[1] Xu Shuyan, Zhang Xusheng, Fan Kuo, et al. Suppression of airflow turbulence in wavefront measurement for large-aperture optical systems [J]. Optics and Precision Engineering, 2020, 28(1): 80-89. (in Chinese) doi:  10.3788/OPE.20202801.0080
[2] Jiang Zibo, Li Xinnan, Ji Bo. Influence analysis of testing accuracy for long focal length mirror by vertical temperature gradient of air [J]. Acta Optica Sinica, 2015, 35(10): 142-147. (in Chinese)
[3] 陈华. 高精度面形检测中环境扰动因素分析[D]. 长春: 中国科学院研究生院(长春光学精密机械与物理研究所), 2011: 50-70

Chen Hua. Analysis of environmental disturbance effects on high precision figure measurements[D]. Changchun: Graduate University of Chinese Academy of Sciences (Changchun Institute of Optics, Fine Mechanics and Physics Chinese Academy of Sciences), 2011: 50-70. (in Chinese)
[4] 杨振. 湍流中光束漂移引起光测成像畸变的分析及其修正[D]. 长沙: 国防科学技术大学, 2013: 23-31

Yang zhen. Analysis and modification on Imaging aberration caused by light oscillation in turbulence[D]. Changsha: National University of Defense Technology, 2013: 23-31. (in Chinese)
[5] 杨影. 点光源异位式动态斐索干涉仪研究[D]. 南京: 南京理工大学, 2018: 36-54

Yang Ying. Research on dynamic fizeau interferometer based on lateral displacements of the point sources[D]. Nanjing: Nanjing University of Science & Technology, 2018: 36-54. (in Chinese)
[6] 毛洁. 高精度曲率半径干涉测量技术研究[D]. 成都: 中国科学院研究生院(光电技术研究所), 2015: 29-51

Mao Jie. Study on techniques of high-accuracy radius interferometric measurement[D]. Chengdu: Graduate University of Chinese Academy of Sciences (Institute of Optics and Electronics), 2015: 29-51. (in Chinese)
[7] Wang Fengpu, Li Xinnan, Xu Chen, et al. Optical testing path design for LOT aspheric segmented mirrors with reflective-diffractive compensation [J]. Chinese Optics, 2021, 14(5): 1184-1193. (in Chinese)
[8] Xu Jianghai, Gong Xuefei. Study of wind load on four astronomical enclosures based on numerical wind tunnel experiments [J]. Acta Optica Sinica, 2015, 35(5): 45-55. (in Chinese)
[9] 陶文铨. 数值传热学[M]. 西安: 西安交通大学出版社, 2001: 34-42

Tao Wenquan. Heat Transfer[M]. Xi'an: Xian Jiaotong University Press, 2001: 34-42. (in Chinese)
[10] Chen Baohua, Wu Quanying, Tang Yunhai, et al. Processing method of large off-axis aspheric mirror [J]. Optics and Precision Engineering, 2021, 29(5): 1095-1102. (in Chinese) doi:  10.37188/OPE.20212905.1095
[11] He Jianguo, Li Ming, Mo Zeqiang, et al. Longitudinal forced convection heat transfer for high power slab laser media [J]. Infrared and Laser Engineering, 2020, 49(9): 20200556. (in Chinese)
[12] Wang Jing, Wei Liang, Xiang Wenhao, et al. High-precision camera calibration method considering projected circular edge blur and eccentricity error [J]. Infrared and Laser Engineering, 2021, 50(12): 20210130. (in Chinese)
[13] Shao Hongyu, Li Yingchao, Wang Chao, et al. Aberration effect and optimization design of super-resolution telescope optical system [J]. Chinese Optics, 2020, 13(1): 106-120. (in Chinese) doi:  10.3788/co.20201301.0106