[1] |
Juang Jengdang. The testing of a general rotationally symmetrical aspherical surface by using a null lens in a Zygo interferometer meaurment[J]. Measurement, 1994, 13(2): 85-90. |
[2] |
|
[3] |
Wu Fan, Chen Qiang. Design of a null testing compensator for F/1.3 paraboloid mirror[J]. Opto-Electronic Engineering, 2004, 31(1): 12-13. |
[4] |
|
[5] |
Liu Hua, Lu Zhenwu, Li Fengyou, et al. Full aperture measurement of convex surfaces in interferometric test using holographic test plate[C]//Opt Commu, 2004, 241: 231-232. |
[6] |
|
[7] |
Kim C J. Polynomial fit of interferograms[J]. Appl Opt, 1982, 21(24): 4521-4522. |
[8] |
|
[9] |
Kim C, Wyant J. Subaperture test of a large flat on a fast aspheric surface[J]. J Opt Soc Am, 1981, 71: 1587. |
[10] |
|
[11] |
|
[12] |
Murphy P E, Forbes G, Fleig J, et al. Stitching interferometry: a flexible solution for surface metrology[J].Optics Photonics News, 2003, 14: 38-43. |
[13] |
Sergio V M. Obtaining the phase of an interferogram by use of an evolution strategy[J]. Appl Opt, 2002, 41: 3448-3452. |
[14] |
|
[15] |
Mlacara D. Optical Shop Testing[M]. New York: John Wiley and Sons, 1978. |
[16] |
|
[17] |
Jensen Stephen C, Chow Weng W, Laerece George N. Sub-aperture testing approaches: acomparison[J]. Applied Optics, 1984, (23): 740-742. |
[18] |
|
[19] |
Zhu Liming. The research on the testing method of aspheric mirror based on sub-aperture stitching[D]. Harbin: Harbin Institute of Technology, 2009: 23-24. (in Chinese) 朱黎明. 基于子孔径拼接的非球面检测方法研究[D]. 哈尔滨: 哈尔滨工业大学, 2009: 23-24. |
[20] |
|
[21] |
Li Xinnan, Zhang Mingyi. Study on the sub-aperture stitching interferometry for large plano-optics[J]. Optical Technique, 2006, 32(4): 514-517. |