[1] Thompson A M, Lampard D G. A new theorem in electrostatics and its application to calculable standards of capacitance[J]. Nature, 1956, 177(455):888.
[2] Thompson A M. The precise measurement of small capacitances[J]. IRE Trans Instrum, 1958, 7(3):245-253.
[3] Lu Z L, Huang L, Yang Y, et al. Research for reproducing SI unit of capacitance by the calculable capacitor with a movable guard rod[J]. Acta Metrologica Sinica, 2014, 35(6):521-527.
[4] Thompson A M. The cylindrical cross-capacitor as a calculable standard[C]//IEEE Transactions on Instrumentation and Meansurement, 1959, 106(27):307-310.
[5] Lampard D G, Cutkosky R D. Some results on the cross-capacitances per unit length of cylindrical three-terminal capacitors with thin dielectric films on their electrodes[C]//Proc IEE-Part C:Monographs, 1960, 107(11):112-119.
[6] Makow D, Campbell J B. Circular four electrode capacitors for capacitance standards[J]. Metrologia, 1972, 8(4):148-155.
[7] Rayner G H. NPL calculable capacitor[J]. IEEE Transactions on Instrumentation and Meansurement, 1972, 21(4):361-365.
[8] Cutkosky R D. New NBS measurements of the absolute farad and ohm[C]//IEEE Transactions on Instrumentation and Meansurement, 1974, 23(4):305-309.
[9] Cross Capacitor Group of National Institute of Metrology. A calculable cross capacitor and absolute measurement of electrical impedance[J]. Acta Metrologica Sinica, 1980(1):16-26.
[10] Jones K, Corney A C. The PEL calculable capacitor[J]. Metrologia, 1987, 24(1):1-11.
[11] Small G W. Refinements to the use of the NML calculable capacitor in relation to SI ohm determinations[C]//Conf Precis Electromagn Meas (CPEM), 1996:8-9.
[12] Trapon G, Thevenot O, Lacueille J C, et al. Realization of the farad at BNM-LCIE[C]//Conf Precis Electromagn Meas(CPEM), 1998:448-449.
[13] Small G W, Fiander J R. Design of a calculable cross-capacitor[C]//Conf Precis Electromagn Meas (CPEM), 2004:485-486.
[14] Thevenot O, Lahousse L, Consejo C, et al. Towards a determination of RK in terms of the new LNE calculable cross capacitor[C]//Proc Simposio de Metrologia, Santiago de Quertaro, 2008, 1142:1-7.
[15] Small G W, Fiander J R. Fabrication and measurement of the main electrodes of the NMIA-BIPM calculable cross capacitors[J]. IEEE Transactions on Instrumentation and Meansurement, 2011, 60(7):2489-2494.
[16] Yicheng W, Pratt J, Rae Duk L, et al. Main electrodes alignment for NIST calculable capacitor[C]//Conf Precis Electromagn Meas(CPEM), 2012:392-393.
[17] Lu Z, Huang L, Yang Y, et al. An initial reproduction of SI capacitance unit from a new calculable capacitor at NIM[J].IEEE Transactions on Instrumentation and Meansurement, 2015, 64(6):1496-1502.
[18] Wang J, Qian J, Liu Z, et al. Displacement determination of the guard electrode for the new calculable capacitor at NIM[C]//IEEE Transactions on Instrumentation and Measurement, 2016, 65(11):2569-2577.
[19] Yicheng W, Rae Duk L, Liang L, et al. Next-generation calculable capacitor using a tunable-laser interferometer[C]//Conf Precis Electromagn Meas (CPEM), 2008:686-687.
[20] Lawall J R. Fabry-Perot metrology for displacements up to 50 mm[J]. J Opt Soc Am A, 2005, 22(12):2786-2798.
[21] Durand M, Lawall J, Wang Y. Fabry-Perot displacement interferometry for next-generation calculable capacitor[J].IEEE Transactions on Instrumentation and Meansurement, 2011, 60(7):2673-2677.
[22] Wang Y, Yu Y, Pratt J R. Evaluation of a continuously variable calculable capacitor[J]. IEEE Transactions on Instrumentation and Meansurement, 2017, 66(6):1503-1510.
[23] Fletcher N, Goebel R, Robertsson L, et al. Progress towards a determination of RK at the BIPM[C]//Conf Precis Electromagn Meas(CPEM), 2012:252-253.
[24] Lampard D G. A new theorem in electrostatics with applications to calculable standards of capacitance[J]. IEE -Part C:Monographs, 1957, 104(6):271-280.
[25] Wang J B, Qian J, Liu Z Y, et al. Methode of phase correction of displacement measurement using Fabry-Perot interferometer in calculable capacitor[J]. Acta Physica Sinica, 2016, 65(11):110601.