Lapping performance on quartz glass of fixed abrasive pad embedded with multi-grain diamond grits
-
摘要: 通过粘结剂将单晶金刚石制成粒径更大的多晶金刚石。采用SEM观察了多晶金刚石的微观形貌,分别制备了单晶和多晶金刚石固结磨料研磨垫,比较了单晶与多晶金刚石固结磨料研磨垫的研磨性能。结果表明:单晶金刚石固结磨料垫与多晶金刚石固结磨料垫精研石英玻璃的表面粗糙度相似;但多晶金刚石固结磨料垫的材料去除率更高且稳定;多晶金刚石在研磨过程中的微破碎,确保了其自修整过程的实现。另外,多晶金刚石研结磨料垫研磨的石英玻璃亚表面损伤层深度小,约为原始单晶金刚石粒径的1/2。Abstract: Multi-grain diamond grits were prepared through binding micro diamond particles with binder. SEM(Scanning Electron Microscope) was adopted to observe their microscopic morphology, and both multi-grain diamond grits and single diamond grits are made into fixed abrasive pads (FAP). The lapping performance of FAP embedded with multi-grain diamond particles was compared with that with single diamond particles. Results show that the average surface roughness lapped with multi-grain diamond FAP is almost the same as that lapped with single diamond FAP, and the multi-grain diamond FAP shows a higher and more stable material removal rate. The micro-fracture of multi-grain diamond grit in lapping process guarantees the realization of self-conditioning of hydrophilic FAP. In addition, the subsurface damage depth of quartz glass lapped with multi-grain diamond FAP is much smaller, which is only about 1/2 of that with single diamond FAP.
-
Key words:
- multi-grain diamond /
- quartz glass /
- fixed abrasive pad /
- lapping performance
-
[1] Su Ying, He Xingyang, Xiang Zaikui, et al. Structural defects and formation mechanism in silica glasses[J]. Journal of Wuhan University of Technology, 2007, 29(8):50-54. (in Chinese) [2] Yang Minghong, Zhao Yuan'an, Su Hanhan, et al. Influence of subsurface cracks on the laser damage resistance of anti-reflection coated fused silica[J]. Chinese Journal of Lasers, 2012, 39(8):0807001. (in Chinese) [3] Guo Shaofeng, Lu Qisheng, Yin Yan, et al. Theoretical study on damage thresholds for elastic stress fracture in laser-irradiated optical glass[J]. Infrared and Laser Engineering, 2004, 33(2):133-137. (in Chinese) [4] Wang Zhuo, Wu Yuguang, Dai Yifan, et al. Characterization of Subsurface Damage of Optical Materials in Lapping Process[J]. Nanotechnology and Precision Engineering, 2008, 6(5):349-355. (in Chinese) [5] Shen J, Liu S, Yi K, et al. Subsurface damage in optical substrates[J]. Optik-International Journal for Light and Electron Optics, 2005, 116(6):288-294. [6] Yuan Julong, Wang Zhiwei, Wen Donghui, et al. Review of the current situation of ultra-precision machining[J]. Chinese Journal of Mechanical Engineering, 2007, 43(1):35-48. (in Chinese) [7] Wang Zhuo, Wu Yulie, Dai Yifan, et al. Rapid detection of subsurface damage of optical materials in lapping process and its influence regularity[J]. Optics and Precision Engineering, 2008, 16(1):16-21. (in Chinese) [8] Yang Minghong, Zhao Yuan'an, Yi Kui, et al. Subsurface damage characterization of ground fused silica by HF etching combined with polishing layer by layer[J]. Chinese Journal of Lasers, 2012, 39(3):0303007. (in Chinese) [9] Wang Wenze, Li Jun, Xia Lie, et al. Effect of abrasive sizes on lapping performance of fixed abrasive pad when machining quartz glass[J]. Diamond Abrasives Engineering, 2015(2):9-13. (in Chinese) [10] Zhu Nannan, Zhu Yongwei, Li Jun, et al. Subsurface damage depth of lithium niobate crystal in lapping[J]. Optics and Precision Engineering, 2015, 23(12):3387-3394. (in Chinese) [11] Gao P, Li J, Zhu Y W, et al. Study on subsurface damage after fixed-abrasive lapping with different particle size[J]. Solid State Phenomena, 2011, 175:112-115. [12] Liu Tingting, Zhu Yongwei, Wang Jiashun, et al. Influence of Ni covering ratio of diamond on maching performance of fixed abrasive pad[J]. Infrared and Laser Engineering, 2014, 43(12):4045-4050. (in Chinese) [13] Chen F, Gen X U, Chun-De M A, et al. Thermal residual stress of polycrystalline diamond compacts[J]. Transactions of Nonferrous Metals Society of China, 2010, 20(2):227-232. [14] Li Chunlin, Chen Jian. Preparation of polycrystalline diamond powders and its yield and wear resistance[J]. Materials for Mechanical Engineering, 2012(6):17-19. (in Chinese) [15] Gao Kai. Study on preparation and functional properties of polycrystalline diamond materials[D]. Tianjin:Tianjin University, 2011. (in Chinese)
计量
- 文章访问数: 433
- HTML全文浏览量: 74
- PDF下载量: 120
- 被引次数: 0