留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

电磁搅拌辅助钛合金激光沉积修复的电磁场模拟与验证

王维 刘奇 杨光 钦兰云 岳耀猛

王维, 刘奇, 杨光, 钦兰云, 岳耀猛. 电磁搅拌辅助钛合金激光沉积修复的电磁场模拟与验证[J]. 红外与激光工程, 2015, 44(9): 2666-2671.
引用本文: 王维, 刘奇, 杨光, 钦兰云, 岳耀猛. 电磁搅拌辅助钛合金激光沉积修复的电磁场模拟与验证[J]. 红外与激光工程, 2015, 44(9): 2666-2671.
Wang Wei, Liu Qi, Yang Guang, Qin Lanyun, Yue Yaomeng. Numerical simulation and verification of electromagnetic field in titanium alloy laser deposition repair with electromagnetic stirring[J]. Infrared and Laser Engineering, 2015, 44(9): 2666-2671.
Citation: Wang Wei, Liu Qi, Yang Guang, Qin Lanyun, Yue Yaomeng. Numerical simulation and verification of electromagnetic field in titanium alloy laser deposition repair with electromagnetic stirring[J]. Infrared and Laser Engineering, 2015, 44(9): 2666-2671.

电磁搅拌辅助钛合金激光沉积修复的电磁场模拟与验证

基金项目: 

国家自然科学基金(51305280);辽宁省高校创新团队(LT2011004)

详细信息
    作者简介:

    王维(1957-),男,教授,博士生导师,主要从事激光快速成形的研究。Email:773509255@qq.com

  • 中图分类号: TG146.2

Numerical simulation and verification of electromagnetic field in titanium alloy laser deposition repair with electromagnetic stirring

