留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

圆柱铁氧体微裂纹的激光扫描热成像检测

王晓娜 姚行洲 侯德鑫 叶树亮

王晓娜, 姚行洲, 侯德鑫, 叶树亮. 圆柱铁氧体微裂纹的激光扫描热成像检测[J]. 红外与激光工程, 2018, 47(11): 1106005-1106005(7). doi: 10.3788/IRLA201847.1106005
引用本文: 王晓娜, 姚行洲, 侯德鑫, 叶树亮. 圆柱铁氧体微裂纹的激光扫描热成像检测[J]. 红外与激光工程, 2018, 47(11): 1106005-1106005(7). doi: 10.3788/IRLA201847.1106005
Wang Xiaona, Yao Xingzhou, Hou Dexin, Ye Shuliang. Detection of microcrack in cylinder ferrite components based on scanning laser thermography[J]. Infrared and Laser Engineering, 2018, 47(11): 1106005-1106005(7). doi: 10.3788/IRLA201847.1106005
Citation: Wang Xiaona, Yao Xingzhou, Hou Dexin, Ye Shuliang. Detection of microcrack in cylinder ferrite components based on scanning laser thermography[J]. Infrared and Laser Engineering, 2018, 47(11): 1106005-1106005(7). doi: 10.3788/IRLA201847.1106005

圆柱铁氧体微裂纹的激光扫描热成像检测

doi: 10.3788/IRLA201847.1106005
基金项目: 

国家重大科学仪器设备开发专项(2013YQ470767)

详细信息
    作者简介:

    王晓娜(1975-),女,副教授,硕士,主要从事几何精密测量与光电检测技术方面的研究。Email:wangxn@cjlu.edu.cn

  • 中图分类号: TN249

Detection of microcrack in cylinder ferrite components based on scanning laser thermography

