留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

红外诱饵弹干扰特性有限元建模

朱敏 陈宇 杨春玲

朱敏, 陈宇, 杨春玲. 红外诱饵弹干扰特性有限元建模[J]. 红外与激光工程, 2013, 42(8): 1979-1986.
引用本文: 朱敏, 陈宇, 杨春玲. 红外诱饵弹干扰特性有限元建模[J]. 红外与激光工程, 2013, 42(8): 1979-1986.
Zhu Min, Chen Yu, Yang Chunling. Infrared decoys interference characteristics of finite element modeling[J]. Infrared and Laser Engineering, 2013, 42(8): 1979-1986.
Citation: Zhu Min, Chen Yu, Yang Chunling. Infrared decoys interference characteristics of finite element modeling[J]. Infrared and Laser Engineering, 2013, 42(8): 1979-1986.

红外诱饵弹干扰特性有限元建模

基金项目: 

黑龙江省博士后资助(LBH-Z11157);中央高校基本科研业务费专项资金(HIT.NSRIF.2012010)

详细信息
    作者简介:

    朱敏(1981-),男,讲师,博士,主要从事红外图像处理方面的研究。Email:zhumin@hit.edu.cn

  • 中图分类号: TN216

Infrared decoys interference characteristics of finite element modeling

  • 摘要: 针对国内诱饵弹半实物仿真技术和红外制导技术研究的迫切需要,提出了针对诱饵弹干扰特性的有限元建模方法。通过分析诱饵弹的工作机理和运行状态,借助有限元方法建立诱饵弹的温度流场分布和空气变阻力运动特性模型,并通过仿真实验验证所提出模型的有效性和正确性,该方法不仅能为红外诱饵弹的设计和红外制导算法的研究提供依据,也对红外半实物仿真系统的搭建有重要指导意义。
  • [1] Sun Yi. Development of the electro-optic passive jamming technology[J]. Ship Electronic Engineering, 2010, 30(9): 39-42. (in Chinese)
    [2] Tong Zhongxiang. Optimal method for iInterfering with infrared homing missile by airborne infrared smoke[C]//ASIC, 2008, 4244: 588-592.
    [3] D Beasley, D Saylor. Overview of dynamic scene projectors at the US army aviation and missile command[C]//SPIE, 2009, 4469:147-156.
    [4] James Jackman. Countermeasure effectiveness against a man-portable air-defense system containing a two-color spinscan infrared seeker[J]. Optical Engineering, 2011, 50(12): 401-409.
    [5] Han C J, Sawyer B, Stockbrieg R, et al. Cryovacuum resistor infra red scene projector[C]//SPIE, 2009, 4469: 157-167.
    [6] Yang Yufeng. The effect of complex background infrared radiation on target scattering radiance[C]//IEEE, 2010, 4244: 749-752.
    [7] Huang Kang, Mao Xia. Novel approach to IR moving dim target detection against complex background[J]. Acta Aeronautica Et Astronautica Sinica, 2009, 30(9): 1754-1760.
    [8] Ji Yuanming. Characteristics in infrared radiation with deformation of bolt and rock[C]//IEEE, 2009, 2587: 215-217.
    [9] Hu Yifan. Evaluation the effectiveness of infrared flare with a tactic of dispensing in burst[C]//IEEE, 2010, 6044: 131-135.
    [10] Forrai David P, Maier James J. Generic models in the advanced IRCM assessment model[C]//WSC, 2011: 789-796.
    [11] Krzysztof Sibilski, Janusz B aszczyk. Modeling of helicopter self-defense system[C]//AIAA, 2010, 36: 474-479.
    [12] Huang Bingyue. Simulation of warship-equipped infrared bait's effectiveness in interfering with anti-vessel missile[J]. Journal of System Simulation, 2011, 21(1): 17-20. (in Chinese)