  • 摘要: 利用自行研制的电磁搅拌装置辅助钛合金激光沉积修复,通过有限元软件ANSYS进行数值模拟,并与试验相结合,研究了钛合金激光熔池内磁-电-力的相互作用关系。结果表明,在旋转磁场的作用下,激光熔池内的液体表面磁感应强度与激励电流成正比,与频率成反比;激光熔池受到径向力和切向力的作用,但是前者较小,可以忽略不计,液体横截面上电磁力密度最大值与激励电流成正比。在旋转磁场的作用下激光沉积修复件表面两侧凸起且修复层内部组织/片层长径比减小。
  • [1]
    [2] Liu Zhijian, Qu Xuanhui, Huang Boyun. Advanees in produeing TIAI alloy withP/M proeessing[J]. Materials Review, 1995, 2: 3-28. (in Chinese)
    [3] Kore S D, Date P P, Kulkarni S V. Effect of process parameters on electromagnetic impact welding of aluminum sheets[J]. International Journal of Impact Engineering, 2007, 34(8): 1327-1341.
    [4]
    [5] Gatzen M, Tang Z, Vollertsen F. Effect of electromagnetic stirring on the element distribution in laser beam welding of aluminium with filler wire [J]. Physics Procedia, 2011, 12: 56-65.
    [6]
    [7] Bai Fudong, Sha Minghong, Li Tingju, et al. Influence of rotating magnetic field on the microstructure and phase content of Ni-Al alloy[J]. Journal of Alloys and Compounds, 2011, 509(14): 4835-4838. (in Chinese)
    [8]
    [9]
    [10] Barman N, Kumar P, Dutta P. Studies on transport phenomena during solidification of an aluminum alloy in the presence of linear electromagnetic stirring[J]. Journal of Materials Processing Technology, 2009, 209(18-19): 5912-5923.
    [11] Luo Jian, Ma Jie, Wang Xiangjie, et al. Microstructure and property of Ni60CuMoW composite coating treated prepared with magnetic field and laser cladding process[J]. Rare Metal Materials and Engineering, 2009, 38(3): 215-219. (in Chinese)
    [12]
    [13]
    [14] Xu Jialu. Development and application of magnetic controlled submerged arc surfacing welding equipment with alternating double pulses[D]. Shenyang: Shenyang University of Technology, 2013: 1-61. (in Chinese)
    [15]
    [16] Yu Benhai, Hu Xuehui, Wu Yu'e, et al. Studies of the effects and mechanism of electromagnetic stirring on the microstructures and hardness of laser cladding WC-Co based alloy coating[J]. Chinese Journal of Lasers, 2010, 37(10): 2672-2677. (in Chinese)
    [17] Liu Hongxi, Ji Shengwei, Jiang Yehua, et al. microstructure and property of Fe60 composite coatings by rotating magnetic field auxiliary laser cladding[J]. Chinese Journal of Lasers, 2013, 40(1): 1-6. (in Chinese)
    [18]
    [19] Chen Xingrun, Zhang Zhifeng, Xu Jun, et al. numerical simulation of electromagnetic field, flow field and temperature field in semi-solid slurry preparation by electromagnetic stirring[J]. The Chinese Journal of Nonferrous Metals, 2010, 20(5): 932-945. (in Chinese)
    [20]
    [21] Zhang Qi, Jin Junze, Wang Tongmin, et al. analysis of molten metal flow in rotating magnetic field[J]. The Chinese Journal of Nonferrous Metals, 2007, 17(1): 98-104. (in Chinese)
    [22]
    [23]
    [24] Zhou Wuzhuang. Titanium Handbook[M]. Beijing: Chemical Industry Press, 2012: 1-78. (in Chinese)
    [25]
    [26] Li Wenbin. Magnetism Stress Engineering[M]. Beijing:Weapons Industry Press, 1991. (in Chinese)
    [27] Karl-Heinz Spitzer, Mathias Dubke, Klaus Schwerdtfeger, et al. Rotational electromagnetic stirring in continuous casting of round strands[J]. Metall Trans B, 1986 (17B): 119-131.
    [28]
    [29]
    [30] Hu Renxi. Anays 13.0 electromagnetic finite element analysis from entry to the master [M]. Beijing: China Machine Press, 2011, 12: 1-419. (in Chinese)
