[1] Hu Liang, Duan Fajie, Ding Keqin, et al. Study on in-line surface defect detection system for steel strip based on linear CCD sensor [J]. Acta Metrologica Sinica, 2005, 26(3): 200-203. (in Chinese) doi:  10.3321/j.issn:1000-1158.2005.03.002
[2] Chen Changlong, Di Chengliang, Tang Xiaoping, et al. High-speed focusing technique for lithography based on line scan CCD [J]. Infrared and Laser Engineering, 2015, 44(8): 2389-2394. (in Chinese) doi:  10.3969/j.issn.1007-2276.2015.08.025
[3] Yu Hai, Wan Qiuhua, Sun Ying, et al. A high precision image angular displacement measurement device with self-adaptive installation [J]. Chinese Optics, 2020, 13(3): 510-516. (in Chinese)
[4] Zhao Jiawang, Zhang Yunhai, Wang Famin, et al. Line-scanning confocal microscopic imaging based on virtual structured modulation [J]. Chinese Optics, 2021, 14(2): 431-445. doi:  10.37188/CO.2020-0120
[5] Wu Guodong, Han Bing, He Xu. Calibration of geometric parameters of line-array CCD camera based on exact measuring angle in lab [J]. Optics and Precision Engineering, 2007, 15(10): 1628-1632. (in Chinese) doi:  10.3321/j.issn:1004-924x.2007.10.028
[6] Wang Lan, Sun Bo, Long Changyu, et al. A novel method for calibrating intrinsic parameters of linear array cameras based on collinear feature points [J]. Infrared and Laser Engineering, 2015, 44(6): 1878-1883. (in Chinese) doi:  10.3969/j.issn.1007-2276.2015.06.037
[7] Yuan Guoqin, Zheng Lina, Zhang Hongwen, et al. Multi-dimensional high-precision calibration method for line-scan camera [J]. Optics and Precision Engineering, 2019, 27(8): 1901-1907. (in Chinese) doi:  10.3788/OPE.20192708.1901
[8] Horaud R, Mohr R, Lorecki B. On single-scanline camera calibration [J]. IEEE Transactions on Robotics and Automation, 1993, 9(1): 71-75. doi:  10.1109/70.210796
[9] Li Y S, Young T Y, Huang C C. Noncontact measurement using line-scan cameras: Analysis of positioning error [J]. IEEE Transactions on Industrial Electronics, 1989, 36(4): 545-551. doi:  10.1109/41.43014
[10] Luna C A, Mazo M, Lázaro J L, et al. Calibration of line-scan cameras [J]. IEEE Transactions on Instrumentation and Measurement, 2009, 59(8): 2185-2190.
[11] Wang Guohui, Qian Kemao. Review on line-scan camera calibration methods [J]. Acta Optica Sinaca, 2020, 40(1): 0111011. (in Chinese)
[12] Denavit J, Hartenberg R S. A kinematic notation for lower-pair mechanisms based on matrices [J]. Journal of Applied Mechanics, 1955, 22(2): 215-221. doi:  10.1115/1.4011045
[13] Ferreira P M, Liu C R, Merchant E. A contribution to the analysis and compensation of the geometric error of a machining center [J]. CIRP Annals, 1986, 35(1): 259-262. doi:  10.1016/S0007-8506(07)61883-6
[14] Zhong G, Wang C, Yang S, et al. Position geometric error modeling, identification and compensation for large 5-axis machining center prototype [J]. International Journal of Machine Tools and Manufacture, 2015, 89: 142-150. doi:  10.1016/j.ijmachtools.2014.10.009
[15] Liu Youwu, Zhao Libing, Zhao Xiaosong, et al. Investigation of error compensation technology for NC machine tool [J]. China Mechanical Engineering, 1998, 9(12): 4852-4852. (in Chinese) doi:  10.3321/j.issn:1004-132X.1998.12.015
[16] Zhao Zhuang, Lou Zhifeng, Zhang Zhongning, et al. Geometric error model of CNC machine tools based on Abbe principle [J]. Optics and Precision Engineering, 2020, 28(4): 885-897. (in Chinese)
[17] Wang Wenpan, Zhao Yongzhi, Cao Yuyan, et al. Error modeling and analysis of photo-electricity telescope based on multi-system theory [J]. Infrared and Laser Engineering, 2016, 45(8): 0817001. (in Chinese) doi:  110.3788/IRLA201645.0817001
[18] Tong Pengfei, Yue Yi, Wei Baochen, et al. Geometric error modelling of three-axis turntable and sensitivity analysis based on multi-system theory [J]. Machine Design & Research, 2020, 36(4): 108-112,117. (in Chinese)
[19] Li Hui, Fan Hongjie, Chen Qianrong, et al. Modeling, test and correction of static pointing error for remotion platform [J]. Infrared and Laser Engineering, 2021, 50(12): 20210161. (in Chinese) doi:  10.3788/IRLA20210161
[20] Fang S, Xia X, Xiao Y. A calibration method of lens distortion for line scan cameras [J]. Optik, 2013, 124(24): 6749-6751. doi:  10.1016/j.ijleo.2013.05.084