[1] Laborda A, Robinson A, Wang S, et al. Fatigue assessment of multilayer coatings using lock-in thermography[J]. Materials Design, 2018, 141:361-373.
[2] Zhao H, Zhou Z, Fan J, et al. Application of lock-in thermography for the inspection of disbonds in titanium alloy honeycomb sandwich structure[J]. Infrared Physics Technology, 2017, 81:69-78.
[3] Wang F, Wang Y H, Liu J Y, et al. Theoretical and experimental study on carbon/epoxy facings-aluminum honeycomb sandwich structure using lock-in thermography[J]. Measurement, 2018, 126:110-119.
[4] Huan H, Mandelis A, Liu L, et al. Local-stress-induced thermal conductivity anisotropy analysis using non-destructive photo-thermo-mechanical lock-in thermography (PTM-LIT) imaging[J]. NDT E International, 2017, 91:79-87.
[5] Feng Fuzhou, Min Qingxu, Zhu Junzhen, et al. Heating characteristics of metal fatigue crack in ultrasonic IR lock-in thermography[J]. Infrared and Laser Engineering, 2017, 46(7):0704004. (in Chinese)冯辅周, 闵庆旭, 朱俊臻, 等. 超声红外锁相热像中金属疲劳裂纹的生热特性[J]. 红外与激光工程, 2017, 46(7):0704004.
[6] Li Haoran, Zhu Yuyu, Wu Li. Study and development of lock-in thermal excitation source for infrared thermography nondestructive testing system[J]. Process Automation Instrumentation, 2017, 38(10):91-95. (in Chinese)李浩然, 朱玉玉, 武丽. 红外热成像无损检测系统锁相热激励源的研制[J]. 自动化仪表, 2017, 38(10):91-95.
[7] Busse G, Wu D, Karpen W. Thermal wave imaging with phase sensitive modulated thermography[J]. Journal of Applied Physics, 1992, 71(8):3962-3965.
[8] Sakagami T, Kubo S. Development of a new non-destructive testing technique for quantitative evaluations of delamination defects in concrete structures based on phase delay measurement using lock-in thermography[J]. Infrared Physics Technology, 2002, 43(3-5):311-316.
[9] Ishikawa M, Hatta H, Habuka Y, et al. Detecting deeper defects using pulse phase thermography[J]. Infrared Physics Technology, 2013, 57:42-49.
[10] Mu Yuwei. Numerical simulation and analysis of lock-in infrared nondestructive testing based on ANSYS[D]. Dalian:Dalian University of Technology, 2008:38-42. (in Chinese)穆玉伟. 基于ANSYS的锁相红外无损检测数值模拟及分析[D]. 大连:大连理工大学, 2008:38-42.
[11] Wang Zijun. Infrared phase nondestructive testing technology and its application[D]. Harbin:Harbin Institute of Technology, 2009:98-99. (in Chinese)汪子君. 红外相位法无损检测技术及其应用研究[D]. 哈尔滨:哈尔滨工业大学, 2009:98-99.
[12] Guo Jianguang, Gao Xiaorong, Guo Jianqiang, et al. On the dead zone of eddy current heating of lock-in thermography for unidirectional carbon fiber reinforced plastic[J]. Nondestructive Testing, 2017, 39(11):1-6. (in Chinese)郭建光, 高晓蓉, 郭建强, 等. 单向碳纤维增强复合材料的锁相涡流热成像检测盲区[J]. 无损检测, 2017, 39(11):1-6.
[13] Tao Shengjie. Research on infrared lock-in thermography and its application in quantitative detection of material defect[D]. Xi'an:Rocket Force University of Engineering, 2016:22-29. (in Chinese)陶胜杰. 红外锁相热成像技术及其在材料缺陷定量检测中的应用研究[D]. 西安:火箭军工程大学, 2016:22-29.