    [31]
    [32] Trindade L B, Vilela, Antonio C F, et al. Numerical model ofelectromagnetic stirring for continuous casting billets[J]. IEEE Transactions on Magnetics, 2002, 38(6): 3658-3660.
    [33] Wang Baofeng, Li Jianchao. Application of electromagnetic strirring technology in continuous casting[J]. Angang Technology, 2009, 1: 1-5. (in Chinese)
    [34]
    [35] Taylor R S, Leopold K E, Tan K O. Continuous Bv X excimer fluorescence using direct current discharge excitation [J]. A P L, 1991, 59(5): 525-527.
  • [1] 杨广峰, 郜峰, 崔静, 薛安源.  扫描速度对300M钢熔覆C276涂层组织及性能的影响 . 红外与激光工程, 2023, 52(1): 20220328-1-20220328-9. doi: 10.3788/IRLA20220328
    [2] 卞宏友, 徐效文, 刘伟军, 王蔚, 邢飞, 王慧儒.  激光沉积修复DD5合金的枝晶外延生长控制与显微组织特征 . 红外与激光工程, 2023, 52(5): 20220731-1-20220731-13. doi: 10.3788/IRLA20220731
    [3] 邱星武, 吴明军, 戚燕, 刘春阁, 张云鹏, 黄崇湘.  激光熔覆Al2CrFeCoCuNixTi高熵合金涂层的组织及耐蚀性能 . 红外与激光工程, 2018, 47(7): 706008-0706008(8). doi: 10.3788/IRLA201847.0706008
    [4] 王彦芳, 李豪, 石志强, 肖亚梅, 孙旭, 王亭.  激光熔覆高耐蚀Fe基固溶体合金涂层 . 红外与激光工程, 2017, 46(8): 806001-0806001(5). doi: 10.3788/IRLA201746.0806001
    [5] 鞠恒, 林成新, 张佳琪, 刘志杰.  Fe-Mn-Si形状记忆合金涂层残余应力模拟与测量 . 红外与激光工程, 2017, 46(10): 1017009-1017009(10). doi: 10.3788/IRLA201777.1017009
    [6] 钦兰云, 庞爽, 杨光, 王超, 王维.  激光沉积修复ZL114A铝合金的显微组织及显微硬度研究 . 红外与激光工程, 2017, 46(5): 506004-0506004(6). doi: 10.3788/IRLA201746.0506004
    [7] 杨光, 赵恩迪, 钦兰云, 李长富, 王维.  电磁搅拌对激光熔池熔体流速及其凝固组织影响研究 . 红外与激光工程, 2017, 46(9): 906006-0906006(8). doi: 10.3788/IRLA201746.0906006
    [8] 卞宏友, 雷洋, 李英, 杨光, 钦兰云, 王维, 韩双隆.  感应预热对激光沉积修复TA15钛合金显微组织和残余应力的影响 . 红外与激光工程, 2016, 45(7): 705003-0705003(6). doi: 10.3788/IRLA201645.0705003
    [9] 常金勇, 强希文, 胡月宏, 宗飞, 李志朝, 封双连.  激光传输光束抖动效应的数值模拟 . 红外与激光工程, 2015, 44(S1): 46-49.
    [10] 戴毅斌, 樊玉杰, 李明尧, 刘晓宇, 蒋彭胜, 殷开婷.  多点激光微冲击成形的数值模拟研究 . 红外与激光工程, 2015, 44(S1): 50-56.
    [11] 张金玉, 孟祥兵, 杨正伟, 王冬冬, 陶胜杰.  红外锁相法涂层测厚数值模拟与分析 . 红外与激光工程, 2015, 44(1): 6-11.
    [12] 王维, 李新宇, 杨光, 钦兰云, 任宇航.  超声场下激光沉积TA15钛合金的组织和力学性能 . 红外与激光工程, 2015, 44(12): 3559-3564.
    [13] 许兆美, 刘永志, 周建忠, 蒋素琴, 王庆安, 汪通, 洪宗海.  基于生死单元的激光铣削温度场数值模拟与验证 . 红外与激光工程, 2014, 43(6): 1755-1760.
    [14] 陈林, 杨立, 范春利, 吕事桂, 石宏臣.  线性调频激励的红外无损检测及其数值模拟 . 红外与激光工程, 2014, 43(5): 1385-1389.
    [15] 孙杜娟, 胡以华, 李乐.  气溶胶“沉降—扩散”联合动态数值模拟 . 红外与激光工程, 2014, 43(2): 449-453.
    [16] 唐淑君, 刘洪喜, 张晓伟, 王传琦, 蔡川雄, 蒋业华.  H13钢表面激光选区熔覆Ni-Al金属间化合物涂层的组织与性能 . 红外与激光工程, 2014, 43(5): 1621-1626.
    [17] 吴红兵, 王朋.  钛合金超精密切削过程的数值模拟与实验分析 . 红外与激光工程, 2014, 43(12): 3988-3992.
    [18] 钦兰云, 王婷, 杨光, 王维, 卞宏友, 任宇航.  激光沉积修复BT20合金试验研究 . 红外与激光工程, 2014, 43(2): 404-410.
    [19] 王维, 郭鹏飞, 杨光, 钦兰云, 卞宏友, 王伟, 任宇航.  超声波对BT20钛合金激光沉积修复作用机制探究 . 红外与激光工程, 2014, 43(8): 2453-2459.
    [20] 唐力铁, 于志闯, 赵乐至, 尹飞, 郭士波, 谈斌.  DF/HF化学激光器喷管总压损失的数值模拟 . 红外与激光工程, 2013, 42(5): 1194-1197.
  • 加载中
计量
  • 文章访问数:  433
  • HTML全文浏览量:  57
  • PDF下载量:  152
  • 被引次数: 0
出版历程
  • 收稿日期:  2015-01-05
  • 修回日期:  2015-02-15
  • 刊出日期:  2015-09-25

电磁搅拌辅助钛合金激光沉积修复的电磁场模拟与验证

    作者简介:

    王维(1957-),男,教授,博士生导师,主要从事激光快速成形的研究。Email:773509255@qq.com

基金项目:

国家自然科学基金(51305280);辽宁省高校创新团队(LT2011004)

  • 中图分类号: TG146.2

摘要: 利用自行研制的电磁搅拌装置辅助钛合金激光沉积修复,通过有限元软件ANSYS进行数值模拟,并与试验相结合,研究了钛合金激光熔池内磁-电-力的相互作用关系。结果表明,在旋转磁场的作用下,激光熔池内的液体表面磁感应强度与激励电流成正比,与频率成反比;激光熔池受到径向力和切向力的作用,但是前者较小,可以忽略不计,液体横截面上电磁力密度最大值与激励电流成正比。在旋转磁场的作用下激光沉积修复件表面两侧凸起且修复层内部组织/片层长径比减小。

English Abstract

参考文献 (35)

目录

    /

    返回文章
    返回