红外成像对抗中导引头伺服系统建模与分析

李慧

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

红外成像对抗中导引头伺服系统建模与分析

李慧

文章导航 > 红外与激光工程 > 2013 > 42(10): 2603-2607

李慧. 红外成像对抗中导引头伺服系统建模与分析[J]. 红外与激光工程, 2013, 42(10): 2603-2607.

引用本文:

李慧. 红外成像对抗中导引头伺服系统建模与分析[J]. 红外与激光工程, 2013, 42(10): 2603-2607.

Li Hui. Modeling and analysis of servo system on countermeasure of IR imaging seeker[J]. Infrared and Laser Engineering, 2013, 42(10): 2603-2607.

Citation:

Li Hui. Modeling and analysis of servo system on countermeasure of IR imaging seeker[J]. Infrared and Laser Engineering, 2013, 42(10): 2603-2607.

红外成像对抗中导引头伺服系统建模与分析

李慧

1.
中国洛阳电子装备试验中心,河南洛阳 471003

基金项目:

总装预研基金（51303040203）

详细信息

作者简介:
李慧（1980- ），男，博士，主要从事光电对抗仿真技术研究。Email：limingj12@163.com

中图分类号: TN977

Modeling and analysis of servo system on countermeasure of IR imaging seeker

Li Hui

1.
Luoyang Electronic Equipment Test Center of China,Luoyang 471003,China

摘要: 红外成像制导武器对抗是光电对抗的重点领域。在红外成像制导对抗数字图像注入式闭环半实物仿真试验时，由于红外导引头传感器被图像生成和图像注入计算机取代不参与工作，需要建立准确的导引头伺服控制系统的传递函数模型，进行仿真实验和实际工作两种情况下导引头控制回路性能的等效性分析。基于此，结合某型红外成像导引头的结构组成特点，将导引头划分为七个不同的功能模块，提出了导引头伺服控制系统建模的总体设计方法。采用机理建模和实验测试结合的方法建立了该型导引头完整的伺服系统模型，导引头在幅值5，频率2 Hz 弹体正弦扰动下的光轴能够保持稳定，经过测试，导引头实际输出弹目视线角和角速率能够高精度稳定跟踪真实的弹目视线角和角速率，结果验证了伺服控制系统数学模型的准确性。研究成果为同类设备伺服系统的建模和红外成像制导武器对抗图像注入式闭环仿真测试实验提供了方法和模型支持。
- 红外成像对抗 /
- 红外成像导引头 /
- 图像注入式仿真 /
- 伺服系统建模
Abstract: Infrared imaging guidance weapon countermeasure was the important fields of opto-electronic countermeasures. The detector of IR imaging seeker was replaced by image emulation and injection computer in the hardware-in-the-loop simulation test of digital image injection, it was necessary to consider the equivalence of control capability for the servo system under the simulation test and actual conditions by means of building the accurate transfer function of servo system for the IR imaging seeker. Based on this, the entire servo system of the seeker was divided into seven different function module according to the configuration of the seeker, and the total design method about the modeling of the servo system was proposed. Then the integrated mathematic model of the servo system was set up by adopting the mechanism modeling combined with the experimental test method. Light axis of the seeker remained in a state of stabilization with 5 amplitude and 2 Hz disturbing of bomb. Line of sight and line of sight velocity between target and bomb of simulation output could precisely track the actual line of sight and line of sight velocity by testing the model. Simulation analysis validates the correctness of the model of the servo control system. The results of research provide theoretical method support for the modeling of the servo control system for the same type device, and also give the model for the feasibility of the new digital image injection simulation test on the infrared imaging guidance weapon.
- IR imaging countermeasure /
- IR imaging seeker /
- image injection simulation /
- servo system modeling

