留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

大气与环境影响分析的红外比色测温方法

吕游 杨波 魏仲慧 何昕 常松涛 孙志远

吕游, 杨波, 魏仲慧, 何昕, 常松涛, 孙志远. 大气与环境影响分析的红外比色测温方法[J]. 红外与激光工程, 2015, 44(8): 2309-2314.
引用本文: 吕游, 杨波, 魏仲慧, 何昕, 常松涛, 孙志远. 大气与环境影响分析的红外比色测温方法[J]. 红外与激光工程, 2015, 44(8): 2309-2314.
Lv You, Yang Bo, Wei Zhonghui, He Xin, Chang Songtao, Sun Zhiyuan. Middle infrared colorimetric temperature measurement method considered influence of atmosphere and ambient[J]. Infrared and Laser Engineering, 2015, 44(8): 2309-2314.
Citation: Lv You, Yang Bo, Wei Zhonghui, He Xin, Chang Songtao, Sun Zhiyuan. Middle infrared colorimetric temperature measurement method considered influence of atmosphere and ambient[J]. Infrared and Laser Engineering, 2015, 44(8): 2309-2314.

大气与环境影响分析的红外比色测温方法

基金项目: 

国家863计划(2012AA121502)

详细信息
    作者简介:

    吕游(1988-),男,博士生,主要从事数字图像处理、红外辐射特性测量方面的研究。Email:lvyou8863@163.com

  • 中图分类号: TP732.2

Middle infrared colorimetric temperature measurement method considered influence of atmosphere and ambient

