基于参考源的空间目标红外辐射特性测量

陈川; 易维宁; 崔文煜

doi:10.3788/IRLA201847.0804004

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于参考源的空间目标红外辐射特性测量

陈川, 易维宁, 崔文煜

文章导航 > 红外与激光工程 > 2018 > 47(8): 804004-0804004(8)

陈川, 易维宁, 崔文煜. 基于参考源的空间目标红外辐射特性测量[J]. 红外与激光工程, 2018, 47(8): 804004-0804004(8). doi: 10.3788/IRLA201847.0804004

引用本文:

陈川, 易维宁, 崔文煜. 基于参考源的空间目标红外辐射特性测量[J]. 红外与激光工程, 2018, 47(8): 804004-0804004(8). doi: 10.3788/IRLA201847.0804004

Chen Chuan, Yi Weining, Cui Wenyu. Measurement of infrared radiation characteristics of spatial target based on reference source[J]. Infrared and Laser Engineering, 2018, 47(8): 804004-0804004(8). doi: 10.3788/IRLA201847.0804004

Citation:

Chen Chuan, Yi Weining, Cui Wenyu. Measurement of infrared radiation characteristics of spatial target based on reference source[J]. Infrared and Laser Engineering, 2018, 47(8): 804004-0804004(8). doi: 10.3788/IRLA201847.0804004

基于参考源的空间目标红外辐射特性测量

doi: 10.3788/IRLA201847.0804004

1.
中国科学院安徽光学精密机械研究所通用光学定标与表征技术重点实验室,安徽合肥 230031;
2.
中国科学技术大学,安徽合肥 230026

基金项目:

中国科学院创新基金（CXJJ-17S004）

详细信息

作者简介:
陈川(1989-),男,博士生,主要从事目标红外辐射特性测量、全链路成像仿真方面的研究。Email:chuanch@mail.ustc.edu.cn

中图分类号: TN911.73

Measurement of infrared radiation characteristics of spatial target based on reference source

1.
Key Laboratory of Optical Calibration and Characterization,Anhui Institute of Optics and Fine Mechanics,Chinese Academy of Sciences,Hefei 230031,China;
2.
University of Science and Technology of China,Hefei 230026,China

摘要: 地基测量是获取空间目标红外辐射特性的主要手段。地基测量由于大气影响，测量结果含有严重误差。利用由大气光学参数测量设备和辐射传输软件构成的大气同步修正系统，可以减小大气影响引入的误差。然而，由于典型大气模式和测量参数精度限制，经大气修正后的测量误差仍高于20%。提出一种基于红外标准星的辐射测量方法，使用与目标具有相近观测仰角的红外标准星作为参考源，准确获取空间目标观测光路上的透过率，分析了水汽、臭氧和观测仰角对透过率精度的影响。进行了红外星测量实验，利用文中方法测量的目标辐射误差为4.65%，明显优于传统方法的14.57%。结果说明文中方法能作为一种获取空间目标红外辐射的有效途径。
- 辐射测量 /
- 红外星 /
- 空间目标
Abstract: Ground-based measurement is a principal method to obtain the infrared radiation characteristics of spatial target. The measuring result contains significant deviation caused by the atmosphere's influence. The deviation can be reduced by using atmospheric synchronous correction system, which is composed of atmospheric optical parameters measurement equipment and radiation transfer software. However, due to the restriction of typical atmosphere models and precision of measured parameters, the corrected measurement accuracy is also greater than 20%. A radiation measurement method based on infrared standard star was proposed by using standard star which view pitch angle approximated to spatial target's as a reference source, which could obtain precisely the transmittance of optical path from measurement system to spatial target, and the transmittance accuracy affected by water vapor, ozone and observation elevation were analyzed. The experiment of measuring the infrared stars was carried out. The radiation error of the target measured by this method is 4.65%, which is better than the classic method's 14.57%. The result shows that the proposed method can provide an effective way for acquisition of infrared radiation characteristics of spatial target.
- radiation measurement /
- infrared star /
- spatial target

