[1] Alaa Elwany, Gustavo Tapia. A review on process monitoring and control in metal-based additive manufacturing[J]. Manufacturing Science and Engineering, 2014, 136(6):1-10.
[2] Shi Qimin, Gu Dongdong, Xia Mujian, et al. Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of Tic/Inconel718 composites[J]. Optics Laser Technology, 2016, 84:9-22.
[3] Zhong Chongliang, Andres Gasser, Jochen Kittel, et al. Improvement of material performance of Inconel718 formed by high deposition-rate laser metal deposition[J]. Material and Design, 2016, 98:128-134.
[4] Yu Jun, Lin Xin, Chen Junjie, et al. Mechanics and energy analysis on molten pool spreading during laser solid forming[J]. Applied Surface Science, 2010, 256:4612-4620.
[5] Jiang Shujuan, Liu Weijun, Xiang Fei. Research on measuring and control system of metal powder laser shaping[C]//International Conference on Mechatronics and Automation, 2006:1717-1721.
[6] Han Lijun, Liou F W, Srinvas Musti. Thermal behavior and geometry model of melt pool in laser material process[J]. Department of Mechanical and Aerospace, 2005, 127:1005-1014.
[7] Ravi G A, Hao X J, Wain N, et al. Direct laser fabrication of three dimensional components using SC420 stainless steel[J]. Materials and Design, 2013, 47:731-736.
[8] Amitava De, Tarasankar Debroy. Heat transfer and material flow during laser assisted multi-layer additive manufacturing[J]. Journal of Applied Physics, 2014, 116(116):124905.
[9] Lie Tang, Robert G. Melt pool temperature control for laser matal depisition processes-Part1:Online temperature control[J]. Journal of Manufacturing Science and Engineering, 2010, 132:0110101-0110109.
[10] Qiu Chunlei, Ravi G A, Chris Dance, et al. Fabrication of large Ti-6Al-4V structures by direct laser deposition[J]. Journal of Alloys and Compounds, 2015, 692:351-361.
[11] Parisa Farahmand, Liu Shuang, Zheng Zhe, et al. Laser cladding assisted by induction heating of Ni-WC composite enhanced by nano-WC and La2O3[J]. Ceramics International, 2014, 40(10):15421-15438.
[12] Tan Hua, Chen Jing, Lin Xin, et al. Process analysis for laser solid forming of thin-wall structure[J]. International Journal of Machine Tools Manufacture, 2010, 50(1):1-8.
[13] Srn Ocylok, Eugen Alexeev, Stefan Mann, et al. Correlation of melt pool geometry and process parameters during laser metal deposition by coaxial process monitoring[J]. Physics Procedia, 2014, 56:228-238.
[14] Song Lijun, Vijayavel Bagavath-Singh, Bhaskar Dutta, et al. Control of melt pool temperature and deposition height during direct metal deposition process[J]. Int J Adv Manuf Technol, 2012, 58(1):247-256.
[15] Tabernero I, Lamikiz A, Martnez S, et al. Geometric modelling of added layers by coaxial laser cladding[J]. Physics Procedia, 2012, 39:913-920.
[16] Ding Yaoyu, James Warton, Radovan Kovacevic. Development of sensing and control system for robotized laser-based direct metal addition system[J]. Additive Manufacturing, 2016, 10:24-35.
[17] Peng Dingcong. Basic principle and application of Kalman filter[J]. Software Guide, 2009, 8(11):32-35. (in Chinese)彭丁聪.卡尔曼滤波的基本原理及应用[J]. 软件导刊, 2009, 8(11):32-35.
[18] Liu Jichang, Li Lijun. Effects of process variables on laser direct formation of thin wall[J]. Science Direct, 2007, 39:231-236.
[19] Onwubolu G C, Davim J P, Carlos Oliveira, et al. Prediction of clad angle in laser cladding by powder using response surface methodology and scatter search[J]. Optics Laser Technology, 2007, 39:1130-1134.