  • 摘要: 传统的比色测温法通常利用可见光和近红外波段,对距离较近的高温目标具有较高的测量精度,而对距离较远的中低温目标无法精确测量。针对传统比色方法适用局限性,提出考虑大气和环境影响的红外比色测温方法,建立基于中波红外相机的比色测温实验系统。首先使用标准黑体进行中波红外相机和比色系统单波段定标;然后推导加入环境辐射参数的比色测量模型,进而建立新的目标辐射亮度比值与目标温度间的函数关系;最后,进行了实验室内自制灰体目标温度测量实验,验证了提出方法的可行性。实验表明:在实验温度范围内,温度绝对误差和相对误差分别小于4 ℃和6.7%,目标辐射亮度测量精度高于10%,考虑大气与环境影响的比色测温方法可实现中低温目标温度精确测量。
  • [1]
    [2] Feng Chi, Zhang Chongguan, Wang Zhaofeng, et al. The wavelength selection of colorimetric temperature measurement [J]. Applied Science and Technology, 2013, 40(3): 45-49.
    [3] Shahla Keyvan,Rodney Rossow, Carlos Romero. Blackbody-based calibration for temperature calculations in the visible and near-IR spectral ranges using a spectrometer[J]. FUEL,2006, 85: 796-802.
    [4]
    [5]
    [6] Li Jun, Liu Meidong, Zen Yike, et al. Research on non-contact infrared temperature measurement [J]. Piezoelectrics Acousto Optics, 2001, 23(3): 202-205.
    [7] Shi Deheng,Dai Qirun, Chen Yuke, et al. Optimal design of a practical dual-wavelength high-precision fiber-optic colorimeter [J]. Chinese Journal of Scientific Instrument, 2005, 26(12): 1238-1243.
    [8]
    [9] Si Yang. Research of dual-wavelength temperature measurement method based on color image sensor[D]. Xi'an: North University of China, 2013. (in Chinese)
    [10]
    [11] Wu Haibin, Wang Peng, Zhou Houwei, et al. Influence of furnace environment radiation on colorimetry temperature measurement [J]. Chinese Journal of Quantum Electronics, 2012, 29(2): 224-229. (in Chinese)
    [12]
    [13] Sun Yuan, Peng Xiaoqi, Tang Ying. Revised method of temperature measurements using two-color thermometry based on CCD image sensor [J]. Chinese Journal of Scientific Instrument, 2008, 29(1): 49-54.
    [14]
    [15] Zhu Jianhua. Transient high-temperature measurement based on colorimetric temperature measurement technology for high-energy damage blast field [D]. Xi'an: North University of China, 2011.
    [16]
    [17] Carlos Romero, Xianchang Li, Shahla Keyvan. Spectrometer-based combustion monitoring for flame stoichiometry and temperature control [J]. Applied Thermal Engineering, 2005, 25: 659-676.
    [18]
    [19] Feng Wenjing. Research on intermediate infrared colorimetric pyrometry system[D]. Harbin: Harbin Institute of Technology, 2013. (in Chinese)
    [20]
    [21]
    [22] Cao Lihua. Correction-based dual-waveband color comparison thermometric method [J]. Chinese Journal of Scientific Instrument, 2012, 33(8): 1882-1888. (in Chinese)
    [23]
    [24] Xing Jichuan, Liu Guangrong, Jin Weiqi, et al. Dual waveband colorimetric temperature measurement method and analysis [J]. Infrared Technology, 2013, 23(1): 71-75. (in Chinese)
    [25]
    [26] Ren Y, Zhou X M. Survey of dual waveband colorimetric temperature measurement technology[C]//2014 26th Chinese Control and Decision Conference(CCDC), 2014: 5177-5181.
    [27]
    [28] Li Yunhong,Ma Rong, Zhang Heng, et al. Dual waveband colori-metric temperature accurate measurement tecnhology [J]. Infrared and Laser Engineering, 2015, 44(1): 27-35. (in Chinese)
    [29]
    [30] Sun Zhiyuan, Chang Songtao, Zhu Wei. Radiation calibration method for infrared system with large aperture and broad dynamic range[J]. Acta Opticsa Sinica, 2013, 23(1): 0712006-1-0712006-7. (in Chinese)