[1]	Fan Huitao, Liu Daijun. Development trends of short-range dogfight IR air to air missile [J]. Infrared and Laser Engineering, 2005, 34(5): 564-568.(in Chinese)
[2]
[3]
[4]	Zhao Shuang, Fang Youpei. Infrared imaging guidance and its countermeasures[J]. Infrared and Laser Engineering, 2006, 35(10): 197-201. (in Chinese)
[5]	Fang Youpei. Jamming Technology research to the imaging guidance missile [J]. Infrared and Laser Engineering, 2000, 29(3): 17-11. (in Chinese)
[6]
[7]	Wu Junhui, Li Hui, Xu Zhenling, et al. Theoretical research on IR capturing and tracking device simulation based on digital image injection [J]. Infrared and Laser Engineering, 2012, 41(12): 3166-3171. (in Chinese)
[8]
[9]
[10]	Li Hui, Wu Junhui, Zhu Zhen, et al. Analysis and simulation of stabilization and tracking principle for rate gyroscope laser seeker [J]. Infrared and Laser Engineering, 2011, 40 (7): 1337-1341. (in Chinese)
[11]	Lin Defu, Wang Zhiwei, Wang Jiang. Singularity analysis of roll-pitch seeker and its control strategy [J]. Transactions of Beijing Institute of Technology, 2010, 30(11): 1265-1269. (in Chinese)
[12]
[13]	Qi Zaikang, Xia Qunli. Guided Weapon Control System[M]. Beijing: Beijing Institute Technology Press, 2004.
[14]
[15]
[16]	Li Hui, Wu Junhui, Hu Xin, et al. Dynamic modeling and simulation of dynamic-gyro laser homing head [J]. Laser Infrared, 2011, 41(7): 758-762. (in Chinese)
[17]
[18]	Dong Yan, Zhang Tao. Identification and design of roll axis servo system in airborne solid mapping camera[J]. Optics and Precision Engineering, 2011, 19(7): 1580-1587. (in Chinese)
[19]	Han Bangcheng, Ma Jijun, Li Haitao. Modeling and compensation of nonlinear friction in harmonic driver [J]. Optics and Precision Engineering, 2011, 19(5): 1095-1103. (in Chinese)

[1]	谢亚峰, 朴明旭, 唐金力, 赵渊明, 连文泽, 范杰平, 张博. 激光/红外双模环形孔径导引头光学系统设计 . 红外与激光工程, 2023, 52(2): 20220442-1-20220442-8. doi: 10.3788/IRLA20220442
[2]	徐进, 杨世海, 叶宇, 顾伯忠. 极端环境下光学红外望远镜伺服系统模型预测 . 红外与激光工程, 2021, 50(12): 20210209-1-20210209-8. doi: 10.3788/IRLA20210209
[3]	毛延凯, 赵振宇, 张国华, 时光煜. 红外双波段/双视场导引头的光学设计 . 红外与激光工程, 2020, 49(7): 20190490-1-20190490-5. doi: 10.3788/IRLA20190490
[4]	于鲲, 郭彪, 丛明煜. 空间目标临边探测背景红外成像建模与图像仿真 . 红外与激光工程, 2019, 48(9): 904005-0904005(10). doi: 10.3788/IRLA201948.0904005
[5]	杜亚雯, 董全林, 蒲小琴, 李黎明, 张春熹. 基于模糊滑模的激光导引头伺服控制系统仿真分析 . 红外与激光工程, 2019, 48(S2): 31-37. doi: 10.3788/IRLA201948.S213003
[6]	徐洋, 方洋旺, 伍友利, 肖冰松, 张丹旭, 刘欢. 红外诱饵干扰下导引头视线角速度跳变特征建模 . 红外与激光工程, 2019, 48(5): 504001-0504001(11). doi: 10.3788/IRLA201948.0504001
[7]	柴国贝, 赵晓宁, 刘玮, 鲍文卓, 谢晓阳, 李强. 高温窗口作用下红外导引头性能建模与评估 . 红外与激光工程, 2019, 48(9): 904003-0904003(7). doi: 10.3788/IRLA201948.0904003
[8]	钮赛赛, 印剑飞, 曹卫卫, 杨尧, 王晓柱, 宋敏敏. 红外成像系统激光干扰耀斑仿真建模 . 红外与激光工程, 2017, 46(S1): 13-17.
[9]	孙赤全, 赵侃, 孟军合, 穆郁. 滚仰式导引头红外光学系统设计 . 红外与激光工程, 2017, 46(2): 204005-0204005(6). doi: 10.3788/IRLA201746.0204005
[10]	刘仲宇, 张涛, 王平, 王统军. 红外导引头稳定平台主框架拓朴优化设计 . 红外与激光工程, 2016, 45(2): 218001-0218001(5). doi: 10.3788/IRLA201645.0218001
[11]	童奇, 李建勋, 方洋旺, 李成, 童中翔, 柴世杰, 张志波, 贾林通. 面源红外诱饵对抗成像制导导弹的仿真研究 . 红外与激光工程, 2015, 44(4): 1150-1157.
[12]	殷笑尘, 付彦辉. 红外/激光共孔径双模导引头光学系统设计 . 红外与激光工程, 2015, 44(2): 428-431.
[13]	郭冰涛, 王晓蕊, 王小兵, 袁宏学, 杨红坚. 诱饵弹作用后导引头成像特征建模及跟踪性能分析 . 红外与激光工程, 2015, 44(7): 2027-2033.
[14]	张晓阳, 徐琰珂, 付奎生. 红外成像导引头视场选择及搜索策略设计 . 红外与激光工程, 2014, 43(12): 3866-3871.
[15]	王敏, 黄成功, 郭正红, 许振领, 亓凤杰, 李华. 红外成像导引头闭环注入式仿真试验系统设计及一致性分析 . 红外与激光工程, 2014, 43(10): 3211-3216.
[16]	张鑫, 贾宏光. 90°离轴角红外滚仰式导引头光学系统 . 红外与激光工程, 2013, 42(1): 143-147.
[17]	杨淼淼, 刘连伟, 许振领, 樊宏杰, 王敏, 刘艳芳. 数字注入式仿真的红外侦察告警系统作用距离等效推算 . 红外与激光工程, 2013, 42(7): 1674-1679.
[18]	钱方, 郭劲, 邵俊峰, 王挺峰. 调幅式红外导引头干扰机理 . 红外与激光工程, 2013, 42(6): 1432-1436.
[19]	王敏, 邹前进, 王彦斌, 黄成功, 李慧. 红外成像导引头闭环注入式仿真试验可行性分析 . 红外与激光工程, 2013, 42(10): 2614-2619.
[20]	徐琰珂, 梁晓庚, 贾晓洪. 雷达/红外复合导引头信息融合算法 . 红外与激光工程, 2012, 41(1): 30-36.

