[1] Bai Yu, Xing Tingwen, Li Hua, et al. Advances in foreign MWIR lens with high ratio [J]. Infrared and Laser Engineering, 2015, 44(5): 795-802. (in Chinese)
[2] Lu Yuting, Wang Weizhi. Alignment of large aperture gluing primary mirror with finite element method [J]. Spacecraft Recovery & Remote Sensing, 2017, 38(1): 38-44. (in Chinese)
[3] Dong Deyi, Li Zhilai, Li Ruigang, et al. Simulation and experiment of influence of adhesive curing on reflective mirror surface [J]. Optics and Precision Engineering, 2014, 22(10): 2698-2707. (in Chinese) doi:  10.3788/OPE.20142210.2698
[4] Liu Qiang, He Xin, Zhang Feng, et al. Calculation and control of adhesive layer in reflector athermal mount [J]. Optics and Precision Engineering, 2012, 20(10): 2229-2236. (in Chinese) doi:  10.3788/OPE.20122010.2229
[5] Huang Caifei, Chen Guoping, Wang Yu. Study on the influence of thickness of adhesive layer on mechanical properties of polypropylene reinforced with carbon fiber cloth [J]. Engineering Plastice Application, 2020, 48(11): 102-105. (in Chinese)
[6] Zhang Yu, Lou Guobiao, Li Guoqiang, et al. Experimental study of bond strength of anchorage adhesive after heating [J]. Journal of Tongji University (Natural Science), 2016, 44(11): 1723-1728. (in Chinese)
[7] Guo Junli, An Yuan, Li Zongxuan, et al. Bonding technique of mirror components in space camera [J]. Infrared and Laser Engineering, 2016, 45(3): 0313002. (in Chinese)
[8] Li Mengqing, Zhang Lei, Xing Lina, et al. Optimization design of athermal adhesive for rectangular space mirror [J]. Chinese Optics, 2016, 9(6): 704-712. (in Chinese)
[9] Zhou Xiaohua, Xing Hui, Yang Jukui. Epoxy selection for reflect mirror assembly in space remote sensor [J]. Spacecraft Recovery & Remote Sensing, 2019, 40(3): 65-72. (in Chinese)
[10] Gao Chao, Luo Shikui, Chen Fang, et al. Young’s modulus determination and selection for XM23 glue used in space camera optics [J]. Spacecraft Recovery & Remote Sensing, 2017, 38(2): 48-54. (in Chinese)
[11] Feng Wei, Xu Fei, Yuan Jialei. Tensile behavior and effect factors of double scarf-repaired composite laminates [J]. Acta Materiae Compositae Sinica, 2019, 36(6): 1421-1427. (in Chinese)
[12] Boesza A, Gruppbc F, Mottaghibonab A. et al. Analytic results for high precision and cryogenic lens holders [C]//Proceedings of SPIE, 2011, 8125: 81250G.