  • 摘要: 针对用激光局部加热试样引起的横向热流检测裂纹,对低热导率材料表面的微小裂纹成像信噪比较低的问题,提出基于相邻热信号比较的圆柱铁氧体表面微裂纹检测算法。基于几何模型重构运动的圆周表面各点热信号,以激光扫描方向相邻点热信号的欧氏距离作为特征进行成像。仿真分析确定热信号裁剪区间、参考信号位置等算法参数。对6个具有5~35 m宽度自然裂纹的样品进行实验,结果表明,在线激光2.66 mm/s的扫描速度下,裂纹成像信噪比相比常规方法提高1~2倍,可清晰成像出裂纹的形状。
  • [1] Yan Huipeng, Yang Zhengwei, Tian Gan, et al. Micro crack detection near surface of ferromagnetic materials based on eddy current thermography[J]. Infrared and Laser Engineering, 2017, 46(3):0317001. (in Chinese)闫会朋, 杨正伟, 田干,等. 基于涡流热成像的铁磁材料近表面微裂纹检测[J]. 红外与激光工程, 2017, 46(3):0317001.
    [2] Nan Gangyang, Wang Qiwu, Zhang Zhenzhen, et al. Rail steel flaw inspection based on laser ultrasonic method[J]. Infrared and Laser Engineering, 2017, 46(1):0106006. (in Chinese)南钢洋, 王启武, 张振振, 等. 基于激光超声方法的钢轨缺陷检测(英文)[J]. 红外与激光工程, 2017, 46(1):0106006.
    [3] Burrows S E, Dixon S, Pickering S G, et al. Thermographic detection of surface breaking defects using a scanning laser source[J]. NDT E International, 2011, 44(7):589-596.
    [4] Schlichting J, Ziegler M, Maierhofer C, et al. Flying laser spot thermography for the fast detection of surface breaking cracks[C]//18th World Conference on Nondestructive Testing, 2012.
    [5] Kubiak E J. Infrared detection of fatigue cracks and other near-surface defects[J]. Applied Optics, 1968, 7(7):1743-1748.
    [6] An Y K, Yang J, Hwang S, et al. Line laser lock-in thermography for instantaneous imaging of cracks in semiconductor chips[J]. Optics Lasers in Engineering, 2015, 73(1):128-136.
    [7] Li T, Almond D P, Rees D A S, et al. Crack imaging by pulsed laser spot thermography[C]//Journal of Physics Conference Series, 2010.
    [8] Fedala Y, Streza M, Sepulveda F, et al. Infrared lock-in thermography crack localization on metallic surfaces for industrial diagnosis[J]. Journal of Nondestructive Evaluation, 2013, 33(3):970-972.
    [9] Gruss C, Balageas D. Theoretical and experimental applications of the flying spot camera[C]//Conference on Quantitative Infrared Thermography, 1992.
    [10] Hermosillalara S, Joubert P Y, Placko D. Identification of physical effects in flying spot photothermal non-destructive testing[J]. European Physical Journal Applied Physics, 2003, 24(3):223-229.
    [11] Li T, Almond D P, Rees D A S. Crack imaging by scanning laser-line thermography and laser-spot thermography[J]. Measurement Science Technology, 2011, 22(3):315-322.
    [12] Lugin S. Detection of hidden defects by lateral thermal flows[J]. NDT E International, 2013, 56(2):48-55.
    [13] Wang Xiaoning, Hou Dexin, Ye Shuliang. Crack detection of ferrite based on laser spot thermography[J]. Laser Infrared. 2015, 45(11):1298-1303. (in Chinese)王晓宁, 侯德鑫, 叶树亮. 基于激光热成像的铁氧体裂纹检测[J]. 激光与红外, 2015, 45(11):1298-1303.
    [14] Wang Xiaona, Wang Xiaoning, Hou Dexin, et al. Surface crack imaging based on delayed temperature difference at symmetric points by laser spot thermography[J]. Instrumentation, 2014, 1(2):30-37.
    [15] Wang Y Q, Kuo P K, Favro L D, et al. Flying laser spot thermal wave IR imaging of horizontal and vertical cracks[J]. Review of Progress in Quantitative Nondestructive Evaluation, 1990, 9:511-516.
    [16] Hidalgogato R, Andrs J R, Lpezhiguera J M, et al. Quantification by signal to noise ratio of active infrared thermography data processing techniques[J]. Optics Photonics Journal, 2013, 3(4):20-26.
