏波, 马志亮, 韦成华,等. 热解对碳纤维/环氧复合材料激光烧蚀的影响[J]. 红外与激光工程, 2016, 45(3):0306001.
[2] Chen Zhenye. Production practice of hot rolled single sided stain-less steel clad plate[J]. Hot Working Technology, 2016(15):160-163. (in Chinese)陈振业. 热轧单面不锈钢复合板的生产实践[J]. 热加工工艺, 2016(15):160-163.
[3] Song Youbao, Li Long, Zhou Dejing. Research status and prospect of welding of laminated metal composite plate[J]. Welding, 2016(10):18-22. (in Chinese)宋友宝, 李龙, 周德敬. 金属层状复合板焊接研究现状与展望[J]. 焊接, 2016(10):18-22.
[4] Li Rui, Yang Xiaojun, Zhao Wei, et al. Effect of femtosecond laser micromachining on the roughness of cladding sidewalls[J]. Infrared and Laser Engineering, 2015, 44(11):3244-3249. (in Chinese)李睿, 杨小君, 赵卫,等. 飞秒激光加工对熔覆层侧壁粗糙度的影响[J]. 红外与激光工程, 2015, 44(11):3244-3249.
[5] Wu Dongjiang, Zhang Qiang, Guo Dongming. Experiment on bending of Al2O3 ceramic slice with CO2 CW-laser[J]. Optics and Precision Engineering, 2009, 17(10):2473-2479. (in Chinese)吴东江, 张强, 郭东明. Al2O3陶瓷薄片CO2连续激光弯曲试验[J]. 光学精密工程, 2009, 17(10):2473-2479.
[6] Zhang Pan, Wang Xuyue. Element diffusion and material properties in transition layer of bending zone in laminated plates[J]. Chinese J Lasers, 2016, 43(7):0702001. (in Chinese)张攀, 王续跃. 层合板激光弯折区过渡层元素扩散及材料性能[J]. 中国激光, 2016, 43(7):0702001.
[7] Jha G C, Nath A K, Roy S K. Study of edge effect and multi-curvature in laser bending of AISI 304 stainless steel[J]. Journal of Materials Processing Technology, 2008, 197(1):434-438.
[8] Wei Yujun. Research on the laser induced thermoforming of lightweight aluminum alloy plate[D]. Harbin:Harbin Institute of Technology, 2015. (in Chinese)魏裕君. 铝合金轻量化壁板的激光诱导热成形研究[D]. 哈尔滨:哈尔滨工业大学, 2015.
[9] Zahrani E G, Marasi A, Zahrani E G, et al. Experimental investigation of edge effect and longitudinal distortion in laser bending process[J]. Optics Laser Technology, 2013, 45(1):301-307.
[10] Pei Jibin. Research on the mechanism and deformation behavior of laser bending of shipbuilding steel plate[D]. Dalian:Dalian University of Technology, 2008. (in Chinese)裴继斌. 船用钢板激光弯曲成形机理及成形规律的研究[D]. 大连:大连理工大学, 2008.
[11] Shen H, Hu J, Yao Z. Analysis and control of edge effects in laser bending[J]. Optics Lasers in Engineering, 2010, 48(3):305-315.
[12] Dang Dongxian. The reducing methods research of unexpected deformations in laser bending[D]. Shanghai:Shanghai Jiao Tong University, 2012. (in Chinese)党东显. 激光弯曲成形非期望变形抑制方法研究[D]. 上海:上海交通大学, 2012.
[13] Shi Yongjun, Zhang Chen, Sun Guidong, et al. Study on reducing edge effects by using assistant force in laser forming[J]. Journal of Materials Processing Technology, 2016, 227:169-177.
[14] Chi Shanshan, Wang Xuyue, Xu Wenji. Numerical simulation on stainless steel-carbon steel laminated sheet considering interface during pulsed laser bending[J]. Chinese J Lasers, 2014, 41(11):1103002. (in Chinese)池闪闪, 王续跃, 徐文骥. 考虑结合面的不锈钢-碳钢层合板脉冲激光弯曲数值模拟[J]. 中国激光, 2014, 41(11):1103002.