高陡度保形光学非球面环形子孔径检测方法

王洪浩; 明名; 吕天宇; 邹惠莹

doi:10.3788/IRLA201645.0417001

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

高陡度保形光学非球面环形子孔径检测方法

王洪浩, 明名, 吕天宇, 邹惠莹

文章导航 > 红外与激光工程 > 2016 > 45(4): 417001-0417001(7)

王洪浩, 明名, 吕天宇, 邹惠莹. 高陡度保形光学非球面环形子孔径检测方法[J]. 红外与激光工程, 2016, 45(4): 417001-0417001(7). doi: 10.3788/IRLA201645.0417001

引用本文:

王洪浩, 明名, 吕天宇, 邹惠莹. 高陡度保形光学非球面环形子孔径检测方法[J]. 红外与激光工程, 2016, 45(4): 417001-0417001(7). doi: 10.3788/IRLA201645.0417001

Wang Honghao, Ming Ming, Lv Tianyu, Zou Huiying. Testing methods of high-gradient conformal aspheric surfaces based on annular sub-aperture stitching[J]. Infrared and Laser Engineering, 2016, 45(4): 417001-0417001(7). doi: 10.3788/IRLA201645.0417001

Citation:

Wang Honghao, Ming Ming, Lv Tianyu, Zou Huiying. Testing methods of high-gradient conformal aspheric surfaces based on annular sub-aperture stitching[J]. Infrared and Laser Engineering, 2016, 45(4): 417001-0417001(7). doi: 10.3788/IRLA201645.0417001

高陡度保形光学非球面环形子孔径检测方法

doi: 10.3788/IRLA201645.0417001

1.
中国科学院长春光学精密机械与物理研究所,吉林长春 130033;
2.
长春师凯科技产业有限责任公司,吉林长春 130033

详细信息

作者简介:
王洪浩(1990-),男,助理研究员,硕士,主要从事大型光机结构装调与检测等方面的研究。Email:whh_hit@163.com

中图分类号: TH706

Testing methods of high-gradient conformal aspheric surfaces based on annular sub-aperture stitching

1.
Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;
2.
Changchun Shikai Science and Technology Industry Co.,LTD,Changchun 130033,China

摘要: 环形子孔径拼接技术检测大口径、高陡度光学非球面具有低成本、高效率的特点。提出一种基于最小二乘法和泽尼克多项式拟合的环形子孔径拼接方法检测高陡度光学非球面。研究了环形子孔径拼接算法的基本原理,对环形子孔径的划分方式进行数学公式推导及参数运算,建立被测非球面的有效数学模型。全口径的拼接结果与原始波面基本一致,二者PV和RMS差值分别为0.015 1、0.004 7(为632.8 nm),残差的PV和RMS值为0.043 5、0.005 2,验证该算法的有效性和准确性。
- 高陡度 /
- 高精度检测 /
- 环形子孔径拼接 /
- 拼接算法
Abstract: Annular sub-aperture stitching interferometry technology can test steep conformal aspheric surfaces with low cost and high efficiency without auxiliary null optics. The effective splicing algorithm was established based on simultaneous least-squares method and Zernike polynomial fitting. Firstly, the basic principle of the algorithm of the annular sub-aperture stitching was studied. Secondly, the mathematical formulas of the sub-aperture effective area were derived and the parameters of the sub-aperture effective area were calculated and optimized. Finally, the reasonable mathematical model was established. The detection method of annular sub-aperture stitching high steepness aspheric has been tested through on experimental verification. As a result, the surface map of the full aperture after stitching was consistent to the input surface map, the difference of PV error and RMS error between them is 0.015 1 and 0.004 7( is 632.8 nm); the PV and RMS of residual error of full aperture phase distribution is 0.043 5 and 0.005 2. The results conclude that this splicing model and algorithm were accurate and feasible.
- high-gradient /
- high-precision testing /
- annular sub-aperture stitching /
- stitching algorithm