    [17] Schlichting J, Maierhofer C, Kreutzbruck M. Defect sizing by local excitation thermography[J]. Quantitative Infrared Thermography Journal, 2011, 8(1):51-63.
  • [1] 冯杰, 冯扬, 刘翔, 邓陈进, 喻忠军.  远距离监视激光雷达动目标快速检测 . 红外与激光工程, 2023, 52(4): 20220506-1-20220506-9. doi: 10.3788/IRLA20220506
    [2] 王慧鹏, 翟思聪, 杨洁, 董丽虹, 王海斗.  基于激光热成像的铝合金表面裂纹宽度定量检测 . 红外与激光工程, 2023, 52(9): 20220902-1-20220902-10. doi: 10.3788/IRLA20220902
    [3] 林丽, 刘新, 朱俊臻, 冯辅周.  基于CNN的金属疲劳裂纹超声红外热像检测与识别方法研究 . 红外与激光工程, 2022, 51(3): 20210227-1-20210227-9. doi: 10.3788/IRLA20210227
    [4] 王晓娜, 张亦舒, 侯德鑫, 叶树亮.  基于线激光正交扫描的电感微裂纹热成像检测 . 红外与激光工程, 2020, 49(7): 20190522-1-20190522-8. doi: 10.3788/IRLA20190522
    [5] 朱鑫浩, 侯德鑫, 叶树亮.  圆柱面任意方向裂纹的双线阵激光热像检测 . 红外与激光工程, 2020, 49(9): 20200097-1-20200097-9. doi: 10.3788/IRLA20200097
    [6] 王强, 胡秋平, 邱金星, 裴翠祥, 刘铭, 李欣屹, 周洪斌.  航空复合材料内部缺陷差动式激光红外热成像检测 . 红外与激光工程, 2019, 48(5): 504003-0504003(7). doi: 10.3788/IRLA201948.0504003
    [7] 杨正伟, 谢星宇, 李胤, 张炜, 田干.  激光扫描热成像无损检测关键参数影响分析 . 红外与激光工程, 2019, 48(11): 1105008-1105008(11). doi: 10.3788/IRLA201948.1105008
    [8] 寇光杰, 杨正伟, 贾庸, 张炜, 杜莹.  复杂型面叶片裂纹的超声红外热成像检测 . 红外与激光工程, 2019, 48(12): 1204002-1204002(9). doi: 10.3788/IRLA201948.1204002
    [9] 李超, 申力, 施斐斐.  同轴空心激光检测圆柱内孔圆度误差的方法研究 . 红外与激光工程, 2018, 47(S1): 1-4. doi: 10.3788/IRLA201847.S106001
    [10] 孙吉伟, 冯辅周, 闵庆旭, 徐超, 黄楠.  涡流脉冲热像检测中疲劳裂纹的检出概率 . 红外与激光工程, 2018, 47(5): 504002-0504002(6). doi: 10.3788/IRLA201847.0504002
    [11] 李晓捷, 王佳, 耿磊, 叶琨.  边缘恢复的大尺寸平面零件测量方法 . 红外与激光工程, 2018, 47(4): 417006-0417006(9). doi: 10.3788/IRLA201847.0417006
    [12] 郭伟, 董丽虹, 王海斗, 马润波, 向明, 徐滨士.  喷涂层下基体中裂纹缺陷的超声红外识别方法 . 红外与激光工程, 2018, 47(S1): 36-43. doi: 10.3788/IRLA201847.S104001
    [13] 闫会朋, 杨正伟, 田干, 明安波, 张炜.  基于涡流热成像的铁磁材料近表面微裂纹检测 . 红外与激光工程, 2017, 46(3): 317001-0317001(6). doi: 10.3788/IRLA201746.0317001
    [14] 范有臣, 赵洪利, 孙华燕, 郭惠超, 赵延仲.  激光主动成像结合距离选通技术的零时信号测量方法 . 红外与激光工程, 2016, 45(3): 306004-0306004(7). doi: 10.3788/IRLA201645.0306004
    [15] 冯辅周, 张超省, 宋爱斌, 闵庆旭, 朱俊臻.  超声红外热像检测中疲劳裂纹的检出概率模型研究 . 红外与激光工程, 2016, 45(3): 304005-0304005(6). doi: 10.3788/IRLA201645.0304005
    [16] 战宇, 刘常升, 薛俊川.  等效载荷法模拟激光超声微裂纹检测 . 红外与激光工程, 2016, 45(10): 1006004-1006004(5). doi: 10.3788/IRLA201645.1006004
    [17] 马说邯, 刘欣博, 马齐爽.  高阶累积量在红外热像损伤检测信号分析中的应用 . 红外与激光工程, 2013, 42(5): 1350-1354.
    [18] 赵大鹏, 时家明, 汪家春, 王启超, 王伟.  偏振热成像系统的作用距离分析 . 红外与激光工程, 2013, 42(5): 1146-1152.
    [19] 秦雷, 刘俊岩, 龚金龙, 姜斌, 王扬.  超声红外锁相热像技术检测金属板材表面裂纹 . 红外与激光工程, 2013, 42(5): 1123-1130.
    [20] 刘俊岩, 刘 勋, 王 扬, .  线性调频激励的红外热波成像检测技术 . 红外与激光工程, 2012, 41(6): 1416-1422.
  • 加载中
计量
  • 文章访问数:  464
  • HTML全文浏览量:  80
  • PDF下载量:  46
  • 被引次数: 0
出版历程
  • 收稿日期:  2018-06-08
  • 修回日期:  2018-07-14
  • 刊出日期:  2018-11-25

圆柱铁氧体微裂纹的激光扫描热成像检测

doi: 10.3788/IRLA201847.1106005
    作者简介:

    王晓娜(1975-),女,副教授,硕士,主要从事几何精密测量与光电检测技术方面的研究。Email:wangxn@cjlu.edu.cn

基金项目:

国家重大科学仪器设备开发专项(2013YQ470767)

  • 中图分类号: TN249

摘要: 针对用激光局部加热试样引起的横向热流检测裂纹,对低热导率材料表面的微小裂纹成像信噪比较低的问题,提出基于相邻热信号比较的圆柱铁氧体表面微裂纹检测算法。基于几何模型重构运动的圆周表面各点热信号,以激光扫描方向相邻点热信号的欧氏距离作为特征进行成像。仿真分析确定热信号裁剪区间、参考信号位置等算法参数。对6个具有5~35 m宽度自然裂纹的样品进行实验,结果表明,在线激光2.66 mm/s的扫描速度下,裂纹成像信噪比相比常规方法提高1~2倍,可清晰成像出裂纹的形状。

English Abstract

参考文献 (17)

目录

    /

    返回文章
    返回