[1] Siqueira R H M, Capella A, Riva R, et al. Comparing mechanical behavior of aluminum welds produced by Laser Beam Welding (LBW), Friction Stir Welding (FSW) and riveting for aeronautic structures[J]. Welding International, 2016, 19:1-7.
[2] Peng Jin, Zhang Wenjie, Wang Xingxing, et al. Numerical simulation of effect of filler wire melting and filling mode on molten pool in laser welding[J]. Infrared and Laser Engineering, 2018, 47(3):0306005. (in Chinese)
[3] Zhang Xinge, Li Liqun, Chen Yanbin, et al. Process and mechanical properties of laser-resistance hybrid welding for aluminum alloy T-joint[J]. Infrared and Laser Engineering, 2010, 39(1):138-142. (in Chinese)
[4] Sun Z Q, Chen R, Wu A R. New materials and technology of Chinese civil aircraft[C]//Proc ICAMCS, 2016:926-930.
[5] Janasekaran S, Jamaludin M F, Muhamad M R, et al. Autogenous double-sided T-joint welding on aluminum alloys using low power fiber laser[J]. International Journal of Advanced Manufacturing Technology, 2017, 90:3497-3505.
[6] Oliveira A C, Siqueira R H M, Riva R, et al. One-sided laser beam welding of autogenous T-joints for 6013-T4 aliminium alloy[J]. Material and Design, 2015, 65:726-736.
[7] Enz J, Khomenko V, Riekehr S, et al. Single-sided laser beam welding of a dissimilar AA2024-AA7050 T-joint[J]. Mater Des, 2015, 76:110-116.
[8] Tao W, Yang Z B, Chen Y B, et al. Double-sided fiber laser beam welding process of T-joints for aluminum aircraft fuselage panels:Filler wire melting behavior, process stability, and their effects on porosity defects[J]. Opt Laser Technol, 2013, 52:1-9.
[9] Qi Junfeng, Niu Zhen, Zhang Dongyun, et al. Control of shaping of welds for CO2 laser welding shipbuilding T-section aluminum alloy[J]. Chinese Journal of Lasers, 2008, 35(2):297-302. (in Chinese)
[10] Ma Xuyi, Gong Shuili, Zhang Jiuxing, et al. Influence of the welding conditions on weld defects in double-sided laser beam welded T-joints of Ti-6Al-4V alloy[J]. Chinese Journal of Lasers, 2016, 43(2):0203006. (in Chinese)
[11] Yang Z B, Tao W, Li L Q, et al. Numerical simulation of heat transfer and fluid flow during double-sided laser beam welding of T-joints for aluminum aircraft fuselage panels[J]. Opt Laser Technol, 2017, 91:120-129.
[12] Chen Kai, Yang Wuxiong, Huang Rui, et al. Porosity control of 1420 Al-Li alloy by dual-beam laser welding[J]. Infrared and Laser Engineering, 2010, 39(1):133-137. (in Chinese)
[13] Ma Yinan, Tao Wang, Chen Yanbin. Laser spot welding of LF6 aluminum with double laser beams[J]. Infrared and Laser Engineering, 2014, 43(3):707-711. (in Chinese)
[14] Lin R, Wang H P, Lu F, et al. Numerical study of keyhole dynamics and keyhole-induced porosity formation in remote laser welding of Al alloys[J]. International Journal of Heat and Mass Transfer, 2017, 108:244-256.