留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于遗传算法的光纤光栅交叉敏感解调研究

刘超明 娄淑琴

刘超明, 娄淑琴. 基于遗传算法的光纤光栅交叉敏感解调研究[J]. 红外与激光工程, 2015, 44(6): 1859-1864.
引用本文: 刘超明, 娄淑琴. 基于遗传算法的光纤光栅交叉敏感解调研究[J]. 红外与激光工程, 2015, 44(6): 1859-1864.
Liu Chaoming, Lou Shuqin. Application of the genetic algorithm in the demodulation of the FBG cross-sensitivity characteristics[J]. Infrared and Laser Engineering, 2015, 44(6): 1859-1864.
Citation: Liu Chaoming, Lou Shuqin. Application of the genetic algorithm in the demodulation of the FBG cross-sensitivity characteristics[J]. Infrared and Laser Engineering, 2015, 44(6): 1859-1864.

基于遗传算法的光纤光栅交叉敏感解调研究

基金项目: 

国家自然科学基金(61177082);北京市自然科学基金(4122063)

详细信息
    作者简介:

    刘超明(1989-),男,硕士生,主要从事光纤传感方面的研究。Email:12120107@bjtu.edu.cn

  • 中图分类号: TP212.1

Application of the genetic algorithm in the demodulation of the FBG cross-sensitivity characteristics

