[1] Zhao Xianyu. Research on Hartmann principle based on sub-aperture slope scanning detection and error [J]. Infrared and Laser Engineering, 2019, 48(8): 0813003. (in Chinese) doi:  10.3788/IRLA201948.0813003
[2] Xiang Quncui, Yong Hengzhao, Yao Quanchu, et al. The large sky area multi-object fiber spectroscopic telescope(LAMOST) [J]. Research in Astron Astrophys, 2012, 12(9): 1197-1242. doi:  10.1088/1674-4527/12/9/003
[3] Roland GEYL, Jacques PASERI. Optical polishing of the VLT 8.2 m primary mirrors–A report [C]//SPIE, 1996, 2775: 476-479.
[4] 张林超. 大口径平面反射镜检测方法研究[D]. 长春: 中国科学院长春光学精密机械与物理研究所, 2010.
[5] Stefan Schulte, Bernd Dörband, Frank Schilike, et al. Interferometric testing of the VLT tertiary mirrors [C]//SPIE, 1999, 3745: 14-24.
[6] Zhi Ganghan, Lu Lin, Lei Chen, et al. Absolute flatness testing of skip-flat interferometry by matrix analysis in polar coordinates [J]. Applied Optics, 2016, 55(9): 2387-2392. doi:  10.1364/AO.55.002387
[7] An Qichang, Zhang Jingxu, Fei Yang, et al. Ritchey-Common sparse-aperture testing of the giant steerable science mirror [J]. Applied Optics, 2018, 57(27): 7764-7769. doi:  10.1364/AO.57.007764
[8] Wang Xiaokun, Zheng Ligong, Zhang Binzhi, et al. Subaperture stitching interferometry for testing a large hyperboloid [J]. Infrared and Laser Engineering, 2009, 38(1): 114-119. (in Chinese) doi:  10.3969/j.issn.1007-2276.2009.01.026
[9] Guo Fudong, Tang Feng, Lu Yunjun, et al. Rapid adjustment and measurement for subaperture stitching interferometry [J]. Opt. Precision Eng, 2017, 25(10): 2682-07. (in Chinese) doi:  10.3788/OPE.20172510.2682
[10] Wang Xiaokun. Testing of a large rectangular mirror based on sub-aperture stitching method [J]. Chinese Optics Letter, 2015, 13(13): 40-43.
[11] Qi Erhui, Luo Xiao, Li Ming, et al. Error analysis of scanning pentaprism system in optical testing on large aperture flat mirror [J]. Infrared and Laser Engineering, 2015, 44(2): 639-646. (in Chinese) doi:  10.3969/j.issn.1007-2276.2015.02.044
[12] Yan Lisong, Wang Xiaokun, Zheng Ligong, et al. Large-diameter reflector mirror stitching accuracy analysis based on selftest [J]. Infrared and Laser Engineering, 2014, 43(6): 1920-1924. (in Chinese) doi:  10.3969/j.issn.1007-2276.2014.06.040
[13] Wang Xiaokun, Xue Donglin, Zhang Xuejun. Fabrication and testing of large aspheric system based on common reference [J]. Opt Precision Eng, 2018, 26(04): 743-748. (in Chinese) doi:  10.3788/OPE.20182604.0743
[14] Mourad Idir, Konstantine Kaznatcheev, Guillaume Dovillaire, et al. A 2 D high accuracy slope measuring system based on a stitching shack hartmann optical head [J]. Optics Express, 2014, 22(3): 2770-2781. doi:  10.1364/OE.22.002770
[15] Mallik P C V, Chunyu Zhao, Burge J H. Measurement of a 2-meter flat using a pentaprism scanning system [J]. Optical Engineering, 2007, 46(2): 0236021.
[16] Wei H S, Yan F, Chen X D. Large aperture space optical system testing based on scanning hartmann [J]. Appl Opt, 2017, 56(8): 2078-2083. doi:  10.1364/AO.56.002078
[17] Wang Xiaokun. Test convex aspheres by subaperture stitching interferometry [J]. Infrared and Laser Engineering, 2013, 42(3): 716-722. (in Chinese) doi:  10.3969/j.issn.1007-2276.2013.03.044
[18] Wu Jing, Wang Jianli, Lin Xudong. Wave-front test by sub-aperture stitching technique based on Shack-Hartmann wave-front sensor [J]. Opto-Electronic Engineering, 2011, 38(1): 39-43. (in Chinese)
[19] Burada D R, Pant K K , Bichra M, et al. Experimental investigations on characterization of freeform wavefront using Shack-Hartmann sensor [J]. Optical Engineering, 2017, 56(8): 084107.
[20] Hongyan Xu, Hao Xian, Yudong Zhang. Comparison of two stitching algorithms for annular subaperture Hartmann Shack testing method[C]//SPIE, 2010, 7849: 78491Q.
[21] Wang Ruoqiu, Zhang Zhiyu, Xue Donglin, et al. Large-diameter high-efficiency diffractive Fresnel membrane elements for space telescope [J]. Infrared and Laser Engineering, 2017, 46(9): 0920001. (in Chinese) doi:  10.3788/IRLA201746.0920001