一种简单精确的CCD阵列光谱仪波长定标方法

马艳; 夏果; 黄禅; 王国栋; 金施群

doi:10.3788/IRLA201847.S117002

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

一种简单精确的CCD阵列光谱仪波长定标方法

马艳, 夏果, 黄禅, 王国栋, 金施群

文章导航 > 红外与激光工程 > 2018 > 47(S1): 147-153

马艳, 夏果, 黄禅, 王国栋, 金施群. 一种简单精确的CCD阵列光谱仪波长定标方法[J]. 红外与激光工程, 2018, 47(S1): 147-153. doi: 10.3788/IRLA201847.S117002

引用本文:

马艳, 夏果, 黄禅, 王国栋, 金施群. 一种简单精确的CCD阵列光谱仪波长定标方法[J]. 红外与激光工程, 2018, 47(S1): 147-153. doi: 10.3788/IRLA201847.S117002

Ma Yan, Xia Guo, Huang Chan, Wang Guodong, Jin Shiqun. A simple and accurate wavelength calibration method for CCD-spectrometer[J]. Infrared and Laser Engineering, 2018, 47(S1): 147-153. doi: 10.3788/IRLA201847.S117002

Citation:

Ma Yan, Xia Guo, Huang Chan, Wang Guodong, Jin Shiqun. A simple and accurate wavelength calibration method for CCD-spectrometer[J]. Infrared and Laser Engineering, 2018, 47(S1): 147-153. doi: 10.3788/IRLA201847.S117002

一种简单精确的CCD阵列光谱仪波长定标方法

doi: 10.3788/IRLA201847.S117002

马艳^1,2,3,
夏果^1,2,3,
黄禅^1,2,3,
王国栋^1,2,3,
金施群^1,2,3

1.
合肥工业大学光电技术研究院,安徽合肥 230009;
2.
特种显示技术国家工程实验室,安徽合肥 230009;
3.
现代显示技术省部共建国家重点实验室,安徽合肥 230009

基金项目:

国家重大科学仪器设备开发专项（2013YQ220749）;中央高校基本科研业务费专项资金（JZ2016HGBZ0754）

详细信息

作者简介:
马艳(1995-),女,硕士生,主要从事光谱预处理方面的研究。Email:cmayanx@163.com

中图分类号: TH744

A simple and accurate wavelength calibration method for CCD-spectrometer

Ma Yan^1,2,3,
Xia Guo^1,2,3,
Huang Chan^1,2,3,
Wang Guodong^1,2,3,
Jin Shiqun^1,2,3

1.
Academy of Photoelectric Technology,Hefei University of Technology,Hefei 230009,China;
2.
National Engineering Laboratory of Special Display Technology,Hefei 230009,China;
3.
National Key Laboratory of Advanced Display Technology,Hefei 230009,China

摘要: 波长定标是CCD光谱仪的重要步骤，其准确性会影响光谱仪测量结果的精确度。然而传统波长定标精度受仪器带宽和噪声的影响：带宽会导致定标光谱中产生重叠峰或双峰的峰位移；噪声会使峰值点的测量不准确。为解决这个问题，提出了一种简单精确的CCD光谱仪波长定标方法。使用自动分解算法和Voigt线状谱模型来优化定标光谱的形状，并且可以获得每个定标峰的峰值点的精确值。利用该方法可以消除带宽和噪声的影响，特别是重叠峰可以被同时分解成几个单峰，极大地简化了定标过程。实施基于USB4000光谱仪和汞氩校准光源的波长定标实验。结果表明，相比于传统方法，该方法可以达到较高的精度且定标误差小于0.1 nm。因此，推荐使用该方法对光谱仪进行波长定标。
- CCD /
- 光谱分析 /
- 微型光谱仪 /
- 计量
Abstract: Wavelength calibration is an important step for CCD-spectrometers. The accuracy of the wavelength calibration will affect the precision of the measurement results. However, the accuracy of traditional wavelength calibration will be affected by instrument bandwidth and noise. The bandwidth of the instrument will generate the overlapping peaks in the calibration spectrum or cause the peak position shift of double peak. The noise will make inaccurate measurement of peak point. To solve this problem, a simple and accurate wavelength calibration method for CCD-spectrometer was proposed. The automated decomposition algorithm and Voigt line profile model were used to optimize the shape of the calibration spectrum and the precision value of the peak points of each calibration peak could be obtained. Using this method, the influence of bandwidth and noise could be eliminated, especially the overlap peaks could be decomposed into several single peaks, simultaneously, and the process of calibration was greatly simplified. Experiments based on USB4000 spectrometer with mercury-argon calibration light source were implemented. The results show that the proposed method could achieve higher accuracy and the calibration deviation is less than 0.1 nm. Therefore, it is recommended to use this method to calibrate the wavelength of the spectrometer.
- CCD /
- spectrum analysis /
- micro spectrometer /
- metrology