[1]	Cui Wenyu, Chen Chuan, Yi Weining. Radiation characteristic inversion of space point source target based on infrared imagery[C]//SPIE, 2015, 9674:96742Y.
[2]	Wang Guoqiang, Wu Yuanhao. Ground-based measurement on the infrared characteristic of space target[J]. Infrared and Laser Engineering, 2011, 40(9):1634-1639. (in Chinese)王国强, 吴元昊. 空间目标红外辐射特征的地基测量[J].红外与激光工程, 2011, 40(9):1634-1639.
[3]	Yang Ciyin, Zhang Jianping, Cao Lihua. Infrared radiation measurement based on real-time correction[J]. Journal of Infrared and Millimeter Waves, 2011, 30(3):284-288. (in Chinese)杨词银, 张建萍, 曹立华. 基于实时标校的目标红外辐射测量新方法[J]. 红外与毫米波学报, 2011, 30(3):284-288.
[4]	Wei Heli, Dai Congming. Research of atmospheric transfer correction in radiance measurement:atmospheric transfer correction system[J]. Infrared and Laser Engineering, 2014, 43(4):1019-1024. (in Chinese)魏合理, 戴聪明. 辐射特性测量大气传输修正研究:大气传输修正系统[J]. 红外与激光工程, 2014, 43(4):1019-1024.
[5]	Wei Heli, Chen Xiuhong, Zhan Jie, et al. Atmospheric correction in measurement of infrared radiance[J]. Journal of Atmospheric and Environmental Optics, 2007, 2(6):472-478. (in Chinese)魏合理, 陈秀红, 詹杰,等. 红外辐射测量的大气修正[J]. 大气与环境光学学报, 2007, 2(6):472-478.
[6]	Liao Guonan, Guo Caili, Zhou Shijian. An Introduction to Atmospheric Radiation[M]. Beijing:China Meteorological Press, 2004:122-123. (in Chinese)廖国男, 郭彩丽, 周诗健. 大气辐射导论[M]. 北京:气象出版社, 2004:122-123.
[7]	Huang Chen, Wang Jianjun, Gao Xin, et al. Application of infrared star catalog in ground-based infrared radiation measurement system[J]. Infrared and Laser Engineering, 2013, 42(11):2901-2906. (in Chinese)黄晨, 王建军, 高昕, 等.红外星表在地基红外辐射测量系统中的应用[J]. 红外与激光工程, 2013, 42(11):2901-2906.
[8]	Wright E L, Eisenhardt P R, Mainzer A K, et al. The Wide-field Infrared Survey Explorer (WISE):mission description and initial on-orbit performance[J]. Web Science, 2010, 140(6):1868-1881.