    [13] He Jiangfeng, Xu Li, Yan Junwu. Disturbance performance testing system of infrared disturbance artillery[J]. Ordnance Industry Automation, 2011, 21(1): 17-20. (in Chinese)
    [14] Hu Yifan. Method of evaluation the effect of airborne infrared decoy[J]. Infrared Technology, 2009, 30(3): 136-140. (in Chinese)
    [15] Wu Tao, Bai Yunta. Research into the jamming method to laser/IR composite guided missiles[J]. Shipboard Electronic Countermeasure, 2009, 30(2): 23-26. (in Chinese)
    [16] Zhang Hongyan. Simulation research on jamming mode of infrared ground-air missile[J]. Aeronautical Computing Technique, 2009, 39(4): 105-109. (in Chinese)
    [17] Hua Xiang, Wang Peng. A special 3D effect method of infrared decoy[C]//IEEE, 2010, 5540: 606-609.
    [18] Liu Jiacong, Liu Zhanchen, Zhang Hengxi, et al. Research on the movement characteristics of an infrared countermeasure bomb[J]. Journal of Missiles and Guidance, 2009, 26(3): 166-167. (in Chinese)
    [19] Kong Xiaoling. Simulation research on surface-type infrared decoy for jamming infrared imaging guided missile[J]. Command Control & Simulation, 2011, 33(1): 78-81. (in Chinese)
    [20] Wu Longbao, Xie Xiaofang, Wang Chencheng, et al. Modeling and simulation of supersonic missile temperature distribution[J]. Infrared and Laser Engineering, 2013, 42(1):1-6. (in Chinese)
    [21] Zhang Genbao. Numerical simulation of two-dimensional flapping-wing MAVs[J]. Journal of Donghua University(Natural Science), 2011, 37(2): 256-260. (in Chinese)
    [22] Liu Shoubao, Ruan Jiangjun, Du Zhiye, et al. Application of FE-BECM in 3D eddy current problem with open boundary[J]. High Voltage Engineering, 2010, 36(3): 655-659. (in Chinese)
    [23] Han Xiangke. Improved characteristic-based split finite element method for fluid dynamics[J]. Journal of Xi'An Jiao Tong University, 2011, 45(7): 112-114. (in Chinese)
    [24] Qian Ruojun, Han Xiangke, Su Bo. Numerical simulation of wind field based on fluid mechanics theory[J]. Spatial Structures, 2010, 16(4): 3-6. (in Chinese)
    [25] Zhong Fanjun, Wang Zhenping. Aeroelastic modeling and calculation of flying wing control surface linkage[J]. Aeronautical Computing Technique, 2010, 40(2): 53-56. (in Chinese)
    [26] Luo Maojie, Zhou Jinmei, Fu Jingneng, et al. Integration time as variable for radiometric calibration of infrared system[J]. Infrared and Laser Engineering, 2013, 42(1): 36-40. (in Chinese)
    [27] Lu Hu, Arvind Narayanaswamy. Near-field thermal radiation between two closely spaced glass plates exceeding Planck's blackbody radiation law[J]. Appl Phys Lett, 2008, 92(4): 236-239.