    [31] Luo Maojie, Zhou Jinmei, Fu Jingneng, et al. Integration time as variable for radiometric calibration of infrared system [J]. Infrared and Laser Engineering, 2013, 42(1): 36-40. (in Chinese)
    [32]
    [33] Han Qijin, Zhang Xuewen, Qiao Zhiyuan, et al. Wide dynamic radiometric calibration of GF-1 PMS sensors using multi-test sites[J]. Infrared and Laser Engineering, 2015, 44(1): 127-133. (in Chinese)
    [34]
    [35] Sun Zhiyuan, Chang Songtao, Zhu Wei, et al. Radiation calibration of infrared system by amendment of inner and outer calibrations [J]. Optics and Precision Engineering, 2015, 23(2): 356-362. (in Chinese)
  • [1] 石卫波, 孙海浩, 刘纯胜, 梁世昌, 石安华.  上升段气动加热对飞行中段高速飞行器红外辐射特性影响分析 . 红外与激光工程, 2023, 52(12): 20230260-1-20230260-8. doi: 10.3788/IRLA20230260
    [2] 郑雪飞, 李春, 范晓彦, 元光, 栾晓宁, 姚子庆, 李凯.  温度和浊度对罗丹明B示踪检测的影响及校正 . 红外与激光工程, 2022, 51(12): 20220243-1-20220243-8. doi: 10.3788/IRLA20220243
    [3] 吕相银, 陈宗胜, 李志刚, 时家明.  环境辐射对热像仪测温的影响 . 红外与激光工程, 2022, 51(3): 20210159-1-20210159-7. doi: 10.3788/IRLA20210159
    [4] 乌日娜, 宋云鹤, 卢佳琦, 高芮, 李业秋, 岱钦.  光子晶体光纤载体中液晶随机激光辐射行为 . 红外与激光工程, 2021, 50(4): 20200171-1-20200171-6. doi: 10.3788/IRLA20200171
    [5] 李颖锐, 吴森, 郭玉, 席守智, 符旭, 查钢强, 介万奇.  温度对碲锌镉光子计数探测器计数性能的影响及机理研究 . 红外与激光工程, 2019, 48(10): 1016001-1016001(6). doi: 10.3788/IRLA201948.1016001
    [6] 宋俊玲, 饶伟, 王广宇, 辛明原.  燃烧流场温度二维重建多吸收谱线重建方法 . 红外与激光工程, 2019, 48(3): 306004-0306004(7). doi: 10.3788/IRLA201948.0306004
    [7] 谢衍新, 吴小成, 胡雄, 杨钧烽, 肖存英.  临近空间全球温度场三维变分同化 . 红外与激光工程, 2017, 46(8): 804005-0804005(6). doi: 10.3788/IRLA201746.0804005
    [8] 黄章斌, 李晓霞, 郭宇翔, 马德跃, 赵亮.  长航时UAV蒙皮红外辐射强度的工程计算 . 红外与激光工程, 2017, 46(3): 304001-0304001(7). doi: 10.3788/IRLA201746.0304001
    [9] 杨远洪, 刘硕, 陆林, 靳伟.  基于保偏光子晶体光纤Sagnac干涉仪的温度不敏感压力传感技术 . 红外与激光工程, 2016, 45(8): 802002-0802002(6). doi: 10.3788/IRLA201645.0802002
    [10] 马秀荣, 王夏洋.  低温条件下光学厚度对Tm3+:YAG 材料光谱烧孔孔深的影响 . 红外与激光工程, 2015, 44(3): 964-968.
    [11] 武阿妮, 李晨毓, 周庆莉, 刘建丰, 孙会娟, 杨舟, 张存林.  温度对太赫兹亚波长金属结构共振特性的影响 . 红外与激光工程, 2015, 44(6): 1832-1835.
    [12] 李云红, 马蓉, 张恒, 曹浏, 霍可, 赵强.  双波段比色精确测温技术 . 红外与激光工程, 2015, 44(1): 27-35.
    [13] 雷景丽, 晏祖勇, 李晓晓, 刘延君, 武刚, 侯尚林.  近零超平坦色散填充光子晶体光纤的温度特性 . 红外与激光工程, 2015, 44(12): 3740-3743.
    [14] 孙美, 许毅, 陈艳虹, 昂秦, 李燕.  被动式FTIR光谱测试固体推进剂羽流红外辐射特性 . 红外与激光工程, 2015, 44(S1): 17-22.
    [15] 李晶, 王巍, 王学锋, 杨学礼.  光子晶体光纤陀螺标度因数特性研究 . 红外与激光工程, 2014, 43(12): 4082-4087.
    [16] 孟恒辉, 耿利寅, 李国强.  激光通信器热设计与热试验 . 红外与激光工程, 2014, 43(7): 2295-2299.
    [17] 吕相银, 金伟, 杨莉.  地面目标红外立体特征 . 红外与激光工程, 2014, 43(9): 2810-2814.
    [18] 李强, 黄泽铗, 徐雅芹, 张凌云, 史骥, 王智.  基于单模-多模-单模光纤模间干涉的传感系统 . 红外与激光工程, 2014, 43(5): 1630-1636.
    [19] 于为雄, 戴景民, 王勇.  基于比色测温原理的动态辐射扫描测温仪研制 . 红外与激光工程, 2014, 43(5): 1390-1395.
    [20] 冯云松, 路远, 凌永顺.  发射率对飞机蒙皮温度及红外辐射特性的影响 . 红外与激光工程, 2013, 42(2): 294-299.
  • 加载中
计量
  • 文章访问数:  383
  • HTML全文浏览量:  53
  • PDF下载量:  176
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-12-08
  • 修回日期:  2015-01-13
  • 刊出日期:  2015-08-25

大气与环境影响分析的红外比色测温方法

    作者简介:

    吕游(1988-),男,博士生,主要从事数字图像处理、红外辐射特性测量方面的研究。Email:lvyou8863@163.com

基金项目:

国家863计划(2012AA121502)

  • 中图分类号: TP732.2

摘要: 传统的比色测温法通常利用可见光和近红外波段,对距离较近的高温目标具有较高的测量精度,而对距离较远的中低温目标无法精确测量。针对传统比色方法适用局限性,提出考虑大气和环境影响的红外比色测温方法,建立基于中波红外相机的比色测温实验系统。首先使用标准黑体进行中波红外相机和比色系统单波段定标;然后推导加入环境辐射参数的比色测量模型,进而建立新的目标辐射亮度比值与目标温度间的函数关系;最后,进行了实验室内自制灰体目标温度测量实验,验证了提出方法的可行性。实验表明:在实验温度范围内,温度绝对误差和相对误差分别小于4 ℃和6.7%,目标辐射亮度测量精度高于10%,考虑大气与环境影响的比色测温方法可实现中低温目标温度精确测量。

English Abstract

参考文献 (35)

目录

    /

    返回文章
    返回