[1] 郑亮奎, 郑建明, 李旭波等. 错齿BTA深孔振动钻削刀具系统径向减振特性研究 [J]. 振动与冲击, 2019, 38(14): 96-104.

Zheng Liangkui, Zheng Jianming, Li Xubo, et al. Radial damping characteristics of a drilling tool system in BTA deep-hole vibration drilling [J]. Journal of Vibration and Shock, 2019, 38(14): 96-104. (in Chinese)
[2] 宋慈, 焦黎, 王西彬等. 面向轴孔类零件圆度误差评定的改进式最小区域圆法 [J]. 中国机械工程, 2022, 33(9): 1090-1097.

Song Ci, Jiao Li, Wang Xibin, et al. Improved minimum zone circle method for roundness error evaluation of shaft and hole parts [J]. China Mechanical Engineering, 2022, 33(9): 1090-1097. (in Chinese)
[3] 李超, 申力, 施斐斐. 同轴空心激光检测圆柱内孔圆度误差的方法研究(英文)[J]. 红外与激光工程, 2018, 47(S1):

Li Chao, Shen Li, Shi Feifei. Research on the method of detecting the roundness error of cylindrical inner-hole by using coaxial hollow laser [J]. Infrared and Laser Engineering , 2018, 47(S1): S106001.
[4] 李红民, 郭立杨, 宋冠锋等. 基于电容传感器管道焊缝位置检测方法的研究 [J]. 宇航计测技术, 2018, 38(1): 68-73.

Li Hongmin, Guo Liyang, Song Guanfeng, et al. Research on the detection method of pipeline welding position based on capacitance sensor [J]. Journal of Astronautic Metrology and Measurement, 2018, 38(1): 68-73. (in Chinese)
[5] 梁海波, 王怡. 基于深度学习的天然气钢制管道缺陷检测方法研究 [J]. 电子测量与仪器学报, 2022, 36(9): 148-158.

Liang Haibo, Wangyi. Research on defect detection method of natural gas steel pipeline based on deep learning [J]. Journal of Electronic Measurement and Instrumentation, 2022, 36(9): 148-158. (in Chinese)
[6] 徐伟. 基于光纤传感器的深孔内表面粗糙度测量方法研究[D]. 江苏大学, 2019.

Xu Wei. Research on detection method of inner surface roughness for deep hole based on fiber optical sensor[D]. Zhenjiang: Jiangsu University, 2019. (in Chinese)
[7] 张欣婷, 亢磊, 安志勇等. 改进型激光三角测头设计 [J]. 红外与激光工程, 2018, 47(10): 305-309.

Zhang Xinting, Kang Lei, An Zhiyong, et al. Improved laser triangulation probe design [J]. Infrared and Laser Engineering, 2018, 47(10): 1018002. (in Chinese)
[8] Inari T , Takashima K , Watanabe M, et al. Optical inspection system for the inner surface of a pipe using detection of circular images projected by a laser source[J]. Measurement , 1994, 13(2): 99-106.
[9] Zhuang B H, Zhang W, Cui D Y. Noncontact laser sensor for pipe inner wall inspection [J]. Optical Engineering, 1998, 37(5): 1643-1647. doi:  10.1117/1.601677
[10] Zhang G, He J, Li X. 3D vision inspection for internal surface based on circle structured light[J]. Sensors & Actuators A Physical , 2005, 122(1): 68-75.
[11] Zhu Y, Wang L, Gu Y, et al. Three-dimensional inner surface inspection system based on circle-structured light [J]. J Manuf Sci Eng, 2018, 140(12): 121007. doi:  10.1115/1.4041480
[12] Zhu Y, Wang L, Gu Y, et al. A laser triangulation-based 3D measurement system for inner surface of deep holes [C]//ASME 2018 13th International Manufacturing Science and Engineering Conference, 2018.
[13] 雷贤卿, 畅为航, 薛玉君等. 圆度误差的网格搜索算法 [J]. 仪器仪表学报, 2008(11): 2324-2329.

Lei Xianqing, Chang Weihang, Xue Yujun, et al. Evaluation of roundness error based on mesh search algorithm [J]. Chinese Journal of Scientific Instrument, 2008(11): 2324-2329. (in Chinese)
[14] 孙军华, 张广军, 刘谦哲等. 结构光视觉传感器通用现场标定方法 [J]. 机械工程学报, 2009, 45(3): 174-177. doi:  10.3901/JME.2009.03.174

Sun Junhua, Zhang Guangjun, Liu Qianzhe, et al. Universal method for calibrating structured-light vision sensor on the spot [J]. Journal of Mechanical Engineering, 2009, 45(3): 174-177. (in Chinese) doi:  10.3901/JME.2009.03.174
[15] Yang Mingming, Wu Haibin, Chen Xinbing. Improved center strip extraction algorithm based on Steger algorithm [C]//3rd International Conference on Laser, Optics, and Optoelectronic Technology (LOPET 2023), SPIE, 2023, 12757: 366-370.