  • [1] 王伟平, 于佳睿, 胡小燕, 赵少宇.  中波红外集成偏振光栅结构参数对偏振性能影响仿真分析 . 红外与激光工程, 2021, 50(11): 20210132-1-20210132-8. doi: 10.3788/IRLA20210132
    [2] 高有道, 李福东, 沈正祥, 丁琳, 胡斌, 徐绍伟.  低温红外镜头设计仿真方法及试验验证 . 红外与激光工程, 2021, 50(5): 20200397-1-20200397-6. doi: 10.3788/IRLA20200397
    [3] 王凤杰, 刘锡民, 陆长平.  相干激光引信在云雾干扰下的回波特性研究 . 红外与激光工程, 2020, 49(4): 0403006-0403006-7. doi: 10.3788/IRLA202049.0403006
    [4] 刘尊洋, 叶庆, 李修和, 邵立, 孙晓泉.  红外预警卫星直视地表波段选择及探测能力 . 红外与激光工程, 2018, 47(2): 204003-0204003(6). doi: 10.3788/IRLA201847.0204003
    [5] 卢新然, 宋路, 万秋华.  红外光源参数对光电编码器信号的影响 . 红外与激光工程, 2017, 46(9): 917007-0917007(6). doi: 10.3788/IRLA201746.0917007
    [6] 毛羽丰, 李运泽, 王晶, 姜利祥, 魏传峰.  基于红外热成像的热流分布测量技术 . 红外与激光工程, 2016, 45(8): 804001-0804001(6). doi: 10.3788/IRLA201645.0804001
    [7] 施蕊, 徐畅, 徐锐, 石诺, 杨扬, 钱丽勋, 王欣, 李卓.  基于MEMS的红外动态图像生成技术 . 红外与激光工程, 2016, 45(2): 204002-0204002(5). doi: 10.3788/IRLA201645.0204002
    [8] 殷世民, 王具民, 梁永波, 朱健铭, 韩国成, 陈洪波, 陈真诚.  红外干涉光谱仪非均匀性在线校正与仿真 . 红外与激光工程, 2016, 45(6): 604002-0604002(8). doi: 10.3788/IRLA201645.0604002
    [9] 袁洪琳, 李帆, 于涛, 张存读, 赵建辉.  基于可分离模糊核的复合运动模糊星图建模与仿真 . 红外与激光工程, 2016, 45(11): 1126001-1126001(9). doi: 10.3788/IRLA201645.1126001
    [10] 王炜强, 贾晓洪, 韩宇萌, 张晓阳, 付奎生.  定向干扰激光的红外成像建模与仿真 . 红外与激光工程, 2016, 45(6): 606005-0606005(6). doi: 10.3788/IRLA201645.0606005
    [11] 柴国贝, 张建奇, 刘德连, 黄曦, 张冬阳.  海洋环境对红外诱饵弹干扰特性建模及仿真 . 红外与激光工程, 2016, 45(3): 304009-0304009(8). doi: 10.3788/IRLA201645.0304009
    [12] 张瑞, 王志斌, 王耀利, 李克武.  可实现零光程差的红外静态斜楔干涉具研究 . 红外与激光工程, 2015, 44(7): 2093-2096.
    [13] 张仲瑜, 焦淑红.  多特征融合的红外舰船目标检测方法 . 红外与激光工程, 2015, 44(S1): 29-34.
    [14] 郭冰涛, 王晓蕊, 王小兵, 袁宏学, 杨红坚.  诱饵弹作用后导引头成像特征建模及跟踪性能分析 . 红外与激光工程, 2015, 44(7): 2027-2033.
    [15] 童奇, 王超哲, 童中翔, 李建勋, 贾林通, 柴世杰.  红外干扰机对四元正交探测器的干扰效能 . 红外与激光工程, 2014, 43(8): 2496-2504.
    [16] 刘朝山, 刘光斌, 杨波, 周浩.  弹载星敏感器像移模型及其仿真分析 . 红外与激光工程, 2013, 42(5): 1311-1315.
    [17] 张文攀, 刘艳芳, 殷瑞光, 赵宏鹏, 汪亚.  对激光精确制导武器干扰效果仿真评估标准初探 . 红外与激光工程, 2013, 42(4): 900-903.
    [18] 曹春芹, 向静波, 张晓阳, 王炜强.  红外成像导弹气动加热仿真建模方法 . 红外与激光工程, 2013, 42(8): 1951-1955.
    [19] 成志铎, 李明博, 李健, 常晓权, 刘君.  目标与背景的红外辐射特性仿真方法 . 红外与激光工程, 2013, 42(9): 2336-2340.
    [20] 郭冰涛, 王晓蕊, 黄曦, 刘德连, 柴国贝.  地物环境对红外诱饵弹散射特性建模及仿真 . 红外与激光工程, 2013, 42(2): 300-304.
  • 加载中
计量
  • 文章访问数:  324
  • HTML全文浏览量:  52
  • PDF下载量:  137
  • 被引次数: 0
出版历程
  • 收稿日期:  2012-12-27
  • 修回日期:  2013-01-16
  • 刊出日期:  2013-08-25

红外诱饵弹干扰特性有限元建模

    作者简介:

    朱敏(1981-),男,讲师,博士,主要从事红外图像处理方面的研究。Email:zhumin@hit.edu.cn

基金项目:

黑龙江省博士后资助(LBH-Z11157);中央高校基本科研业务费专项资金(HIT.NSRIF.2012010)

  • 中图分类号: TN216

摘要: 针对国内诱饵弹半实物仿真技术和红外制导技术研究的迫切需要,提出了针对诱饵弹干扰特性的有限元建模方法。通过分析诱饵弹的工作机理和运行状态,借助有限元方法建立诱饵弹的温度流场分布和空气变阻力运动特性模型,并通过仿真实验验证所提出模型的有效性和正确性,该方法不仅能为红外诱饵弹的设计和红外制导算法的研究提供依据,也对红外半实物仿真系统的搭建有重要指导意义。

English Abstract

参考文献 (27)

目录

    /

    返回文章
    返回