[1] |
Song Y S, Chang S, Tong S F, et al. Feature analysis of aeronautical laser communication system and airborne laser communication experiment [J]. Chinese Journal of Lasers, 2016, 43(12): 1206004. (in Chinese) doi: 10.3788/CJL201643.1206004 |
[2] |
Li X M, Wang L M, Li X, et al. Optimization of integrated tilt-mirror for laser communication antenna [J]. Chinese Journal of Lasers, 2021, 50(11): 20210143. (in Chinese) doi: 10.3788/IRLA20210143 |
[3] |
Ostaszewski M, Harford S, Doughty N, et al. Risley prism beam pointer[C]//SPIE, 2006, l6304: 630406. |
[4] |
Li S F, Xu W D, Zhao C Q. Determination and optimization of Risley prisms scanning parameters in laser 3D imaging [J]. Infrared and Laser Engineering, 2020, 49(8): 20190508. (in Chinese) doi: 10.3788/IRLA20190508 |
[5] |
Zhu J G, Li F, Huang Q T, et al. Design and realization of an airborne LiDAR dual-wedge scanning system [J]. Infrared and Laser Engineering, 2016, 45(5): 0502001. (in Chinese) doi: 10.3788/IRLA201645.0502001 |
[6] |
Guo Y Z, Yang X J, Yang X J, et al. Simulation study of rotating double optical wedge vectoring optics path based on Matlab [J]. Infrared and Laser Engineering, 2014, 43(3): 856-860. (in Chinese) |
[7] |
Zhao J L, Wu Y M, Gao L M. Detecting method of right-angled prism tilting [J]. Infrared and Laser Engineering, 2013, 42(1): 228-232. (in Chinese) |
[8] |
Guo H, Wang J Z, Luo C Z. Influence of prism with large-angle tilt on aiming accuracy [J]. Infrared and Laser Engineering, 2011, 40(1): 138-142. (in Chinese) |
[9] |
Li A H, Sun W S, Yi W L. An overview of inverse solution expressions for Risleyrism-based scanner [C]//SPIE, 2016, 9947: 99470Z. |
[10] |
Zhang E L. Design of the measuring device for the coaxiality of the winding drum of the hoist reducer [J]. Mechanical Engineering, 2021(1): 101100-101104. (in Chinese) |
[11] |
Liu X Y, Liu G D, Cao Y, et al. Control method of axial coaxiality extension error in three- coordinate detection [J]. Mechanical Engineering, 2022(1): 18-20. (in Chinese) doi: 10.3969/j.issn.1002-2333.2022.1.jxgcs202201006 |
[12] |
Ye Z B, Lu Y H, T J, et al. Study on coaxiality measurement system of compound gear shaft based on non-contact optic [J]. Transactions of Nanjing University of Aeronautics and Astronautics, 2021, 38(3): 393-403. (in Chinese) |
[13] |
邹志鸿. 基于激光直线基准与光电检测的孔系同轴度测量[D]. 武汉: 华中科技大学, 2016
Zou Z H. Design of a research platform to measure bore alignment error based on laser calibrate and photoelectric detecting technology [D]. Wuhan: Huazhong University of Science and Technology, 2016. (in Chinese) |
[14] |
李松振. 液晶偏振光栅的设计及其光偏转特性研究[D]. 北京: 中国科学院大学, 2019.
Li Z S. Design of liquid crystal polarization grating and study of its beam deflection characteristics [D]. Beijing: Chinese Academy of Sciences, 2019. (in Chinese) |
[15] |
Zhang L W, Wang W B, Wang R, et al. Precision analysis of Risley prism beam pointing control based on forward solution process [J]. Chinese Optics, 2017, 10(4): 507-153. (in Chinese) doi: 10.3788/co.20171004.0507 |
[16] |
Liu Z, Wang Q D, Wang C, et al. Analysis obeamsteering control precision for Risley prisms based on forward solution [J]. Chinese Optics, 2021, 50(11): 1105003. (in Chinese) |
[17] |
Zhang M X, Guo X H. A Study on Grating Diffraction with Slating Incidence Ray [J]. Journal of Tianshui Normal University, 2006, 26(5): 44-47. (in Chinese) |