  • 摘要: 光纤光栅在现代传感领域应用广泛,但交叉敏感特性严重制约了其发展。针对光纤光栅在传感领域应用中存在温度与应力交叉敏感的问题,提出了一种基于遗传算法的解调方案,建立了遗传算法的快速解调模型,经过数学分析得到遗传算法目标方程、适应度函数,系统讨论了参考光纤光栅与传感光栅的反射中心波长不同、反射峰值不同情况下的解调结果。数值研究结果表明,提出的基于遗传算法的解调方案可以有效地解调出参考光纤光栅与传感光栅参数不同情况下的温度与应变变化,有效地区分出温度与应力的影响,温度检测精度为0.1 ℃,应力检测精度为1.5 。打破了传统参考光纤光栅法要求传感光栅与参考光栅一致的要求,降低了系统的组建难度。
  • [1] Zhao Yong, Liao Yanbiao. Discrimination methods and demodulation techniques for fiber Bragg grating sensors[J]. Optics and Lasers in Engineering, 2004, 41(1): 1-18.
    [2]
    [3] Ni Xiaohong, Gui Feifei, Wang Yutian, et al. Simultaneous measurement of temperature and strain using fiber grating[J]. Infrared and Laser Engineering, 2011, 40(7): 724-728. (in Chinese) 倪晓红, 桂菲菲, 王玉田, 等. 温度应变双参量同时测量的光纤传感技术研究[J]. 红外与激光工程, 2011, 40(7): 724-728.
    [4]
    [5]
    [6] Samer K, Abi Kaed Bey, Sun Tong, et al. Simultaneous measurement of temperature and strain with long period grating pairs using low resolution detection[J]. Sensors and Actuators A, 2008, 144: 83-89.
    [7]
    [8] Cheng H C, Huang J F, Luo Y L. Simultaneous strain and temperature distribution sensing using two fiber Bragg grating pairs and a genetic algorithm[J]. Optical Fiber Technology, 2006, 12(4): 340-349.
    [9]
    [10] Song Yun, Zhu Tao, Rao Yunjiang, et al. Simultaneous measurement of strain and temperature using a long-period fiber grating with rotary refractive index modulation[J].Chinese Journal of Lasers, 2009, 36(5): 1129-1133. (in Chinese) 宋韵, 朱涛, 饶云江, 等. 旋转折变型长周期光纤光栅实现应变和温度的同时测量[J]. 中国激光, 2009, 36(5): 1129-1133.
    [11] Hu Xingliu, Liang Dakai, Lu Guan, et al. Simultaneous discriminating measurement of temperature and strain based on a long period grating's spectrum[J]. Spectroscopy and Spectral Analysis, 2010, 30(3): 851-854. (in Chinese) 胡兴柳, 梁大开, 陆观, 等. 基于单长周期光纤光栅光谱特性的温度和应变同时区分测量[J]. 光谱学与光谱分析, 2010, 30(3): 851-854.
    [12]
    [13]
    [14] Song D, Chai Q, Liu Y, et al. A simultaneous strain and temperature sensing module based on FBG-in-SMS[J]. Measurement Science and Technology, 2014, 25(5): 5205.
    [15]
    [16] Triollet S, Robert L, Marin E, et al. Discriminated measures of strain and temperature in metallic specimen with embedded superimposed long and short fibre Bragg gratings[J]. Measurement Science and Technology, 2011, 22(1): 015202.
    [17]
    [18] Wang Qiang, Shen Guotu, Yang Baocheng, et al. Application of genetic algorithm in the design optimization of grating profile[J]. Infrared and Laser Engineering, 2005, 34(4): 410-414. (in Chinese) 王强, 沈国土, 杨宝成, 等. 遗传算法在光栅面形优化设计中的应用[J]. 红外与激光工程, 2005, 34(4): 410-414.
    [19] Zhou Xuan, Li Zhanchao, Dai Zong, et al. QSAR modeling of peptide biological activity by coupling support vector machine with particle swarm optimization algorithm and genetic algorithm[J]. Journal of Molecular Graphics and Modelling, 2010, 29(2): 188-196.
    [20]
    [21] Chang Xinlong, Li Ming, Han Xuanzi, et al. Application of polymer optical fiber Bragg grating in large strain measurement of solid rocket motor[J]. Infrared and Laser Engineering, 2009, 38(5): 834-839. (in Chinese) 常新龙, 李明, 韩玄子, 等. 聚合物光纤布拉格光栅在固体火箭发动机大应变测量中的应用[J]. 红外与激光工程, 2009, 38(5): 834-839.
    [22]