[1]	Zhang Pengfei, Zhao Hong, Liu Bincai, et al. Simple method for the implementation of subaperture stitching interferometry[J]. Optical Engineering, 2011, 50(9):35-36.(in Chinese)
[2]	Lin P C, Chen Y C, Lee C M, et al. A subaperture stitching algorithm for aspheric surfaces[C]//SPIE, 2011, 5(14):15-17.
[3]	Zhao Wenzhe, Qin Shiyin. Multiply kernels matching for precise television guidance[J]. Optical Engineering, 2011, 50(8):1-3. (in Chinese)
[4]	Liang C W, Chen Y A, Lee C C. The off-axis alignment of an asphere by a Fizeau interferomete[C]//SPIE, 2011, 4(7):83-84.
[5]	W Lyda. Automated multiscale measurement system for MEMS characterization[C]//SPIE, 2010, 38(3):77-78.
[6]	Chen S, Liao W, Dai Y, et al. Self-calibrated sub-aperture stitching test of hyper-hemispheres using latitude and longitude coordinates[J]. Appl Opt, 2012, 51(33):17-25.
[7]	Lin Po-Chih, ChenYi-Chun, Lee Chung-Min, et al. A subaperture stitching algorithm for aspheric surfaces[C]//SPIE, 2011, 8082:80821G-1.

[1]	蔡梦雪, 王孝坤, 张志宇, 李凌众, 王晶, 李文涵, 张学军. 高陡度镜面干涉检测的仪器传递函数标定(特邀) . 红外与激光工程, 2023, 52(9): 20230462-1-20230462-8. doi: 10.3788/IRLA20230462
[2]	苏航, 王孝坤, 程强, 李凌众, 王晶, 李雯研, 吴琼, 唐瓦, 罗霄, 张学军. 子孔径拼接和计算全息混合补偿检测大口径凸非球面(特邀) . 红外与激光工程, 2022, 51(9): 20220576-1-20220576-9. doi: 10.3788/IRLA20220576
[3]	沈正祥, 王旭, 余俊. 基于离散化路径与拼接的高精度光学检测方法 . 红外与激光工程, 2022, 51(11): 20210144-1-20210144-10. doi: 10.3788/IRLA20210144
[4]	相超, 王道档, 窦进超, 孔明, 刘璐, 许新科. 光学偏折子孔径拼接面形检测技术 . 红外与激光工程, 2021, 50(11): 20210105-1-20210105-7. doi: 10.3788/IRLA20210105
[5]	闫力松, 张斌智, 王孝坤, 黎发志. 平面镜子孔径加权拼接检测算法(特邀) . 红外与激光工程, 2021, 50(10): 20210520-1-20210520-6. doi: 10.3788/IRLA20210520
[6]	孔明, 郝玲, 刘维, 王道档, 许新科, 李芹. 数字全息中基于优化Harris角点的相位拼接算法 . 红外与激光工程, 2019, 48(11): 1126002-1126002(7). doi: 10.3788/IRLA201948.1126002
[7]	蔡怀宇, 武晓宇, 卓励然, 黄战华, 王星宇. 结合边缘检测的快速SIFT图像拼接方法 . 红外与激光工程, 2018, 47(11): 1126003-1126003(7). doi: 10.3788/IRLA201847.1126003
[8]	卢丙辉, 陈凤东, 刘炳国, 刘国栋, 戚子文. 基于映射图像匹配的子孔径拼接技术 . 红外与激光工程, 2016, 45(8): 824005-0824005(6). doi: 10.3788/IRLA201645.0824005
[9]	闫公敬, 张宪忠. 子孔径拼接检测凸球面技术研究 . 红外与激光工程, 2016, 45(5): 517002-0517002(4). doi: 10.3788/IRLA201645.0517002
[10]	安其昌, 张景旭, 杨飞, 张科欣. 基于结构函数的子孔径拼接算法研究 . 红外与激光工程, 2015, 44(3): 929-933.
[11]	闫公敬, 张宪忠. 基于最大似然估计算法的子孔径拼接检测技术 . 红外与激光工程, 2015, 44(7): 2206-2210.
[12]	张宇, 金春水, 马冬梅, 王丽萍. 光纤相移点衍射干涉仪关键技术 . 红外与激光工程, 2015, 44(1): 254-259.
[13]	杨磊, 曹剑中, 唐利孬, 高博, 王华, 郭惠楠. 全景图像自动拼接算法的优化设计 . 红外与激光工程, 2014, 43(3): 985-990.
[14]	闫力松, 王孝坤, 郑立功, 王润强, 张学军. 大口径反射镜子孔径拼接自检验精度分析 . 红外与激光工程, 2014, 43(6): 1920-1924.
[15]	闫力松, 王孝坤, 罗霄, 曾雪锋, 郑立功, 张学军. 基于非理想标准镜的子孔径拼接干涉检测技术研究 . 红外与激光工程, 2014, 43(1): 178-183.
[16]	闫公敬, 张宪忠, 李柱. 子孔径拼接检测光学平面反射镜技术 . 红外与激光工程, 2014, 43(7): 2180-2184.
[17]	邓万涛, 汪凯巍, 白剑, 张金春. 高精度子孔径拼接中参考面误差的去除方法 . 红外与激光工程, 2014, 43(4): 1194-1199.
[18]	王孝坤. 大口径凸非球面反射镜子孔径拼接检测 . 红外与激光工程, 2013, 42(3): 716-722.
[19]	王宁, 贾辛, 邢廷文. 子孔径拼接检测浅度非球面 . 红外与激光工程, 2013, 42(9): 2525-2530.
[20]	闫力松, 王孝坤, 罗霄, 郑立功, 张学军. 采用三角剖分算法的子孔径拼接检测技术 . 红外与激光工程, 2013, 42(7): 1793-1797.

