[1] |
Bu W H, Xia Z L, Zhao Z G, et al. Development of lntegrated circuit lndustrial technologies in the post-moore era [J]. Science and Technology Fore-sight, 2022, 1(3): 20-41. |
[2] |
Yazgi S G, Ivanov T, Holz M, et al. Line edge roughness metrology software [J]. Journal of Vacuum Science & Technology B, 2020, 38(1): 012602. |
[3] |
Neisser M. International roadmap for devices and systems lithography roadmap [J]. Journal of Micro/Nanopatterning, Materials, and Metrology, 2021, 20(4): 044601. |
[4] |
Gao S T. Study on measurement atomic force microscope (AFM)[D]. Tianjin: Tianjin University, 2007. (in Chinese) |
[5] |
Anold H W, 沈建波. 亚微米光刻的线宽测量技术[J]. 微电子技术, 1995, 23(6): 90-97. |
[6] |
Papavieros G, Constantoudis V. Line edge roughness measurement through SEM images: effects of image digitization and their mitigation[C]//SPIE, 2017, 10446: 104-114. |
[7] |
Misumi I, Kumagai K, Kizu R. Pitch calibration of standard nanoscale for uncertainty reduction of certified reference materials for SEM image sharpness evaluation and magnification calibration [J]. Surface Topography: Metrology and Properties, 2022, 10(4): 044010. doi: 10.1088/2051-672X/acab1c |
[8] |
Deng X, Li T B, Cheng X B. Self-traceable grating reference material and application [J]. Optics and Precision Engineering, 2022, 30(21): 2608-2625. (in Chinese) doi: 10.37188/OPE.20223021.2608 |
[9] |
Zhao L, Han G Z, Zhang X D, et al. Tracking type line width standard sample based on multilayer film deposition [J]. Acta Metrologica Sinica, 2022, 43(12): 1549-1553. (in Chinese) |
[10] |
Wu Ziruo, Cai Yanni, Wang Xingrui, et al. Investigation of AFM tip characterization based on multilayer gratings [J]. Infrared and Laser Engineering, 2020, 49(2): 0213001. (in Chinese) |
[11] |
Jiang Z D, Wang C Y, Yang S M. Preparation and typical measurement and characterization of nanostructures [J]. Strategic Study of CAE, 2013, 15(1): 15-20. |
[12] |
Dai G L, Koenders L, Fluegge J, et al. Two approaches for realizing traceability in nanoscale dimensional metrology [J]. Optical Engineering, 2016, 55(9): 091407. doi: 10.1117/1.OE.55.9.091407 |
[13] |
葛广路, 吴晓春, 赵蕊. 纳米标准样品国内外研究进展[J]. 中国标准化, 2007(9): 10-13. doi: 10.3969/j.issn.1002-5944.2007.09.004 |
[14] |
Tortonese M, Prochazka J, Konicek P, et al. 100-nm-pitch standard characterization for metrology applications[C]//Metrology, Inspection, and Process Control for Microlithography XVI, SPIE, 2002, 4689: 558-564. |
[15] |
Zhou J X, Chen Z Y. Study on three micron-level grids pattern verified reference material used formagnification calibration of SEM [J]. Journal of Chinese Electron Microscopy Society, 2005(3): 185-191. (in Chinese) |
[16] |
周剑雄, 陈振宇. 微米-亚微米级扫描电镜图像放大倍率校准标样的研制报告[J]. 电子显微学报, 2006(S1): 149-150. |
[17] |
Mcclelland J J, Scholten R E, Palm E C, et al. Laser-focused atomic deposition [J]. Science, 1993, 262(5135): 877-880. doi: 10.1126/science.262.5135.877 |
[18] |
Deng X, Li T B, Lei L H, et al. Fabrication and measurement of traceable pitch standard with a big area at trans-scale [J]. Chinese Physics B, 2014, 23(9): 147-151. |
[19] |
JJF 1916—2021扫描电子显微镜校准规范[S]. 北京: 中国标准出版社, 2021. |
[20] |
Zhang Qiang. Research on ler effect of line width measurement on nano-scale[D]. Harbin: Harbin Institute of Technology, 2016. (in Chinese) |
[21] |
Li Ning. Research on measurement and characterization method of nano-scale semiconductor line roughness[D]. Harbin: Harbin Institute of Technology, 2010. (in Chinese) |
[22] |
Leunissen L H A, Lawrence W G, Ercken M. Line edge roughness: Experimental results related to a two-parameter model [J]. Microelectronic Engineering, 2004, 73: 265-270. |
[23] |
Zhao X Z, Li N, Zhou F Q, et al. Influence factors of line edge roughness measured by AFM [J]. Optics and Precision Engineering, 2009, 17(4): 839-848. (in Chinese) |