    [23] Teng Fengcheng, Yin Wenwen, Wu Fei, et al. Application of genetic algorithm in quasi-static fiber grating wavelength demodulation technology[J]. Optoelectronics Letters, 2007, 3(4): 271-274.
    [24]
    [25] Zhang Xiaoli, Liang Dakai, Zeng Jie, et al. Genetic algorithm-support vector regression for high reliability SHM system based on FBG sensor network[J]. Optics and Lasers in Engineering, 2012, 50(2): 148-153.
  • [1] 刘瀚霖, 辛璟焘, 庄炜, 夏嘉斌, 祝连庆.  基于卷积神经网络的混叠光谱解调方法 . 红外与激光工程, 2022, 51(5): 20210419-1-20210419-9. doi: 10.3788/IRLA20210419
    [2] 沈华, 朱日宏, 卞殷旭.  光纤光栅在高功率连续光纤激光器中的发展及展望 . 红外与激光工程, 2022, 51(2): 20210908-1-20210908-14. doi: 10.3788/IRLA20210908
    [3] 赵霖, 王爱民, 王崑声, 于成龙.  基于改进遗传算法的虚拟制造单元继承性重构调度技术 . 红外与激光工程, 2022, 51(11): 20220510-1-20220510-10. doi: 10.3788/IRLA20220510
    [4] 汤晨, 何彦霖, 祝连庆, 孙广开.  基于光纤光栅的软体机器人末端力测量方法研究 . 红外与激光工程, 2021, 50(7): 20200386-1-20200386-9. doi: 10.3788/IRLA20200386
    [5] 刘炳锋, 董明利, 孙广开, 何彦霖, 祝连庆.  浮空器柔性复合蒙皮形变光纤布拉格光栅传感器应变传递特性 . 红外与激光工程, 2021, 50(5): 20200315-1-20200315-9. doi: 10.3788/IRLA20200315
    [6] 刘云朋, 霍晓丽, 刘智超.  基于深度学习的光纤网络异常数据检测算法 . 红外与激光工程, 2021, 50(6): 20210029-1-20210029-6. doi: 10.3788/IRLA20210029
    [7] 谢俊峰, 杨晨晨, 梅永康, 韩保民.  基于遗传算法的星载激光全波形分解 . 红外与激光工程, 2020, 49(11): 20200245-1-20200245-7. doi: 10.3788/IRLA20200245
    [8] 汪子君, 邱俨睿, 杨宏霄, 孙磊.  基于鲁棒Otsu的红外无损检测缺陷分割算法 . 红外与激光工程, 2019, 48(2): 204004-0204004(9). doi: 10.3788/IRLA201948.0204004
    [9] 慈明儒, 刘京郊, 韩龙, 刘金生, 娄岩.  光纤激光相控阵阵元分布优化方法 . 红外与激光工程, 2019, 48(7): 706007-0706007(7). doi: 10.3788/IRLA201948.0706007
    [10] 张景川, 张雯, 杨晓宁, 裴一飞.  真空热环境下不同涂覆层光纤传输损耗特性影响研究 . 红外与激光工程, 2019, 48(11): 1118002-1118002(8). doi: 10.3788/IRLA201948.1118002
    [11] 李振, 王纪强, 赵林, 张华文, 刘统玉.  基于差压原理的矿用光纤光栅风速传感器 . 红外与激光工程, 2018, 47(4): 422002-0422002(6). doi: 10.3788/IRLA201847.0422002
    [12] 孙国栋, 秦来安, 程知, 何枫, 侯再红.  成像激光雷达测量大气能见度实验研究 . 红外与激光工程, 2017, 46(10): 1030003-1030003(9). doi: 10.3788/IRLA201766.1030003
    [13] 季淑英, 孔伟金, 李娜, 车卫康, 司维, 徐志恒.  800 nm亚波长夹层式金属偏振分束光栅 . 红外与激光工程, 2017, 46(8): 820002-0820002(6). doi: 10.3788/IRLA201746.0820002
    [14] 贾文抖, 范春利, 孙丰瑞, 杨立.  基于红外测温的内部点热源的识别 . 红外与激光工程, 2015, 44(3): 837-844.
    [15] 李艳辉, 厉明, 周凌, 张楠.  基于模型匹配的光电侦察无人机飞行控制器设计方法 . 红外与激光工程, 2015, 44(2): 693-698.
    [16] 周倩, 宁提纲, 温晓东, 李超.  一种双包层半径光纤布拉格光栅传感器 . 红外与激光工程, 2015, 44(3): 1024-1027.
    [17] 劳达宝, 周维虎, 李万红, 石冬, 林心龙.  基于遗传算法的柱面光栅测角技术研究 . 红外与激光工程, 2015, 44(7): 2182-2188.
    [18] 毛海岑, 刘爱东, 王亮.  采用混合粒子群算法的星图识别方法 . 红外与激光工程, 2014, 43(11): 3762-3766.
    [19] 韩军, 常波, 路邵军, 吴玲玲, 占春连.  SVM 的光栅成像光谱仪图像畸变校准方法 . 红外与激光工程, 2014, 43(9): 3099-3104.
    [20] 蔡义, 汪红熳, 亓波.  星地激光通信无波前传感器优化算法仿真分析 . 红外与激光工程, 2013, 42(4): 1063-1068.
  • 加载中
计量
  • 文章访问数:  345
  • HTML全文浏览量:  50
  • PDF下载量:  161
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-10-05
  • 修回日期:  2014-11-20
  • 刊出日期:  2015-06-25

基于遗传算法的光纤光栅交叉敏感解调研究

    作者简介:

    刘超明(1989-),男,硕士生,主要从事光纤传感方面的研究。Email:12120107@bjtu.edu.cn

基金项目:

国家自然科学基金(61177082);北京市自然科学基金(4122063)

  • 中图分类号: TP212.1

摘要: 光纤光栅在现代传感领域应用广泛,但交叉敏感特性严重制约了其发展。针对光纤光栅在传感领域应用中存在温度与应力交叉敏感的问题,提出了一种基于遗传算法的解调方案,建立了遗传算法的快速解调模型,经过数学分析得到遗传算法目标方程、适应度函数,系统讨论了参考光纤光栅与传感光栅的反射中心波长不同、反射峰值不同情况下的解调结果。数值研究结果表明,提出的基于遗传算法的解调方案可以有效地解调出参考光纤光栅与传感光栅参数不同情况下的温度与应变变化,有效地区分出温度与应力的影响,温度检测精度为0.1 ℃,应力检测精度为1.5 。打破了传统参考光纤光栅法要求传感光栅与参考光栅一致的要求,降低了系统的组建难度。

English Abstract

参考文献 (25)

目录

    /

    返回文章
    返回