[1]	Zonios G. Noise and stray light characterization of a compact CCD spectrophotometer used in biomedical applications[J]. Applied Optics, 2010, 49(2):163-169.
[2]	Eichstdt S, Schmhling F, Wbbeler G, et al. Comparison of the Richardson-Lucy method and a classical approach for spectrometer bandpass correction[J]. Metrologia, 2013, 50(2):107-118.
[3]	Sansonetti C J, Salit M L, Reader J. Wavelengths of spectral lines in mercury pencil lamps[J]. Applied Optics, 1996, 35(1):78-83.
[4]	Martinsen P, Jordan B, Mcglone A, et al. Accurate and precise wavelength calibration for wide bandwidth array spectrometers[J]. Applied Spectroscopy, 2008, 62(9):1008-1012.
[5]	Yu F. Accurate wavelength calibration method using system parameters for grating spectrometers[J]. Optical Engineering, 2013, 52(1):3603.
[6]	Li X, Zhang G W, Xun L N, et al. Wavelength calibration of shortwave infrared flat spectroradiometer[J]. Acta Optica Sinica, 2008, 28(5):902-906.
[7]	Sun Y C, Huang C, Xia G, et al. Accurate wavelength calibration method for compact CCD spectrometer[J]. Journal of the Optical Society of America-A Optics Image Science Vision, 2017, 34(4):498.
[8]	Levenberg K. A method for the solution of certain non-linear problems in least squares[J]. Quarterly of Applied Mathematics, 1944, 2(4):436-438.
[9]	Marquardt D W. An algorithm for least-squares estimation of nonlinear parameters[J]. Journal of the Society for Industrial Applied Mathematics, 1964, 11(2):431-441.
[10]	Nocedal J, Wright S J. Numerical Optimization[M]. Berlin:Springer, 1999.
[11]	Sundius T. Computer fitting of voigt profiles to Raman lines[J]. Journal of Raman Spectroscopy, 1973, 1(5):471-488.
[12]	Yuan J, Sun J, Hu Z. High-order cumulant-based blind deconvolution of Raman spectra[J]. Applied Optics, 2005, 44:7595-7601.

[1]	邱鹏, 邹思成, 张晓明, 王建峰, 林亲, 姜晓军. 天文光学相机性能检测技术研究 . 红外与激光工程, 2023, 52(12): 20230316-1-20230316-13. doi: 10.3788/IRLA20230316
[2]	俞婷, 牛春晖, 吕勇. CCD损伤状态的“猫眼”回波信息评估方法 . 红外与激光工程, 2023, 52(5): 20220537-1-20220537-9. doi: 10.3788/IRLA20220537
[3]	马维喆, 董美蓉, 黄泳如, 童琪, 韦丽萍, 陆继东. 激光诱导击穿光谱的飞灰碳含量定量分析方法 . 红外与激光工程, 2021, 50(9): 20200441-1-20200441-10. doi: 10.3788/IRLA20200441
[4]	刘舒扬, 张晨, 赵安娜, 李奇峰, 贾晓东. 基于光谱特性的高判别准确度激光近场探测传感器研究 . 红外与激光工程, 2020, 49(4): 0403009-0403009-5. doi: 10.3788/IRLA202049.0403009
[5]	字崇德, 李昀谦, 祖永祥, 陈林森, 曹汛. 多传感器光谱视频成像系统中的图像对齐研究 . 红外与激光工程, 2019, 48(6): 603019-0603019(8). doi: 10.3788/IRLA201948.0603019
[6]	李洪波, 胡炳樑, 余璐, 孔亮, 于涛, 高晓惠. 基于类对比度的CCD相关双采样自适应技术 . 红外与激光工程, 2018, 47(3): 320003-0320003(7). doi: 10.3788/IRLA201847.0320003
[7]	王彦斌, 刘艳芳, 陈前荣, 李华, 周旋风, 任广森, 朱荣臻. CCD光敏面上激光能量的网状分布 . 红外与激光工程, 2018, 47(S1): 125-131. doi: 10.3788/IRLA201847.S120005
[8]	陈前荣, 亓凤杰, 王彦斌, 张文攀, 李华. 激光干扰CCD规则亮点分布原理研究 . 红外与激光工程, 2016, 45(11): 1106007-1106007(5). doi: 10.3788/IRLA201645.1106007
[9]	熊俊, 夏媛, 杨勇, 程学武, 李发泉. 基于CCD图像智能分析的激光主动规避飞行物系统 . 红外与激光工程, 2016, 45(S1): 65-70. doi: 10.3788/IRLA201645.S106005
[10]	刘慧, 刘学斌, 陈小来, 孔亮, 刘永征. 基于驱动时序控制CCD曝光时间的设计与实现 . 红外与激光工程, 2015, 44(S1): 199-204.
[11]	张宁, 刘宇龙, 吴嘉辉, 徐熙平. 微型光谱仪的CCD 数据采集系统设计 . 红外与激光工程, 2015, 44(1): 141-147.
[12]	郭彦池, 徐熙平, 乔杨, 米士隆, 杜玉楠. 大视场宽谱段星敏感器光学系统设计 . 红外与激光工程, 2014, 43(12): 3969-3972.
[13]	陶宗明, 刘东, 麻晓敏, 陈向春, 王珍珠, 谢晨波, 王英俭. 基于CCD的侧向激光雷达系统研制及探测个例 . 红外与激光工程, 2014, 43(10): 3282-3286.
[14]	蔺辉, 刘立力, 田新锋, 郝芸. 强激光近场分布测量中科学级CCD 的非均匀性校正 . 红外与激光工程, 2014, 43(7): 2108-2111.
[15]	王士绅, 隋修宝, 陈钱, 顾国华. 高速高清CCD自适应相关双采样技术 . 红外与激光工程, 2014, 43(1): 155-159.
[16]	周跃, 闫丰, 章明朝. CCD光电参数测试系统的研制 . 红外与激光工程, 2014, 43(10): 3451-3456.
[17]	张景超, 闫玺, 朱艳英, 李潮洋, 李贺光, 胡学良. 激光双路对称透射法在线测量平板玻璃厚度 . 红外与激光工程, 2013, 42(10): 2812-2816.
[18]	程巳阳, 高闽光, 徐亮, 冯明春, 张天舒, 刘建国, 刘文清. 高温气体浓度光谱分析中的温度修正方法 . 红外与激光工程, 2013, 42(2): 413-417.
[19]	邹前进, 陈前荣, 黄振宇, 李华, 黄成功, 亓凤杰, 王彦斌. 激光干扰CCD规律圆形条纹作用机理分析 . 红外与激光工程, 2013, 42(8): 2017-2021.
[20]	张俊举, 常本康, 张宝辉, 闵超波, 袁轶慧, 姜斌. 远距离红外与微光/可见光融合成像系统 . 红外与激光工程, 2012, 41(1): 20-24.