[1]	于鲲, 郭彪, 丛明煜. 空间目标临边探测背景红外成像建模与图像仿真 . 红外与激光工程, 2019, 48(9): 904005-0904005(10). doi: 10.3788/IRLA201948.0904005
[2]	陈博, 穆磊, 张彪, 许传龙. 地形条件对空间目标细致光谱辐射特性的影响 . 红外与激光工程, 2019, 48(12): 1213003-1213003(8). doi: 10.3788/IRLA201948.1213003
[3]	^&陈双远, ^&张芳, 齐琳琳, 韩成鸣, 曾丽, 许方宇. 国内典型天文台站大气红外背景辐射实测分析 . 红外与激光工程, 2019, 48(12): 1203010-1203010(9). doi: 10.3788/IRLA201948.1203010
[4]	于欢欢, 沈鸣, 高鹏骐, 孙明国, 郭效忠, 赵有. APOSOS光电望远镜空间目标观测精度分析 . 红外与激光工程, 2017, 46(1): 117002-0117002(7). doi: 10.3788/IRLA201746.0117002
[5]	李文豪, 刘朝晖, 穆猷, 梁冬生, 杨蕊. 基于辐射散热的空间目标红外特性建模与研究 . 红外与激光工程, 2017, 46(6): 604003-0604003(7). doi: 10.3788/IRLA201746.0604003
[6]	杨帆, 宣益民, 韩玉阁. 航天器起伏表面的红外辐射特性 . 红外与激光工程, 2016, 45(5): 504003-0504003(6). doi: 10.3788/IRLA201645.0504003
[7]	庄绪霞, 阮宁娟, 赵思思. 基于点目标测量的空间目标特性识别技术 . 红外与激光工程, 2016, 45(S1): 194-199. doi: 10.3788/IRLA201645.S126001
[8]	汪洪源, 陈赟. 天基空间目标红外动态辐射特性建模与仿真 . 红外与激光工程, 2016, 45(5): 504002-0504002(6). doi: 10.3788/IRLA201645.0504002
[9]	王建军, 黄晨, 李舰艇. 空间目标红外辐射测量系统标定技术 . 红外与激光工程, 2016, 45(4): 404002-0404002(5). doi: 10.3788/IRLA201645.0404002
[10]	孙成明, 袁艳, 赵飞. 空间目标天基成像探测信噪比分析 . 红外与激光工程, 2015, 44(5): 1654-1659.
[11]	滕书华, 鲁敏, 马燕新, 杨阿锋, 张军. 一种基于光学测量的航天器结构分析方法 . 红外与激光工程, 2015, 44(11): 3317-3323.
[12]	王盈, 黄建明, 魏祥泉. 空间目标在轨红外成像仿真 . 红外与激光工程, 2015, 44(9): 2593-2597.
[13]	刘夫成, 刘朝晖, 刘文, 梁冬生, 袁辉. 基于STK/matlab 的空间目标序列星图仿真 . 红外与激光工程, 2014, 43(9): 3157-3161.
[14]	康文运, 宋小全, 韦震. 白天空间目标激光测距微弱信号探测方法 . 红外与激光工程, 2014, 43(9): 3026-3029.
[15]	张己化, 范如玉, 赵宁, 蔡雷, 白鑫. 强背景下光电系统空间目标探测能力 . 红外与激光工程, 2014, 43(1): 212-216.
[16]	舒锐, 周彦平, 卢春莲. 基于多光谱辐射特性差异的最佳探测波段的确定方法 . 红外与激光工程, 2014, 43(8): 2505-2512.
[17]	韩意, 孙华燕. 空间目标光学散射特性研究进展 . 红外与激光工程, 2013, 42(3): 758-766.
[18]	孟庆宇, 张伟, 龙夫年. 天基空间目标可见光相机探测能力分析 . 红外与激光工程, 2012, 41(8): 2079-2084.
[19]	李雅男, 孙晓兵, 毛永娜, 乔延利, 洪津. 空间目标光谱偏振特性 . 红外与激光工程, 2012, 41(1): 205-210.
[20]	王盈, 来霄毅, 黄建明, 魏祥泉. 基于Sinda/G和Matlab的空间目标红外辐射特性分析 . 红外与激光工程, 2012, 41(5): 1113-1118.

点击查看大图

计量

文章访问数: 410
HTML全文浏览量: 41
PDF下载量: 62
被引次数: 0

基于参考源的空间目标红外辐射特性测量

doi: 10.3788/IRLA201847.0804004

1. 中国科学院安徽光学精密机械研究所通用光学定标与表征技术重点实验室,安徽合肥 230031;

2. 中国科学技术大学,安徽合肥 230026

作者简介:
陈川(1989-),男,博士生,主要从事目标红外辐射特性测量、全链路成像仿真方面的研究。Email:chuanch@mail.ustc.edu.cn

收稿日期: 2018-03-13
修回日期: 2018-04-17
刊出日期: 2018-08-25

基金项目:

中国科学院创新基金（CXJJ-17S004）

中图分类号: TN911.73

关键词:

摘要: 地基测量是获取空间目标红外辐射特性的主要手段。地基测量由于大气影响，测量结果含有严重误差。利用由大气光学参数测量设备和辐射传输软件构成的大气同步修正系统，可以减小大气影响引入的误差。然而，由于典型大气模式和测量参数精度限制，经大气修正后的测量误差仍高于20%。提出一种基于红外标准星的辐射测量方法，使用与目标具有相近观测仰角的红外标准星作为参考源，准确获取空间目标观测光路上的透过率，分析了水汽、臭氧和观测仰角对透过率精度的影响。进行了红外星测量实验，利用文中方法测量的目标辐射误差为4.65%，明显优于传统方法的14.57%。结果说明文中方法能作为一种获取空间目标红外辐射的有效途径。

English Abstract

Measurement of infrared radiation characteristics of spatial target based on reference source

1. Key Laboratory of Optical Calibration and Characterization,Anhui Institute of Optics and Fine Mechanics,Chinese Academy of Sciences,Hefei 230031,China;

2. University of Science and Technology of China,Hefei 230026,China

Received Date: 2018-03-13
Rev Recd Date: 2018-04-17
Publish Date: 2018-08-25

Keywords:

Abstract: Ground-based measurement is a principal method to obtain the infrared radiation characteristics of spatial target. The measuring result contains significant deviation caused by the atmosphere's influence. The deviation can be reduced by using atmospheric synchronous correction system, which is composed of atmospheric optical parameters measurement equipment and radiation transfer software. However, due to the restriction of typical atmosphere models and precision of measured parameters, the corrected measurement accuracy is also greater than 20%. A radiation measurement method based on infrared standard star was proposed by using standard star which view pitch angle approximated to spatial target's as a reference source, which could obtain precisely the transmittance of optical path from measurement system to spatial target, and the transmittance accuracy affected by water vapor, ozone and observation elevation were analyzed. The experiment of measuring the infrared stars was carried out. The radiation error of the target measured by this method is 4.65%, which is better than the classic method's 14.57%. The result shows that the proposed method can provide an effective way for acquisition of infrared radiation characteristics of spatial target.

全文HTML

参考文献 (8)

下载: 全尺寸图片幻灯片

返回文章

用微信扫码二维码

分享至好友和朋友圈

留言板

基于参考源的空间目标红外辐射特性测量

doi: 10.3788/IRLA201847.0804004

作者简介: 陈川(1989-),男,博士生,主要从事目标红外辐射特性测量、全链路成像仿真方面的研究。Email:chuanch@mail.ustc.edu.cn

Measurement of infrared radiation characteristics of spatial target based on reference source

计量

出版历程

基于参考源的空间目标红外辐射特性测量

doi: 10.3788/IRLA201847.0804004

1. 中国科学院安徽光学精密机械研究所 通用光学定标与表征技术重点实验室,安徽 合肥 230031; 2. 中国科学技术大学,安徽 合肥 230026

作者简介: 陈川(1989-),男,博士生,主要从事目标红外辐射特性测量、全链路成像仿真方面的研究。Email:chuanch@mail.ustc.edu.cn

English Abstract

Measurement of infrared radiation characteristics of spatial target based on reference source

1. Key Laboratory of Optical Calibration and Characterization,Anhui Institute of Optics and Fine Mechanics,Chinese Academy of Sciences,Hefei 230031,China; 2. University of Science and Technology of China,Hefei 230026,China

全文HTML

目录

作者简介:
陈川(1989-),男,博士生,主要从事目标红外辐射特性测量、全链路成像仿真方面的研究。Email:chuanch@mail.ustc.edu.cn

1. 中国科学院安徽光学精密机械研究所通用光学定标与表征技术重点实验室,安徽合肥 230031;

2. 中国科学技术大学,安徽合肥 230026

作者简介:
陈川(1989-),男,博士生,主要从事目标红外辐射特性测量、全链路成像仿真方面的研究。Email:chuanch@mail.ustc.edu.cn

1. Key Laboratory of Optical Calibration and Characterization,Anhui Institute of Optics and Fine Mechanics,Chinese Academy of Sciences,Hefei 230031,China;

2. University of Science and Technology of China,Hefei 230026,China