点击查看大图

计量

文章访问数: 382
HTML全文浏览量: 41
PDF下载量: 134
被引次数: 0

高陡度保形光学非球面环形子孔径检测方法

doi: 10.3788/IRLA201645.0417001

1. 中国科学院长春光学精密机械与物理研究所,吉林长春 130033;

2. 长春师凯科技产业有限责任公司,吉林长春 130033

作者简介:
王洪浩(1990-),男,助理研究员,硕士,主要从事大型光机结构装调与检测等方面的研究。Email:whh_hit@163.com

收稿日期: 2015-07-24
修回日期: 2015-08-27
刊出日期: 2016-04-25

中图分类号: TH706

关键词:

摘要: 环形子孔径拼接技术检测大口径、高陡度光学非球面具有低成本、高效率的特点。提出一种基于最小二乘法和泽尼克多项式拟合的环形子孔径拼接方法检测高陡度光学非球面。研究了环形子孔径拼接算法的基本原理,对环形子孔径的划分方式进行数学公式推导及参数运算,建立被测非球面的有效数学模型。全口径的拼接结果与原始波面基本一致,二者PV和RMS差值分别为0.015 1、0.004 7(为632.8 nm),残差的PV和RMS值为0.043 5、0.005 2,验证该算法的有效性和准确性。

English Abstract

Testing methods of high-gradient conformal aspheric surfaces based on annular sub-aperture stitching

1. Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China;

2. Changchun Shikai Science and Technology Industry Co.,LTD,Changchun 130033,China

Received Date: 2015-07-24
Rev Recd Date: 2015-08-27
Publish Date: 2016-04-25

Keywords:

Abstract: Annular sub-aperture stitching interferometry technology can test steep conformal aspheric surfaces with low cost and high efficiency without auxiliary null optics. The effective splicing algorithm was established based on simultaneous least-squares method and Zernike polynomial fitting. Firstly, the basic principle of the algorithm of the annular sub-aperture stitching was studied. Secondly, the mathematical formulas of the sub-aperture effective area were derived and the parameters of the sub-aperture effective area were calculated and optimized. Finally, the reasonable mathematical model was established. The detection method of annular sub-aperture stitching high steepness aspheric has been tested through on experimental verification. As a result, the surface map of the full aperture after stitching was consistent to the input surface map, the difference of PV error and RMS error between them is 0.015 1 and 0.004 7( is 632.8 nm); the PV and RMS of residual error of full aperture phase distribution is 0.043 5 and 0.005 2. The results conclude that this splicing model and algorithm were accurate and feasible.