点击查看大图

计量

文章访问数: 629
HTML全文浏览量: 151
PDF下载量: 68
被引次数: 0

一种简单精确的CCD阵列光谱仪波长定标方法

doi: 10.3788/IRLA201847.S117002

1. 合肥工业大学光电技术研究院,安徽合肥 230009;

2. 特种显示技术国家工程实验室,安徽合肥 230009;

3. 现代显示技术省部共建国家重点实验室,安徽合肥 230009

作者简介:
马艳(1995-),女,硕士生,主要从事光谱预处理方面的研究。Email:cmayanx@163.com

收稿日期: 2018-02-20
修回日期: 2018-04-15
刊出日期: 2018-06-25

基金项目:

国家重大科学仪器设备开发专项（2013YQ220749）;中央高校基本科研业务费专项资金（JZ2016HGBZ0754）

中图分类号: TH744

关键词:

CCD /
光谱分析 /
微型光谱仪 /
计量

摘要: 波长定标是CCD光谱仪的重要步骤，其准确性会影响光谱仪测量结果的精确度。然而传统波长定标精度受仪器带宽和噪声的影响：带宽会导致定标光谱中产生重叠峰或双峰的峰位移；噪声会使峰值点的测量不准确。为解决这个问题，提出了一种简单精确的CCD光谱仪波长定标方法。使用自动分解算法和Voigt线状谱模型来优化定标光谱的形状，并且可以获得每个定标峰的峰值点的精确值。利用该方法可以消除带宽和噪声的影响，特别是重叠峰可以被同时分解成几个单峰，极大地简化了定标过程。实施基于USB4000光谱仪和汞氩校准光源的波长定标实验。结果表明，相比于传统方法，该方法可以达到较高的精度且定标误差小于0.1 nm。因此，推荐使用该方法对光谱仪进行波长定标。

English Abstract

A simple and accurate wavelength calibration method for CCD-spectrometer

1. Academy of Photoelectric Technology,Hefei University of Technology,Hefei 230009,China;

2. National Engineering Laboratory of Special Display Technology,Hefei 230009,China;

3. National Key Laboratory of Advanced Display Technology,Hefei 230009,China

Received Date: 2018-02-20
Rev Recd Date: 2018-04-15
Publish Date: 2018-06-25

Keywords:

Abstract: Wavelength calibration is an important step for CCD-spectrometers. The accuracy of the wavelength calibration will affect the precision of the measurement results. However, the accuracy of traditional wavelength calibration will be affected by instrument bandwidth and noise. The bandwidth of the instrument will generate the overlapping peaks in the calibration spectrum or cause the peak position shift of double peak. The noise will make inaccurate measurement of peak point. To solve this problem, a simple and accurate wavelength calibration method for CCD-spectrometer was proposed. The automated decomposition algorithm and Voigt line profile model were used to optimize the shape of the calibration spectrum and the precision value of the peak points of each calibration peak could be obtained. Using this method, the influence of bandwidth and noise could be eliminated, especially the overlap peaks could be decomposed into several single peaks, simultaneously, and the process of calibration was greatly simplified. Experiments based on USB4000 spectrometer with mercury-argon calibration light source were implemented. The results show that the proposed method could achieve higher accuracy and the calibration deviation is less than 0.1 nm. Therefore, it is recommended to use this method to calibrate the wavelength of the spectrometer.