点击查看大图

计量

文章访问数: 376
HTML全文浏览量: 98
PDF下载量: 206
被引次数: 0

红外成像对抗中导引头伺服系统建模与分析

李慧

1. 中国洛阳电子装备试验中心,河南洛阳 471003

作者简介:
李慧（1980- ），男，博士，主要从事光电对抗仿真技术研究。Email：limingj12@163.com

收稿日期: 2013-02-13
修回日期: 2013-03-07
刊出日期: 2013-10-25

基金项目:

总装预研基金（51303040203）

中图分类号: TN977

关键词:

摘要: 红外成像制导武器对抗是光电对抗的重点领域。在红外成像制导对抗数字图像注入式闭环半实物仿真试验时，由于红外导引头传感器被图像生成和图像注入计算机取代不参与工作，需要建立准确的导引头伺服控制系统的传递函数模型，进行仿真实验和实际工作两种情况下导引头控制回路性能的等效性分析。基于此，结合某型红外成像导引头的结构组成特点，将导引头划分为七个不同的功能模块，提出了导引头伺服控制系统建模的总体设计方法。采用机理建模和实验测试结合的方法建立了该型导引头完整的伺服系统模型，导引头在幅值5，频率2 Hz 弹体正弦扰动下的光轴能够保持稳定，经过测试，导引头实际输出弹目视线角和角速率能够高精度稳定跟踪真实的弹目视线角和角速率，结果验证了伺服控制系统数学模型的准确性。研究成果为同类设备伺服系统的建模和红外成像制导武器对抗图像注入式闭环仿真测试实验提供了方法和模型支持。

English Abstract

Modeling and analysis of servo system on countermeasure of IR imaging seeker

Li Hui

1. Luoyang Electronic Equipment Test Center of China,Luoyang 471003,China

Received Date: 2013-02-13
Rev Recd Date: 2013-03-07
Publish Date: 2013-10-25

Keywords:

Abstract: Infrared imaging guidance weapon countermeasure was the important fields of opto-electronic countermeasures. The detector of IR imaging seeker was replaced by image emulation and injection computer in the hardware-in-the-loop simulation test of digital image injection, it was necessary to consider the equivalence of control capability for the servo system under the simulation test and actual conditions by means of building the accurate transfer function of servo system for the IR imaging seeker. Based on this, the entire servo system of the seeker was divided into seven different function module according to the configuration of the seeker, and the total design method about the modeling of the servo system was proposed. Then the integrated mathematic model of the servo system was set up by adopting the mechanism modeling combined with the experimental test method. Light axis of the seeker remained in a state of stabilization with 5 amplitude and 2 Hz disturbing of bomb. Line of sight and line of sight velocity between target and bomb of simulation output could precisely track the actual line of sight and line of sight velocity by testing the model. Simulation analysis validates the correctness of the model of the servo control system. The results of research provide theoretical method support for the modeling of the servo control system for the same type device, and also give the model for the feasibility of the new digital image injection simulation test on the infrared imaging guidance weapon.