[1] Santos E C, Shiomi M, Osakada K, et al. Rapid manufacturing of metal components by laser forming[J]. International Journal of Machine Tools Manufacture, 2006, 46(12-13):1459-1468.
[2] Yu Kuahai, Yang Xi, Yue Zhufeng. Parameterized molding design for variable thickness cooling turbine blade[J]. Journal of Machine Design, 2012, 29(2):8-11. (in Chinese)虞跨海, 杨茜, 岳珠峰. 变壁厚涡轮冷却叶片参数化造型设计[J]. 机械设计, 2012, 29(2):8-11.
[3] 吴立强, 尹泽勇, 蔡显新. 航空发动机涡轮叶片的多学科设计优化[J]. 航空动力学报, 2005(5):795-801.
[4] Xu Bingshi, Dong Shiyun, Men Ping, et al. Quality characteristics and nondestructive test and evaluation technology for laser additive manufacturing alloy steel components[J]. Infrared and Laser Engineering, 2018, 47(4):0401001. (in Chinese)徐滨士, 董世运, 门平, 等. 激光增材制造成形合金钢件质量特征及其检测评价技术现状[J]. 红外与激光工程, 2018, 47(4):0401001.
[5] Deng Zhiqiang, Shi Shihong, Zhou Bin, et al. Laser cladding forming of arcuate cantilevered entity part[J]. Infrared and Laser Engineering, 2017, 46(10):1006004. (in Chinese)邓志强, 石世宏, 周斌, 等. 弧形悬垂实体结构激光熔覆成形[J]. 红外与激光工程, 2017, 46(10):1006004.
[6] Tao Yunya, Xue Weipeng, Tang Hongfei, et al. Application of laser additive manufacturing technology in turbine blade and vane[J]. Gas Turbine Experiment and Research, 2016, 29(6):44-50, 55. (in Chinese)陶云亚, 薛伟鹏, 唐洪飞, 等. 激光增材制造技术在涡轮叶片中的应用[J]. 燃气涡轮试验与研究, 2016, 29(6):44-50, 55.
[7] Griffith M. The LENSTM success story[J]. Sandia Technologies, 2001, 3(3):9-10.
[8] Qi H, Azer M, Singh P. Adaptive toolpath deposition method for laser net shape manufacturing and repair of turbine compressor airfoils[J]. International Journal of Advanced Manufacturing Technology, 2010, 48(1-4):121-131.
[9] Lu Bin, Zhu Gangxian, Wu Jizhuo, et al. Laser direct forming process of thin-walled blade using variable spot by inside-beam powder feeding[J]. Chinese Journal of Lasers, 2015, 42(12):1203003. (in Chinese)陆斌, 朱刚贤, 吴继琸, 等. 基于光内送粉激光变斑直接成形薄壁叶片的工艺研究[J]. 中国激光, 2015, 42(12):1203003.
[10] Wu Jizhuo, Zhu Gangxian, Lu Bin, et al. Influence of self-regulation-effect on forming quality of thin-walled parts with variable laser spot cladding[J]. Journal of Xi'an Jiaotong University, 2016, 50(1):145-150. (in Chinese)吴继琸, 朱刚贤, 陆斌, 等. 自愈合效应对光内送粉激光变斑熔覆成形薄壁件的影响[J]. 西安交通大学学报, 2016, 50(1):145-150.
[11] Shi T, Lu B, Shi S, et al. Laser metal deposition with spatial variable orientation based on hollow-laser beam with internal powder feeding technology[J]. Optics Laser Technology, 2017, 88:234-241.
[12] Zhu G, Li D, Zhang A, et al. The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal deposition[J]. Optics Laser Technology, 2012, 44(2):349-356.
[13] Shen Ting, Shi Tuo, Fu Geyan, et al. Laser cladding forming and closed-loop control of thickness-variable eccentric ring structure[J]. Chinese Journal of Lasers, 2018, 45(3):0302007. (in Chinese)沈婷, 石拓, 傅戈雁, 等. 变壁厚偏心圆环结构激光熔覆成形及闭环控制[J]. 中国激光, 2018, 45(3):0302007.
[14] Shi Tuo, Lu Bingheng, Wei Zhengying, et al. Research of closed-loop control for desired layer height in laser metal deposition[J]. Chinese Journal of Lasers, 2017, 44(7):0702004. (in Chinese)石拓, 卢秉恒, 魏正英, 等. 激光金属沉积堆高闭环控制研究[J]. 中国激光, 2017, 44(7):0702004.