[1] |
|
[2] |
Sun R L, Mao J F, Yang D Z. Microscopic morphology and distribution of TiC phase in laser clad NiCrBSiC-TiC layer on titanium alloy substrate [J]. Surface and Coatings Technology, 2002, 155: 203-207. |
[3] |
Li Mingxi, He Yizhu, Sun Guoxiong. Laser cladding Co-based alloy/SiCp composite coatings on IF steel [J]. Materials and Design, 2004, 25: 355-358. |
[4] |
|
[5] |
|
[6] |
Wang Xinhong, Zhang Min, Qu Shiyao. Development and characterization of (Ti, Mo)C carbides reinforced Fe-based surface composite coating produced by laser cladding [J]. Optics and Lasers in Engineering, 2010, 48: 893-898. |
[7] |
Chang K C, Wei W J, Chen C. Oxidation behavior of thermal barrier coatings modified by laser remelting [J]. Surface and Coatings Technology, 1998, 102: 197-204. |
[8] |
|
[9] |
|
[10] |
Gonzlez R, Cadenas M, Fernndez R, et al. Wear behaviour of flame sprayed NiCrBSi coating remelt ed by flame or by laser[J]. Wear, 2007, 262: 301-307. |
[11] |
Lima M S F, Foliob F, Mischler S. Microstructure and surface properties of laser-remelted titanium nitride coatings on titanium[J]. Surface Coatings Technology, 2005, 199: 83-91. |
[12] |
|
[13] |
|
[14] |
Sun Ronglu, Liu Yong, Yang Dezhuang. Microstructure and tribological properties of NiCrBSi-TiC laser on titanium alloy substrate [J]. Chinese Journal of Lasers, 2003, 30(7): 659-662. (in Chinese) 孙荣禄, 刘勇, 杨德庄. 钛合金表面激光熔覆NiCrBSi-TiC 复合涂层的组织和摩擦磨损性能[J]. 中国激光, 2003, 30(7): 659-662. |
[15] |
|
[16] |
Nicolas Serres, Francoise Hlawka, Sophie Costil, et al. Microstructures and mechanical properties of metallic NiCrBSi and composite NiCrBSi-WC layers manufactured via hybrid plasma/laser process[J]. Applied Surface Science, 2011, 257: 5132-5137. |
[17] |
Zhang Xianpeng. Ferroalloy Dictionary [M]. Shenyang: Liaoning Science and Technology Publishing, 1996: 118. (in Chinese) 张显鹏. 铁合金辞典[M]. 沈阳: 辽宁科学技术出版社, 1996: 118. |
[18] |
|
[19] |
Ali Emamian, Corbin Stephen F, Amir Khajepour. The influence of combined laser parameters on in-situ formed TiC morphology during laser cladding[J]. Surface Coatings Technology, 2011, 206: 124-131. |