[1] |
Yang Qiang, Lu Zhongliang, Huang Fuxiang, et al. Research on status and development trend of laser additive manufacturing[J]. Aeronaut Manuf Techno, 2016, 507(12):26-31. (in Chinese) |
[2] |
Li Liang, Sun Jianke, Meng Xiangjun, et al. Application state and prospects for titanium alloys[J]. Tit Ind Prog, 2004, 21(5):19-24. (in Chinese) |
[3] |
Wang F, Williams S, Colegrove P, et al. Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V[J]. Metallurgical and Materials Transactions A, 2013, 44:968-977. |
[4] |
Zhang Jikui, Wang Xueyuan. Fatigue crack propagation behaviour in wire+arc additive manufactured Ti-6Al-4V:Effects of microstructure and residual stress[J]. Materials and Design, 2016, 90:551-561. |
[5] |
Leuders S, Thone M, Riemer A, et al. On the mechanical behavior of titanium alloy TiAl6V4 manufactured by selective laser melting:Fatigue resistance and crack growth performance[J]. Int J Fatigue, 2013, 48:300-307. |
[6] |
Wycisk E, Solbach A, Siddique S, et al. Effects of defects in laser additive manufacturing Ti-6Al-4V on fatigue properties[J]. Physics Procedia, 2014, 56:371-378. |
[7] |
He Ruijun, Wang Huaming. HCF properties of laser deposited Ti-6Al-2Zr-Mo-V alloy[J]. Acta Aeronaut et Astronaut Sin, 2010, 31(7):1488-1493. (in Chinese) |
[8] |
Shi X H, Zeng W D, Shi C L, et al. Study on fatigue crack growth rates of Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy with basket-weave microstructure[J]. Mat Sci Eng A, 2015, 621:143-148. |
[9] |
Jin O, Mall S. Effects of microstructure on short crack growth behavior of Ti-6Al-2Sn-4Zr-2Mo-0.1Si alloy[J]. Materials Science and Engineering, 2003, A359:356-367. |
[10] |
Sansoz F, Ghonem H. Effects of loading frequency on fatigue crack growth mechanisms in a/b Ti microstructure with large colony size[J]. Materials Science and Engineering, 2003, A356:81-92. |